Electro Harmonix V256 Vocoder Manual

Electro Harmonix Ikke kategoriseret V256 Vocoder

Læs gratis den danske manual til Electro Harmonix V256 Vocoder (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Electro Harmonix V256 Vocoder, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

V256

Vocoder

Congratulations on your purchase of the Electro-Harmonix V256 Vocoder The V256 is a .

versatile and easy to use vocoder with the added benefit of being in a compact pedal format.

Musicians no longer need large rack equipment, computer plugins, or large keyboards to get

a wide array of classic and modern vocoder sounds as well as a few very unique vocal

transposition effects. The V256 includes internal synthesizers for easy vocoding without an

external instrument.

Special Features of th V256: e



3 VOX-ROBO vocoder modes that feature a robotic synthesizer



Single, Major, and Minor modes feature a drone synthesizer



3 Brand new vocal transposition modes including TRANSPOSITION INSTRUMENT CTRL, and ,

REFLEX-TUNE



Vocoder bands adjustable from a vintage sounding 8 bands to a smooth sounding 256 bands



TONE GENDER BENDER, and PITCH controls ,



Save and load up to 9 presets: 1 preset for each mode.



Scroll through the presets using the MODE knob or PRESET footswitch.



Built-In balanced Mic Pre-Amp with switchable Phantom Power and Gain adjustment.



Effect output on balanced XLR line output and 1/4” unbalanced instrument output

WARNING: Use only the AC Adapter that the V256 comes supplied

with Do not use any other AC Adapters. Using other AC adapters, .

even those made by Electro-Harmonix, could cause harm to the unit,

the adapter or you. The V256 does not use batteries.

- QUICK START GUIDE -

BASIC MIXER CONNECTION SETUP

1. Connect your microphone to the MIC input on the right side of the V256 using a

balanced XLR cable .

2. Using an unbalanced instrument cable, plug your instrument into the INST Input Jack on

the right side of the V256.

3. Connect a balanced XLR cable to the EFFECT output jack on the left side of the V256.

Connect the other end of the XLR cable to the line input of a mixer.

4. Connect an unbalanced instrument cable from the INST output jack on the left side of

the V256 Connect the other end of the instrument cable to the instrument input of a .

mixer, or the input of an amplifier.

5. Plug the AC Adapter into a wall outlet.

6. Plug the barrel connector of the AC Adapter into the 9V power jack at the top of the

V256.

Polarity is center negative

7. If using a condenser microphone, flip the Phantom Power switch up to the top position,

otherwise leave it off. The Phantom Power switch is located on the right side of the

V256, next to the XLR M input. IC

8. Push the M BYPASS footswitch until its associated LED is OFF. Sing into the IC

microphone, you will hear your dry vocal at this point. Adjust mixer settings as well as

the MIC GAIN switch on the V256 to obtain optimal mic levels.

BASIC AMPLIFIER CONNECTION SETUP

1. Connect your microphone to the MIC input on the right side of the V256 using a

balanced XLR cable.

2. Using an unbalanced instrument cable, plug your instrument into the INST Input Jack on

the right side of the V256.

3. Connect an unbalanced instrument cable from the INST output jack on the left side of

the V256. Connect the other end of the instrument cable to the input of a guitar, bass,

or keyboard amplifier.

4. Plug the AC Adapter into a wall outlet.

5. Plug the barrel connector of the AC Adapter into the 9V power jack at the top of the

V256.

Polarity is center negative

6. If using a condenser microphone, flip the Phantom Power switch up to the top position,

otherwise leave it off. The Phantom Power switch is located on the right side of the

V256, next to the XLR MIC input.

7. Push the MIC BYPASS footswitch until its associated LED is OFF. Play the instrument,

you will hear only dry instrument signal at this point.

Produkt Specifikationer

Mærke:	Electro Harmonix
Kategori:	Ikke kategoriseret
Model:	V256 Vocoder

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix V256 Vocoder stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Electro Harmonix Manualer

Electro Harmonix Holy Grail Neo Manual

5 August 2025

Electro Harmonix Pico Rerun Manual

5 August 2025

Electro Harmonix Oceans 11 Reverb Manual

5 August 2025

Electro Harmonix Envelope Filter Manual

5 August 2025

Electro Harmonix 9DC-100 Manual

30 Juli 2025

Electro Harmonix C9 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Electro Harmonix Nano Deluxe Memory Man Manual

30 Juli 2025

Electro Harmonix 40DC-100 Manual

30 Juli 2025

Electro Harmonix Big Muff Pi w. Tone Wicker Manual

30 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025

OnTruss EventBoard C90I BASIC Manual

20 August 2025

Tefal Quickchef HB672B Manual

20 August 2025

Gravity XW GLOVE Manual

20 August 2025

Roland V-4CF Manual

20 August 2025

Tefal Uno M FF133D Manual

20 August 2025

LD Systems MAUI 5 GO 100 BC W Manual

20 August 2025

Moulinex Bake Partner QA523B Manual

19 August 2025

Uniprodo UNICLEAN 142B Manual

19 August 2025

Tefal Body Partner LL9503 Manual

19 August 2025