Electro Harmonix Triboro Bridge Manual


Læs gratis den danske manual til Electro Harmonix Triboro Bridge (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Electro Harmonix Triboro Bridge, eller vil du spørge andre brugere om produktet?

Side 1/4
TRIBORO
BRIDGE
User Manual
Overdrive | Distortion | Fuzz
Welcome to the Electro-Harmonix Triboro Bridge,
a compact pedal featuring three unique saturation
algorithms: overdrive, distortion, and fuzz. The
overdrive is based on the algorithm featured in the
EHX Platform Stereo Compressor, the fuzz is based
on the algorithm featured in the EHX Attack
Decay, and the distortion is a new algorithm
unique to the Triboro Bridge.
Operating Instructions
Insert the output plug from the supplied 9VDC AC
adapter into the power jack at the top of the Triboro
Bridge. The unit must be powered to pass signal,
even in bypass. The Triboro Bridge features buffered
analog bypass. Connect an instrument cable from
your instrument to the Input jack. Connect an
instrument cable between the Output jack and a
suitable amplifier. Click the footswitch to engage
the Triboro Bridge and light the LED.
8
9
1 2
5
6
6
3 4
7
Power Suppy Requirements: Voltage: 9VDC Current: 100mA Polarity: Center-Negative
This device comes equipped with an Electro-Harmonix 9.6DC-200 power supply. Use of the wrong adapter or a
plug with the wrong polarity may damage the device and void the warranty. Do not exceed 10.5VDC on the power
plug. Power supplies rated for less than 100mA may cause the device to act unreliably.


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: Triboro Bridge

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Triboro Bridge stil et spørgsmål nedenfor, og andre brugere vil svare dig