Electro Harmonix Canyon Echo Manual


Læs gratis den danske manual til Electro Harmonix Canyon Echo (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Canyon Echo, eller vil du spørge andre brugere om produktet?

Side 1/4
CANYON
ECHO
User Manual
Multi-Function Digital Delay
Welcome to the Electro-Harmonix Canyon Echo:
an extremely compact digital delay pedal with up
to 3 seconds of delay time. The Canyon Echo fea-
tures tap-tempo—with three different tap-division
options—a filter control to shape the tone of the
repeats, tails mode to keep the repeats going after
switching to bypass, and footswitch accessible
infinite repeats.
Operating Instructions
Insert the output plug from the supplied 9VDC AC
adapter into the power jack at the top of the
Canyon Echo. The unit must be powered to pass
signal, even in bypass. The Canyon Echo features
buffered analog bypass or digital bypass depend-
ing on settings. Connect an instrument cable from
your instrument to the Input jack. Connect an
instrument cable between the Output jack and a
suitable amplifier. Click the footswitch to engage
the pedal and light the LED.
8
9
1 2
5
6
6
3 4
7
BLEND DELAY
FILTER
TAP
DIV
FDBK
Power Suppy Requirements: Voltage: 9VDC Current: 100mA Polarity: Center-Negative
This device comes equipped with an Electro-Harmonix 9.6DC-200 power supply. Use of the wrong adapter or a
plug with the wrong polarity may damage the device and void the warranty. Do not exceed 10.5VDC on the power
plug. Power supplies rated for less than 100mA may cause the device to act unreliably.


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: Canyon Echo

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Canyon Echo stil et spørgsmål nedenfor, og andre brugere vil svare dig