Electro Harmonix Steel Leather Manual

Electro Harmonix Ikke kategoriseret Steel Leather

Læs gratis den danske manual til Electro Harmonix Steel Leather (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Steel Leather, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

STEEL LEATHER

Bass Expander

Congratulations on your purchase of the Steel Leather! The Steel Leather is a result of Electro-

Harmonix’s commitment to present a useful and dynamic effect that is specifically designed

for the bass. It presents you with a powerful attack control that gives your bass a cutting edge

both on stage and in the studio. Reading these instructions carefully will ensure that you will

get the most out of the Steel Leather.

- THEORY OF OPERATION -

The Steel Leather is an effect pedal designed to enhance your picking and plucking

on the bass guitar. The enhanced notes will allow the bass to cut through more easily

and give your notes a sharp attack. Using the two knobs you can adjust the Steel

Leather’s effect from subtle to a total emphasis of the attack portion of your playing.

You have separate control over both the response and the volume of the effect.

The Steel Leather is an expander that operates over a narrow frequency range. The

frequency range was chosen specifically to

expand the attack portion of a bass guitar’s notes. An expander is a device that

makes loud signals louder and quiet signals quieter. An expander is the opposite of a

compressor, making your playing more dynamic. The louder your notes the more the

Steel Leather will expand or emphasize your attack. On quiet notes, it may not

emphasize the attack at all. What this means is that the musician can use the Steel

Leather to sharpen the attack on their notes just by simply playing louder. Of course

you can also set up the Steel Leather so that it emphasizes every note you play, no

matter how quiet the note.

As you start to use the Steel Leather, invest some time to experiment with the

controls and how they interact. You will discover very interesting possibilities

including many different attack emphasis points that apply to various music styles.

Once you understand the possibilities you will find out that small changes can make a

huge difference.

- CONTROLS -

Effect Level Knob

– controls the volume of the Steel Leather effect. When turned

down to 0, completely counter clockwise, no effect will be heard just the original dry

signal. As you turn the Effect Level knob up, or clockwise, the volume of the effect

will increase, while the level of the dry signal remains constant. The farther you turn

the Effect Level knob up, the more effect you will hear, making your attack more

dramatic. The Effect Level knob is completely independent of the Response knob

though the two work hand in hand to create the overall effect.

Response Knob controls the response or sensitivity of the effect to your picking. –

When the Response knob is set to a low setting, below 12 o’clock, only the loudest

notes you play will be emphasized. Turn the Response knob above 12 o’clock and

soon every note you play, no matter how lightly you play them, will be emphasized.

Use the Response knob to set how the Steel Leather responds to your dynamics and

picking. As you turn the Response knob up, or clockwise, you will notice your quiet

notes begin to trigger the Steel Leather effect. As you turn the Response knob down,

or counter-clockwise, you will need to play louder to emphasize your notes. For

example, you can set up the Steel Leather to only respond to your loudest notes so

that it can be used to emphasize a certain passage in a song.

You may also find that the Steel Leather responds differently when you switch from

plucking the notes with your fingers to plucking the notes with a pick. Usually a finger

plucked note will have a softer attack as compared to a picked note, so in general the

Response knob needs to be turned up higher when playing with your fingers.

Status LED and Footswitch- When the LED is lit; the Steel Leather is in effect

mode. When the LED is off, the Steel Leather is in True Bypass mode and power is

completely disengaged. So when the Steel Leather is in Bypass, it is off and does not

draw power from the battery. The Footswitch toggles between effect mode and

off/bypass mode. Removing the input plug will also turn the Steel Leather off.

INPUT Jack – Leather. The input This ¼” jack is the audio input to the Steel

impedance presented at this jack is 1M. A ¼” plug must be connected to the INPUT

to turn the Steel Leather on.

AMP Jack – This ¼” jack is the audio output from the Steel Leather. When the

Steel Leather is in Bypass mode, the OUTPUT jack is connected directly to the INPUT

jack.

9V Power Jack – The Steel Leather can run off of a 9V battery or you can connect a

9VDC battery eliminator capable of delivering at least 100mA to the 9V power jack.

The battery eliminator must have a barrel connector with center negative. The

battery may be left in or taken out when using an eliminator.

- POWER -

IMPORTANT PLEASE READ: The Steel Leather will not work with the same

power adaptor that is daisy chained to other pedals in its signal chain.

Please run the Steel Leather off of its own power adapter or a battery. The

battery will last a long time.

Power from the internal 9-volt battery is activated by plugging into the INPUT jack

and engaging the effect with the Footswitch. To disconnect power either press the

Footswitch so the LED is off and/or remove the input cable. Whether you use a

battery or an external AC Adapter, the Steel Leather powers up only when a plug is

inserted into the INPUT jack and the LED is on.

To change the 9-volt battery, you must remove the 4 screws on the bottom of the

Steel Leather. Once the screws are removed, you can take off the bottom plate and

change the battery. Please do not touch the circuit board while the bottom plate is off

or you risk damaging a component.

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Ikke kategoriseret
Model:	Steel Leather

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Steel Leather stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Electro Harmonix Manualer

Electro Harmonix Holy Grail Neo Manual

5 August 2025

Electro Harmonix Pico Rerun Manual

5 August 2025

Electro Harmonix Oceans 11 Reverb Manual

5 August 2025

Electro Harmonix Envelope Filter Manual

5 August 2025

Electro Harmonix 9DC-100 Manual

30 Juli 2025

Electro Harmonix C9 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Electro Harmonix Nano Deluxe Memory Man Manual

30 Juli 2025

Electro Harmonix 40DC-100 Manual

30 Juli 2025

Electro Harmonix Big Muff Pi w. Tone Wicker Manual

30 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025

OnTruss EventBoard C90I BASIC Manual

20 August 2025

Tefal Quickchef HB672B Manual

20 August 2025

Gravity XW GLOVE Manual

20 August 2025

Roland V-4CF Manual

20 August 2025

Tefal Uno M FF133D Manual

20 August 2025

LD Systems MAUI 5 GO 100 BC W Manual

20 August 2025

Moulinex Bake Partner QA523B Manual

19 August 2025

Uniprodo UNICLEAN 142B Manual

19 August 2025

Tefal Body Partner LL9503 Manual

19 August 2025