Electro Harmonix Super Pulsar Manual


Læs gratis den danske manual til Electro Harmonix Super Pulsar (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Electro Harmonix Super Pulsar, eller vil du spørge andre brugere om produktet?

Side 1/16
1
SUPER PULSAR
Stereo Tap Tremolo/Panner
Congratulations on your purchase of the Electro-Harmonix SUPER
PULSAR, one of the most advanced Tremolo/Panner effects ever put into
a guitar pedal. Super Pulsar pairs a high end, low noise, stereo, analog
signal path with full digital control bringing out the best of both worlds.
Super Pulsar boasts so many features we thought it best to list them:
Special Features of SUPER PULSAR:
Stereo or Mono input and output for any combination of stereo/mono tremolo or
panning
Fully analog signal path with up to 12dB Volume Boost
Four adjustable modulation waveforms: Sine, Triangle, Pulse and R hythm
Sine continuously varies from narrow positive peak to standard sine to wide
positive peak
Triangle continuously varies from ramp up to symmetrical triangle to ramp down
Pulse continuously varies its ON time from 4% to 100% of modulation rate
9 Rhythm patterns available, up to 16 steps each, all user programmable
Phase control continuously varies the right channel’s phase of modulation in
relation to the left from 0° to 360°
Wave Invert button quickly inverts modulation waveform
Output Volume knob allows for adjustable output effect volume
Wide modulation rate control: from 16 seconds to 230Hz
Tap Footswitch allows you to set modulation rate or R tempo with 2 or hythm
more taps of your foot
Tap Divide function divides down your tap tempo for faster modulation from the
same tap tempo; divides are dotted eighth note, quarter note triplet, eighth
note, eighth note triplet, 16th and 32nd notes
Expression pedal or CV control over Rate, Depth, Shape, Phase or Volume
External, generic footswitch input for Tap Tempo plus up to 2 other functions on
TAP/CLK IN jack or set it for external clock in
Save and recall all knobs, settings, rhythms and tap tempo up to esets in 8pr
True Bypass using mechanical relays
Includes EHX9.6DC power supply
WARNING:
Your SUPER PULSAR comes equipped with an Electro-Harmonix 9.6DC-
200 power supply (same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The
SUPER PULSAR requires 165mA at 9VDC with a center negative plug and does not
accept batteries. Using the wrong adapter may damage your unit and void the
warranty. Please do not exceed 10VDC on the power plug.
2
SUPER PULSAR QUICK START
CONNECTING YOUR SUPER PULSAR
MONO Guitar / Instrument Setup
Use standard, mono ¼” instrument cables for all Super Pulsar audio
connections.
Plug your guitar, or the output of the previous effects pedal, into the
MONO / L input jack.
Connect the MONO / L output the Super Pulsar into your amplifier or into on
the input of another pedal.
MONO Input / STEREO Output Setup
Start with the MONO Guitar setup above .
Grab a third instrument cable and plug it into Right output. Super Pulsar’s
Connect the third cable to a second amplifier the stereo input of a stereo-or
in guitar pedal, such as the EHX Cathedral, or use it to split your signal to in
another pedal chain.
STEREO Input / STEREO Output Setup
Building upon the MONO in/STEREO out setup above, add a fourth
instrument cable and plug it into the Right input on Super Pulsar.
Plug the fourth cable into a stereo source, such as a keyboard or the output
of a stereo guitar pedal, like the EHX Stereo Electric Mistress.
BASIC TREMOLO SETTINGS
Standard Sine Wave Tremolo:
VOLUME = 1 o’clock RT. PHASE = 0° WAVE =
SHAPE = 12 o’clock DEPTH = 11 o’clock RATE = 11 o’clock
ENV DEPTH = 12 o’clock ENV RATE = 12 o’clock xRATE = DIM
Chopped Tremolo:
VOLUME = 1 o’clock RT. PHASE = 0° WAVE =
SHAPE = 11 DEPTH = 10 RATE = 12 o’clock o’clock o’clock
ENV DEPTH = 12 o’clock o’clock ENV RATE = 12 xRATE = DIM
ENVELOPE CONTROLS See page 3 for a full explanation on ENV controls.
Rate Slows As Notes Fade:
VOLUME = 1 o’clock RT. PHASE = 0 WAVE =
SHAPE = 12 o’clock DEPTH = 11 o’clock RATE = 9 o’clock
ENV DEPTH = 12 o’clock o’clock ENV RATE = 3
PRESET MODE See page 13 for a full explanation on Presets.
Entering Preset Mode/Loading Factory Presets:
Press and hold the MODE footswitch.
After 2 seconds, all the LEDs in the waveform display light up.
Release the MODE footswitch, you are now in Preset mode.
Press and release the MODE footswitch to load and advance the presets.
CREATING YOUR OWN RHYTHM PATTERNS See page 14.


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: Super Pulsar

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Super Pulsar stil et spørgsmål nedenfor, og andre brugere vil svare dig