Electro Harmonix Stereo Electric Mistress Manual

Electro Harmonix Ikke kategoriseret Stereo Electric Mistress

Læs gratis den danske manual til Electro Harmonix Stereo Electric Mistress (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Stereo Electric Mistress, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

STEREO ELECTRIC MISTRESS

Digital Flanger horus /C

Plug your guitar into the INPUT jack and run a cable from the Main Output to your

amplifier. If you want to produce lush Stereo flanges run a second cable from the

Stereo Output to a second amplifier. There are three basic controls on the STEREO

ELECTRIC MISTRESS.

Rate Knob: This knob controls the speed or rate of the LFO signal that modulates

the flanger. It also controls the rate of the Chorus effect. As you turn the Rate knob

up the rate will increase. When the Rate knob is turned down between fully counter-

clockwise and the 10 o’clock position, the Stereo Electric Mistress will enter Filter

Matrix mode. In Filter Matrix mode the LFO signal is disconnected from the Flanger

and Chorus so that you can manually modulate the Flanger/Chorus by turning the

Rate knob. Keep the Rate knob below 10 o’clock to keep it in Filter Matrix mode.

1. Flanger Depth Knob: Controls the amount of Flange that is mixed with the

direct signal. The more you turn the knob clockwise, the more pronounced the

flanger effect.

2. Chorus Depth Knob: Controls the amount of the sweet chorus sound. The

more you turn the knob clockwise, the more pronounced the chorus effect.

Hint: The Flanger and Chorus effect can be used together. While both produce rich

sweeping textures on their own, together they can produce dramatically different and

warm sonic textures that are not available when one effect is used alone.

STATUS LED This LED indicates the current state of the unit. When the LED is lit –

up, the box is in EFFECT mode. When the LED is off, the box is in BYPASS mode.

Pressing the Footswitch will toggle

INPUT Jack – This ¼” jack is the audio input to the Stereo Electric Mistress. The

input impedance presented at the Input Jack is 2 M . 

MAIN OUT Jack - This ¼” jack is the main effect output jack. Use this jack when

connected the Stereo Electric Mistress in mono. The output impedance at this jack is

820 .

STEREO OUT Jack ck – This ¼” jack is the stereo effect output jack. Connect this ja

to your second amp or second mixer channel when connecting the Stereo Electric

Mistress in stereo. The output impedance at this jack is 820 . 

9V Power Jack Connect the output plug from the AC Adapter that was supplied –

with your Stereo Electric Mistress to this jack, located at the top of the unit. The

Stereo Electric Mistress accepts Boss style AC Adapters.

FLANGER Effect:

The flanging effect can be thought of as a pitch slowly sweeping between high and

low limits superimposed on the guitar signal. The RATE control allows you to change

the speed at which the sweep occurs. With the RATE control fully counter-clockwise,

you enter the Filter Matrix mode, which extends to the 10’o’clock position of the

knob. Turning the dial clockwise increases the rate to the point where the frequency

of the input signal appears to be shifted in a vibrato-like fashion. The Chorus effect

follows the same principal but produces a lush chorus where the rate control is

applied to the Chorus and Flanger share identically.

FILTER MATRIX Mode:

The STEREO ELECTRIC MISTRESS has been set at the factory for maximum color

capacity in the FLANGER mode. One of the unique settings that was inherited from

the legendary DELUXE ELECTRIC MISTRESS is the Filter Matrix mode. The harmonic

makeup of the flange remains while no frequency modulation is applied. Different

tonalities can be obtained when the RATE knob is set between a totally off position to

around 10 o’clock position.

Unplug after use. Avoid operating near moisture. Rock-n-Roll!

- WARRANTY INFORMATION -

Please complete and return the enclosed warranty card within 10 days of purchase.

Electro-Harmonix will repair or replace, at its discretion, a product that fails to

operate due to defects in materials or workmanship for a period of one year from

date of purchase. This applies only to original purchasers who have bought their

product from an authorized Electro-Harmonix retailer. Repaired or replaced units will

then be warranted for the unexpired portion of the original warranty term. If you

should need to return your unit for service within the warranty period, please include

a brief description of the problem as well as your name, address, telephone number,

copy of your receipt, and a check or money order for shipping and handling:

United States - $12

Canada - $15

Europe and other countries - $25

Ship to:

Electro-Harmonix

C/O New Sensor Corporation

55-01 2nd . St

Long Island City, NY 11101

Attn: Service Department

Please make checks/money orders payable to New Sensor Corporation.

To hear demos on all EH pedals visit us on the web at . www.ehx.com

Email us at info@ehx.com

- FCC COMPLIANCE -

Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.



Consult the dealer or an experienced radio/TV technician for help .

Modifications not expressly approved by the manufacturer could void the user's authority to

operated the equipment under FCC rules.

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Ikke kategoriseret
Model:	Stereo Electric Mistress

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Stereo Electric Mistress stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Electro Harmonix Manualer

Electro Harmonix Holy Grail Neo Manual

5 August 2025

Electro Harmonix Pico Rerun Manual

5 August 2025

Electro Harmonix Oceans 11 Reverb Manual

5 August 2025

Electro Harmonix Envelope Filter Manual

5 August 2025

Electro Harmonix 9DC-100 Manual

30 Juli 2025

Electro Harmonix C9 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Electro Harmonix Nano Deluxe Memory Man Manual

30 Juli 2025

Electro Harmonix 40DC-100 Manual

30 Juli 2025

Electro Harmonix Big Muff Pi w. Tone Wicker Manual

30 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025

OnTruss EventBoard C90I BASIC Manual

20 August 2025

Tefal Quickchef HB672B Manual

20 August 2025

Gravity XW GLOVE Manual

20 August 2025

Roland V-4CF Manual

20 August 2025

Tefal Uno M FF133D Manual

20 August 2025

LD Systems MAUI 5 GO 100 BC W Manual

20 August 2025

Moulinex Bake Partner QA523B Manual

19 August 2025

Uniprodo UNICLEAN 142B Manual

19 August 2025

Tefal Body Partner LL9503 Manual

19 August 2025