Electro Harmonix Rerun Manual


Læs gratis den danske manual til Electro Harmonix Rerun (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Rerun, eller vil du spørge andre brugere om produktet?

Side 1/4
RERUN
User Manual
Tape Delay
Welcome to the Electro-Harmonix Rerun Tape Delay:
an extremely compact tape delay modeler with up
to 3 seconds of delay time. The Rerun lets you dial
in repeats with saturation and flutter for lush, organic
delay tones. The pedal features tap-tempo, to keep
the echoes in time with your music, tails mode, to
keep the repeats going after switching to bypass,
and foot accessible maximum feedback for run-
away self-oscillation.
Operating Instructions
Insert the output plug from the supplied 9VDC AC
adapter into the power jack at the top of the Rerun.
The unit must be powered to pass signal, even in
bypass. The Rerun features buffered analog bypass
or digital bypass depending on settings. Connect
an instrument cable from your instrument to the
Input jack. Connect an instrument cable between
the Output jack and a suitable amplifier. Click the
footswitch to engage the pedal and light the LED.
BLEND DELAY
FLUTTER
SAT FDBK
8
9
1 2
5
6
6
3 4
7
Power Suppy Requirements: Voltage: 9VDC Current: 100mA Polarity: Center-Negative
This device comes equipped with an Electro-Harmonix 9.6DC-200 power supply. Use of the wrong adapter or a
plug with the wrong polarity may damage the device and void the warranty. Do not exceed 10.5VDC on the power
plug. Power supplies rated for less than 100mA may cause the device to act unreliably.


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: Rerun

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Rerun stil et spørgsmål nedenfor, og andre brugere vil svare dig