Electro Harmonix Holy Stain Manual

Electro Harmonix Ikke kategoriseret Holy Stain

Læs gratis den danske manual til Electro Harmonix Holy Stain (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Electro Harmonix Holy Stain, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

HOLY STAIN

EH Multi Effect Pedal

Distortion/Reverb/Pitch Shift/Tremolo

Congratulations on your purchase of the Holy Stain: the first multi-effect pedal from Electro-

Harmonix. The Holy Stain is comprised of two stages: an analog distortion and a DSP. Two

types of distortion are available: Fuzz and Drive. There are four DSP functions: Room Reverb,

Hall Reverb, Pitch Shift and Tremolo. can choose from one distortion mode and one DSP One

mode at a time or bypass either stage. Please read further to learn how to fully operate your

Holy Stain.

- EFFECT DESCRIPTIONS -

DISTORTION

The Distortion section of the Holy Stain is made up of 4 controls: DIRT, COLOR, TONE and

VOLUME. DIRT and COLOR are both rotary switches while TONE and VOLUME are rotary

potentiometers.

The control allows you to change the type of distortion from Clean to Fuzz to Drive. The DIRT

Drive setting gives you a smooth distortion. The Fuzz setting is a harder edged distortion

compared to the Drive setting. Use the setting to bypass the distortion. Clean Please note:

the Clean setting is part of the distortion circuit so you may still hear a little grit when set to

Clean.

The Holy Stain has two controls to help tailor your distortion’s tone: COLOR and TONE. The

COLOR switch subtly changes the character of the distortion using three settings: Bright, Dark

and Warm. Use the Bright setting for a full frequency distortion. Choose the Dark setting to cut

high frequencies for a smoother distortion. The Warm setting is somewhere in between the

other two giving a rounder distortion. Please note: when DIRT is set to Clean, the COLOR

switch has no effect on the tone except that in Warm mode your sound may be slightly

distorted, depending on the volume of your pickups. The knob is a drastic tone control TONE

that, when set to extremes, will allow you to emphasize the highs or lows. Set TONE to the

middle for a nice, even, full frequency sound.

The control sets the overall output volume from the distortion stage. The output of VOLUME

the distortion stage is sent directly into the input of the DSP.

ROOM and HALL REVERB

The two reverb settings are excellent sounding, easy-to-use reverbs. The primary difference

between the Room and Hall reverbs is the pre-delay time. The Hall setting has a longer pre-

delay as compared to the Room. Pre-delay is the delay time between playing a note and hearing

the onset of the reverb effect.

All four DSP functions allow you to change their sound using the AMOUNT knob. The AMOUNT

knob’s function changes with each setting. For the two reverbs: the AMOUNT knob sets the

reverb time or length of reverb tail. As you turn the AMOUNT knob clockwise the reverb time

will increase.

The knob sets the balance between the output of the distortion circuit and the output of MIX

the DSP. When the MIX knob is set to fully counter-clockwise you will hear only distortion, no

DSP. When the MIX knob is set fully clockwise you will hear the direct output of the DSP which

may include the distortion that is present at the DSP’s input.

Press the Footswitch to cycle through the 4 DSP modes. MODE

PITCH SHIFT

In Pitch Shift mode, the Holy Stain will change the pitch of the note you play up to a 3rd and

down to a 4th. This means that when the AMOUNT knob is set to the full clockwise position, if

you play a C note on the guitar, the Holy Stain will shift that note up to an E. If the AMOUNT

knob is set to full counter-clockwise, the Holy Stain will shift the C note down to a G.

In Pitch Shift mode, the AMOUNT knob sets the pitch shift amount. When AMOUNT is set to 12

o’clock, you will hear practically no pitch shift. As you turn the knob in the clockwise direction,

your notes will shift up. As you turn AMOUNT counter-clockwise your notes shift down. The

AMOUNT knob, in Pitch Shift mode, is continuously variable from a 4th to + a 3rd. It does no–t

change the pitch in discrete steps. Set the AMOUNT knob to somewhere around 12 o’clock to

double or thicken your sound without changing the pitch.

The MIX knob controls the volume of your original note versus the volume of the pitch shifted

note. To hear an equal balance between original and pitch shifted notes, turn the MIX knob to

12 o’clock. To hear only the pitch shifted notes, turn MIX to its fully clockwise position.

TREMOLO

The Tremolo effect in the Holy Stain is a simple tremolo effect with some reverb thrown in. As

you turn the AMOUNT knob clockwise, the rate of the tremolo effect will quicken and the

amount of reverb will increase.

The MIX knob controls the depth of the Tremolo effect. As you turn the MIX knob clockwise you

will hear more Tremolo. Turn the MIX knob to its maximum setting for maximum Tremolo.

- CONTROLS -

DIRT Switch Switches between CLEAN, FUZZ and DRIVE. Use this switch to change the type –

of distortion. Set it to CLEAN to bypass the distortion.

COLOR Switch – Switches between BRIGHT, DARK and WARM. Use this switch to make

subtle changes to the character of your distortion. Please note: when DIRT is set to CLEAN, the

WARM setting of the COLOR switch may produce some distortion.

TONE Knob – Use this control to drastically change the sound of your distortion. As you turn

the TONE knob counter-clockwise from its middle position, the bass response will increase and

treble will decrease. As you turn the TONE knob clockwise from the middle, the treble response

will increase and bass will decrease. Turn TONE to the middle position to obtain an even

frequency response.

VOLUME Knob – Sets the output level of the distortion stage. As you turn the VOLUME knob

clockwise, the volume will increase.

AMOUNT Knob – Controls the DSP parameters. The function of this knob changes for each

DSP setting:

DSP Function AMOUNT Parameter

Room Reverb Reverb Time

Hall Reverb Reverb Time

Pitch Shift Pitch Shift Amount: - 4th to + 3rd

Tremolo Tremolo Rate

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Ikke kategoriseret
Model:	Holy Stain

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Holy Stain stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Electro Harmonix Manualer

Electro Harmonix Good Vibes Manual

1 Januar 2025

Electro Harmonix OD Glove Manual

29 December 2024

Electro Harmonix Soul POG Manual

29 December 2024

Electro Harmonix Memory Boy Manual

29 December 2024

Electro Harmonix Super Switcher Manual

4 December 2024

Electro Harmonix Crayon 69 Manual

18 November 2024

Electro Harmonix POG III Manual

11 Oktober 2024

Electro Harmonix Cock Fight Manual

4 September 2024

Electro Harmonix Cock Fight Plus Manual

4 September 2024

Electro Harmonix The Worm Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 304090 Manual

16 Juni 2025

Toorx SRX-85 Manual

16 Juni 2025

Cable Matters 180070 Manual

16 Juni 2025

Philips Avent SCD252 Manual

16 Juni 2025

Philips Q-Line 55BDL2050Q Manual

16 Juni 2025

EFX Delta DUDB4 Manual

16 Juni 2025

Foster Prep Station PS1000HR Manual

16 Juni 2025

OmniMount OBT60 Manual

16 Juni 2025

XO D34HPBF Manual

16 Juni 2025

Janitza 800-DI14 Manual

16 Juni 2025