Electro Harmonix Oceans 3-Verb Manual


Læs gratis den danske manual til Electro Harmonix Oceans 3-Verb (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Oceans 3-Verb, eller vil du spørge andre brugere om produktet?

Side 1/4
OCEANS
3-VERB
User Manual
Multi-Function Reverb
Welcome to the Electro-Harmonix Oceans 3-Verb:
an extremely compact reverb pedal with three high
quality algorithms taken from its big brother, the
Oceans 11. Oceans 3-Verb contains classic EHX Hall
and Plate plus the Oceans 11’s Spring algorithm
which faithfully emulates the iconic drip of vintage
Fender® reverb units.
Operating Instructions
Insert the output plug from the supplied 9VDC AC
adapter into the power jack at the top of the Oceans
3-Verb. The unit must be powered to pass signal,
even in bypass. The Oceans 3-Verb allows you to
choose your bypass topology: buffered analog
bypass or tails digital bypass. Connect an instrument
cable from your instrument to the Input jack. Con-
nect an instrument cable between the Output jack
and a suitable amplifier. Click the footswitch to
engage the Oceans 3-Verb and light the LED.
8
9
1 2
5
6
6
3 4
7
Power Suppy Requirements: Voltage: 9VDC Current: 100mA Polarity: Center-Negative
This device comes equipped with an Electro-Harmonix 9.6DC-200 power supply. Use of the wrong adapter or a
plug with the wrong polarity may damage the device and void the warranty. Do not exceed 10.5VDC on the power
plug. Power supplies rated for less than 100mA may cause the device to act unreliably.


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: Oceans 3-Verb

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Oceans 3-Verb stil et spørgsmål nedenfor, og andre brugere vil svare dig