Electro Harmonix Mainframe Bit Crusher Manual

Electro Harmonix Ikke kategoriseret Mainframe Bit Crusher

Læs gratis den danske manual til Electro Harmonix Mainframe Bit Crusher (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Mainframe Bit Crusher, eller vil du spørge andre brugere om produktet?

Side 1/12
1
Congratulations on your purchase of the MAINFRAME, a powerful but easy- -use to
sample rate reducer and bit crusher. Introducing old-school digital audio sounds
into your music has never been easier. A broad range of controls help you fine-
tune the digital artifacts, and the innovative Sample Rate Tuning Mode makes it
easy to match the sample reduction to a pitch, even on the fly. Access the
MAINFRAME and immerse your tone in the sounds of the arcades, consoles, and
terminals of yesteryear.
WARNING: Your Mainframe comes equipped with an Electro-Harmonix 9.6DC-200BI
power supply. The Mainframe requires at 9VDC with a center negative plug. Use 90mA
of the wrong adapter or a plug with the wrong polarity may damage your Mainframe and
void the warranty. Do not exceed 10 VDC on the power plug. Power supplies rated for .5
less than will cause the Mainframe to act unreliably. 90mA
- FEATURES -
Sample Rate Reduction ranging from 48kHz to 110Hz
Bit Depth Reduction ranging from -bit to 1-bit 24
Selectable High/Low/Band-Pass filter to shape the artifacts of the bit crushing
and sample rate reduction
Sample Rate Tuning Mode allows you to set the sample rate to match the key
of a song, or continu ly adjust the sample rate based on what you play on al
your instrument
Programmable preset or expression pedal setting allows you to save your
sound or control any combination of the Mainframe’s knobs with an external
expression pedal
Secondary knob parameters allow you to fine- tune the Mainframe’s effect
High quality buffered bypass and silent switching
- SPECIFICATIONS -
  Audio input impedance: 2M
  Audio o put impedance the OUTPUT jackut : 500
Current draw: mA 90
Maximum input signal level: 6.25 dBu (4.5V peak- -peak) to
2
C C ONTROLS AND ONNECTIONS
1. VOL Knob This knob sets the master output level of the Mainframe.
2. BLEND Knob This knob blends between the dry guitar signal and the
effect signal. As the knob is turned clockwise, the output ranges from
completely dry guitar to a fully effected signal with the filter applied.
3. BIT DEPTH Knob As this knob is turned clockwise, the bit depth of
the signal is
reduced
, producing a distorted, noisy tone.
4. SAMPLE RATE Knob As this knob is turned clockwise, the sample
rate of the signal is
reduced
, producing a ringing or glitchy tone.
5. FILTER HPF/BPF/LPF Switch This toggle switch controls the
direction of the Mainframe’s filter:
HPF: High-Pass Filter
BPF: Band-Pass Filter
LPF: Low-Pass Filter


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: Mainframe Bit Crusher

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Mainframe Bit Crusher stil et spørgsmål nedenfor, og andre brugere vil svare dig