Electro Harmonix Hot Wax Manual

Electro Harmonix Ikke kategoriseret Hot Wax

Læs gratis den danske manual til Electro Harmonix Hot Wax (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Hot Wax, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

HOT WAX

Dual Overdrive

Congratulations on your purchase of the Electro-Harmonix Hot Wax The Hot .

Wax is a unique dual overdrive pedal that combines the distortion sections

used by two EHX classics: the and the Each section can Crayon Hot Tubes.

be engaged independently, for two very different overdrive flavors, or

together to create a massive overdriven sound. The Hot Wax is a flexible and

great-sounding distortion unit useful for guitar, bass, keyboards, and many

other musical instruments.

The Hot Wax includes a two-knob EQ ( and for extensive BASS TREBLE)

tonal control, and control to mix between your dry and distorted a BLEND

sound. These three controls are active with either or both distortion sections

engaged, and bypassed when both overdrive section are turned off The Hot .

Wax features buffered bypass and is powered a standard 9V power jack. by

WARNING: Your Hot Wax comes equipped with an Electro-Harmonix 9.6DC-200BI power

supply (same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The Hot Wax requires 75mA

at 9VDC with a center negative plug. Use of the wrong adapter or a plug with the wrong

polarity may damage your Hot Wax and void the warranty.

- USING THE HOT WAX-

Plug the included power adapter into the 9V jack. The pedal must be

powered to pass a signal through regardless of whether or not distortion is ,

engaged. Step on the footswitch to engage the Crayon sectionCRAYON .

The green D lights to indicate that the Crayon is on. Click the LE HOT TUBES

footswitch to turn on the Hot Tubes section, as indicated by the red LED.

The EQ and controls are active when either one or BASS & TREBLE BLEND

both sections are in use. When only one section is active, adjust that

section’s VOL (volu ) knob to set the master volume. When both sections me

are active:

 The Crayon comes first in the signal path .

 T VOL knob sets the level driving the Hot Tubes section. he Crayon’s

 The EQ affects the signal

after

. the Hot Tubes’ distortion section

 The BLEND knob combines the clean signal with the post-EQ signal.

 T VOL knob functions as the master volume. he Hot Tubes’

- CONTROLS and I/O JACKS -

Footswitches and LEDs

The right LED (green) illuminates when the Crayon section is engaged via

the footswitch. The left (red) LED lights when using the Hot Tubes section.

VOL Knob (Crayon)

If only the Crayon is active, the knob sets master output level. If both VOL

sections are active, the VOL knob sets the level between the Crayon’s drive

section and the Hot Tubes’ drive section.

VOL Knob (Hot Tubes)

Use the Hot Tubes knob to set the master output level. VOL

DRIVE Knobs

Turn the appropriate knob to set the distortion intensity. DRIVE

BASS and TREBLE Equalization Knobs

Adjust the knob to boost or cut low frequencies. Adjust the BASS TREBLE

knob to boost or cut high frequencies. The frequency response for either

knob is flat (no boost or cut) when the knob is set halfway up.

BLEND Knob

The knob mixes the dry and distorted signal. With BLEND set to BLEND

minimum (fully counterclockwise), you will only hear the dry signal. When

BLEND is turned fully clockwise, you will only hear the distort signal. All ed

other settings will yield varying mixtures of dry and distorted sounds.

Turning BLEND down to add dry signal can add more punch and clarity,

along with more emphasis on pick attack This functionality may be of .

particular importan to bassists, as full-on distortion can reduce punch and ce

muddy up low end frequencies.

INPUT Jack

Plug your instrument or the output of another effects pedal into the ¼”

INPUT jack. The input impedance is 2.2M . 

OUTPUT Jack

Use the jack to send the signal to an amp or another effects ¼” OUTPUT

pedal. The signal will be dry or effected based on the bypass status. The

output impedance is 220 . 

- POWER -

Plug the output of the included EHX 9.6DC-200 adapter into the 9V power

jack of the Hot Wax. The Hot Wax draws at 9VDC with a 75mA center

negative plug. The Hot Wax accepts Boss® and Ibanez® style AC Adapters

capable of delivering at least 200 mA.

The Hot Wax does not accept batteries, and only works with external 9V an

power supply. Do not open the unit as there are no user serviceable parts.

- NOTES AND SPECIFICATIONS –

 The Hot Wax utilizes a high quality buffered bypass.

  Input Impedance: 2.2M

  Nominal Output Impedance: 220

 Current Draw: 75mA

- WARRANTY INFORMATION -

Please register your pedal online at http://www.ehx.com/product-registration

or complete and return the enclosed warranty card within 10 days of purchase.

Electro-Harmonix will repair or replace, at its discretion, a product that fails to

operate due to defects in materials or workmanship for a period of one year

from date of purchase. This applies only to original purchasers who have

bought their product from an authorized Electro-Harmonix retailer. Repaired

or replaced units will then be warranted for the unexpired portion of the

original warranty term.

If you should need to return your unit for service within the warranty period,

please contact the appropriate office listed below. Customers outside the

regions listed below, please contact EHX Customer Service for information on

warranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian

customers: please obtain a Return Authorization Number (RA#) from EHX

Customer Service before returning your product. Include  with your returned

unit  a written description of the problem as well as your name, address,

telephone number, e-mail address, RA# and a copy of your receipt clearly

showing the purchase date.

United States & Canada Europe

EHX CUSTOMER SERVICE JOHN WILLIAMS

ELECTRO-HARMONIX ELECTRO-HARMONIX UK

c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE

55-01 2ND STREET SWANSEA SA2 0RQ

LONG ISLAND CITY, NY 11101 UNITED KINGDOM

Tel: 718-937-8300 Tel: +44 179 247 3258

Email: info@ehx.com Email: electroharmonixuk@virginmedia.com

- FCC COMPLIANCE -

This device complies with part 15 of the FCC Rules Operation is subject to the .

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation. If the device is not installed

and used in accordance with the instructions, it may cause harmful

interference to radio communications and void the user's authority to

guarantee the equipment.

Note:

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help .

Modifications not expressly approved by the manufacturer could void the

user's authority to operate the equipment under FCC rules.

To hear demos on all EHX pedals visit us on the web at www.ehx.com

Email us at info@ehx.com

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Ikke kategoriseret
Model:	Hot Wax

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Hot Wax stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Electro Harmonix Manualer

Electro Harmonix Holy Grail Neo Manual

5 August 2025

Electro Harmonix Pico Rerun Manual

5 August 2025

Electro Harmonix Oceans 11 Reverb Manual

5 August 2025

Electro Harmonix Envelope Filter Manual

5 August 2025

Electro Harmonix 9DC-100 Manual

30 Juli 2025

Electro Harmonix C9 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Electro Harmonix Nano Deluxe Memory Man Manual

30 Juli 2025

Electro Harmonix 40DC-100 Manual

30 Juli 2025

Electro Harmonix Big Muff Pi w. Tone Wicker Manual

30 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025

OnTruss EventBoard C90I BASIC Manual

20 August 2025

Tefal Quickchef HB672B Manual

20 August 2025

Gravity XW GLOVE Manual

20 August 2025

Roland V-4CF Manual

20 August 2025

Tefal Uno M FF133D Manual

20 August 2025

LD Systems MAUI 5 GO 100 BC W Manual

20 August 2025

Moulinex Bake Partner QA523B Manual

19 August 2025

Uniprodo UNICLEAN 142B Manual

19 August 2025

Tefal Body Partner LL9503 Manual

19 August 2025