Electro Harmonix Switchblade Manual

Electro Harmonix Ikke kategoriseret Switchblade

Læs gratis den danske manual til Electro Harmonix Switchblade (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Switchblade, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

SWITCHBLADE

Channel Selector

Congratulations! You have just purchased the Switchblade Channel Selector. The

Switchblade is capable of carrying out all of your simple switching needs, without

having to worry about batteries and power adaptors.

-OPERATION-

FOOTSWITCH

— Switches the Y jack connection between the A jack and B jack.

The Switchblade can be used in two directions, meaning the signal path can flow from A/B to

from Y to A/B.

Using the Switchblade to switch between two instruments: plug the instruments into jack A

and jack B using ¼” instrument cables. Then connect jack Y to the next device in your signal

chain (effects, if any, or amplifier if none). Use the footswitch to switch between the

instruments.

Using the Switchblade to switch between two amplifiers: plug the amplifiers into jack A and

jack B using ¼” instrument cables. Then connect jack Y to the previous device in your signal

chain (effects, if any, or instrument if none). Use the footswitch to switch between

amplifiers.

The Switchblade is not limited the above two applications. Here are two more application

examples:

Y: Instrument

→

Effects chain A, effects chain B

Y: Amplifier head

→

Speaker cabinet A, speaker cabinet B (be sure to use

speaker

cable and not instrument cable for this application).

The Switchblade is a passive device and requires no power supply, such as a battery or

power adapter. The Switchblade does not support stereo use and will only work with ¼”

mono cables.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or complete and return the enclosed

warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product

that fails to operate due to defects in materials or workmanship for a period of one year from date of

purchase. This applies only to original purchasers who have bought their product from an authorized Electro-

Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original

warranty term.

If you should need to return your unit for service within the warranty period, please contact the appropriate

office listed below. Customers outside the regions listed below, please contact EHX Customer Service for

information on warranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian customers: please

obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product.

Include with your returned unit: a written description of the problem as well as your name, address,

telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.

United States & Canada

EHX CUSTOMER SERVICE

ELECTRO-HARMONIX

c/o NEW SENSOR CORP.

47-50 33RD STREET

LONG ISLAND CITY, NY 11101

Tel: 718-937-8300

Email: info@ehx.com

Europe

JOHN WILLIAMS

ELECTRO-HARMONIX UK

13 CWMDONKIN TERRACE

SWANSEA SA2 0RQ

UNITED KINGDOM

Tel: +44 179 247 3258

Email: electroharmonixuk@virginmedia.com

This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending

upon the laws of the jurisdiction within which the product was purchased.

To hear demos on all EHX pedals visit us on the web at www.ehx.com

Email us at info@ehx.com

FCC COMPLIANCE

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void the user's authority to operate the

equipment under FCC rules.

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Ikke kategoriseret
Model:	Switchblade

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Switchblade stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Electro Harmonix Manualer

Electro Harmonix J Mascis Ram's Head Manual

8 Oktober 2025

Electro Harmonix Anniversary Big Muff Pi Manual

6 Oktober 2025

Electro Harmonix Grand Canyon Manual

6 Oktober 2025

Electro Harmonix Doctor Q Manual

6 Oktober 2025

Electro Harmonix Stereo Memory Man with Hazarai Manual

6 Oktober 2025

Electro Harmonix Next Step Volume Pedal Manual

5 Oktober 2025

Electro Harmonix 8-Step Program Manual

28 September 2025

Electro Harmonix Lizard King Manual

7 September 2025

Electro Harmonix Holy Grail Neo Manual

5 August 2025

Electro Harmonix Pico Rerun Manual

5 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Microchip PIC18F2620 Manual

25 Oktober 2025

Microchip RN240 Manual

24 Oktober 2025

Jane BLW Manual

24 Oktober 2025

Kanto PS200 Manual

24 Oktober 2025

Microchip PIC24HJ12GP201 Manual

24 Oktober 2025

Microchip TC4420 Manual

24 Oktober 2025

Calor Pure Force 3en1 DT8765 Manual

24 Oktober 2025

Hikvision DS-QAE1A40G1-VB Manual

23 Oktober 2025

Microchip HV2818 Manual

23 Oktober 2025

Microchip MIC2298 Manual

23 Oktober 2025