Electro Harmonix Tone Tattoo Manual

Electro Harmonix Ikke kategoriseret Tone Tattoo

Læs gratis den danske manual til Electro Harmonix Tone Tattoo (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Tone Tattoo, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

TONE TATTOO

ANALOG MULTI-EFFECT PEDAL featuring

METAL MUFF, NEO CLONE & MEMORY TOY

Congratulations on your purchase of the fully analog Electro-Harmonix

TONE TATTOO, the first true multi-effect from Electro-Harmonix! The

TONE TATTOO combines three of the most popular guitar effects:

distortion, chorus and delay, into one small and convenient package.

Each section in the TONE TATTOO is taken directly from some of EHX’s

best selling effects: Metal Muff for distortion, Neo Clone for analog

chorus and alog delay from the Memory Toy. an

The effects in the TONE TATTOO are completely independent from each

other. Three separate footswitches, one for each section, allow for

individual control over which effect on or off. Each effect has its own is

dedicated kn s and switch all of which are tweakable at any moment; ob es

there are no menus to scroll through or dual function knobs.

The chain of effects in the TONE TATTOO is fixed as the following:

IN METAL MUFF NEO CLONE MEMORY TOY OUT→ → → →

Using the TONE TATTOO is like having three separate eects pedals on

your pedalboard but without the need for the additional cables or separate

power supplies and all in the footprint of one medium sized pedal. The

TONE TATTOO’s 5.75” x 4.75”. footprint is

WARNING: Your Tone Tattoo comes equipped with an Electro-Harmonix

9.6DC-200BI power supply (same as used by Boss® & Ibanez®: 9.6 Volts

DC 200mA). The Tone Tattoo requires mA at 9VDC with a center 75

negative plug. The Tone Tattoo does not take batteries. Using the wrong

adapter may damage your unit and void the warranty.

- CONTRO , INDICATORS & I/O - LS

METAL MUFF SECTION

DRIVE Knob –Controls the amount of input gain. As the DRIVE knob

is turned clockwise, the input gain of the Metal Muff increases and the

sound gets more distorted: getting crunchier, thicker and increasing in

saturation.

BASS Knob –Is an EQ control for the bass or low frequency response

of the Metal Muff. At its full clockwise position, the BASS knob provides

+18.5dB of boost at a center frequency of 105Hz. At its full counter-

clockwise position, this knob provides -18.5dB of attenuation at the same

center frequency of 105Hz. In the middle, center-detent position, the

bass frequencies are not altered.

TREBLE Knob –Is an EQ control for the treble or high frequency

response of the Metal Muff. At its full clockwise position, the TREBLE

knob provides up to +20dB of upper frequency boost starting at 700Hz.

At its full counter-clockwise position, this knob provides up to - dB of 20

upper frequency tenuation starting at the same 700Hz frequency. In at

the middle, center-detent position, the treble frequencies are not tered. al

SCOOP Switch – Provides two settings of attenuation in the middle

frequency range. T middle position of the SCOOP switch, labeled LO, he

provides low/medium amount of scoop, attenuating b -7.5dB, a y

centered at a frequency of 1.2kHz The upper position of the SCOOP .

switch, labeled HI, provides for a bigger scoop with an increased mid

frequency attenuation of -11dB centered at 1.2kHz. In the down

position, labeled OFF, there is no mid frequency attenuation.

GATE Button – When pushed down, the GATE button enables the gate

function of the METAL MUFF. When the GATE button is enabled, the

METAL MUFF LED is green. In the up position, the GATE button disables

the gate function and the METAL MUFF LED is RED.

Gate THRESHOLD Knob –Controls the input amplitude needed to

open the GATE. As you turn the THRESHOLD knob clockwise, the

amount of gating increases, requiring a louder signal to open the gate

and allow your instrument to pass through. Turning the THRESHOLD

knob down all the way is equivalent to disabling the GATE function.

Please see Page 4 for more information on how to use the gate function.

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Ikke kategoriseret
Model:	Tone Tattoo

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Tone Tattoo stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Electro Harmonix Manualer

Electro Harmonix Good Vibes Manual

1 Januar 2025

Electro Harmonix OD Glove Manual

29 December 2024

Electro Harmonix Soul POG Manual

29 December 2024

Electro Harmonix Memory Boy Manual

29 December 2024

Electro Harmonix Super Switcher Manual

4 December 2024

Electro Harmonix Crayon 69 Manual

18 November 2024

Electro Harmonix POG III Manual

11 Oktober 2024

Electro Harmonix Cock Fight Manual

4 September 2024

Electro Harmonix Cock Fight Plus Manual

4 September 2024

Electro Harmonix The Worm Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo DFM-32-100-B-PPV-A-KF Manual

17 Juni 2025

Playtive IAN 285777 Manual

17 Juni 2025

Festo VAEM-L1-S-M3-26 Manual

17 Juni 2025

Festo DFPC-320 Manual

17 Juni 2025

EFX ICAK12 Manual

17 Juni 2025

Bearware 307294 Manual

17 Juni 2025

Futaba MC-9200H/A Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16517800 Manual

17 Juni 2025

OmniMount 2N1-S Manual

17 Juni 2025

Festo DSNU-S-12- -F1A Manual

17 Juni 2025