Electro Harmonix Hell Melter Manual

Electro Harmonix Ikke kategoriseret Hell Melter

Læs gratis den danske manual til Electro Harmonix Hell Melter (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Electro Harmonix Hell Melter, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Congratulations, you are now possessed by the Hell Melter. This device

is built to produce the legendary ‘chainsaw’ distortion tone, but with

added features that expand the threat of tonal destruction. Do you

want the gruesome vintage grind found on classic death metal records?

Do you seek added volume, distortion, clarity, or control? Sink deep

into the Hell Melter and you shall nd all the havoc you’ll ever need.

Operating Instructions

Connect your guitar to the INPUT jack of the Hell Melter and the OUTPUT

jack to your amp’s input. Plug in the included power supply and plug its

output plug into the Hell Melter’s power jack. Press the EFFECT footswitch

to ensure the red LED is lit, and the Hell Melter is ready.

A good starting point is to turn all the knobs (except for DRY LVL and GATE)

to their maximum positions and play the heaviest riffs you've got. Setting

all the EQ knobs to maximum, including MID FREQ, produces the uniquely

punchy “chainsaw” sound that has powered countless heavy bands.

Note: the original circuit that produced this sound used components

with wide tolerances, resulting in noticeable tone differences from unit

to unit. The Hell Melter can recreate many of these different tones with

slight tweaks near the maximum position of the MID FREQ knob.

POWER SUPPY REQUIREMENTS:

Voltage: 9VDC Current: 140mA Polarity: Center-Negative

This device comes equipped with an Electro-Harmonix 9.6DC-200 power supply. Use of the wrong adapt-

er or a plug with the wrong polarity may damage the device and void the warranty. Do not exceed 12VDC

on the power plug. Power supplies rated for less than 140mA can cause the device to act unreliably

Advanced Heavy Metal Distortion

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Ikke kategoriseret
Model:	Hell Melter

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Hell Melter stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Electro Harmonix Manualer

Electro Harmonix J Mascis Ram's Head Manual

8 Oktober 2025

Electro Harmonix Anniversary Big Muff Pi Manual

6 Oktober 2025

Electro Harmonix Grand Canyon Manual

6 Oktober 2025

Electro Harmonix Doctor Q Manual

6 Oktober 2025

Electro Harmonix Stereo Memory Man with Hazarai Manual

6 Oktober 2025

Electro Harmonix Next Step Volume Pedal Manual

5 Oktober 2025

Electro Harmonix 8-Step Program Manual

28 September 2025

Electro Harmonix Lizard King Manual

7 September 2025

Electro Harmonix Holy Grail Neo Manual

5 August 2025

Electro Harmonix Pico Rerun Manual

5 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Microchip PIC18F2620 Manual

25 Oktober 2025

Microchip RN240 Manual

24 Oktober 2025

Jane BLW Manual

24 Oktober 2025

Kanto PS200 Manual

24 Oktober 2025

Microchip PIC24HJ12GP201 Manual

24 Oktober 2025

Microchip TC4420 Manual

24 Oktober 2025

Calor Pure Force 3en1 DT8765 Manual

24 Oktober 2025

Hikvision DS-QAE1A40G1-VB Manual

23 Oktober 2025

Microchip HV2818 Manual

23 Oktober 2025

Microchip MIC2298 Manual

23 Oktober 2025