EtherWAN INJ30AT Manual

EtherWAN Audio/video konverter INJ30AT

Læs gratis den danske manual til EtherWAN INJ30AT (1 sider) i kategorien Audio/video konverter. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om EtherWAN INJ30AT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

INJ30AT

5/19/2022

INJ30AT Hardened PoE Injector

Installation Guide

1 Unpacking

Unpack the items. Your package should

include:

 One INJ30AT PoE Injector

 Power input terminal block

 Wall and DIN-Rail mounting hardware

brackets

If items are missing or damaged, notify your

EtherWAN representative. Keep the carton

and packing material.

More information available at:

https://www.etherwan.com/us

For warranty information, visit:

https://www.etherwan.com/us/support/war

ranty-policy

2 Equipment Needed

 Category 5e or better cable for RJ-45

ports

 Power supply with supplied voltage within

specified range of 48 to 56VDC

3 Select a Location

 DIN-rail installations: Attach the bracket

on the unit using the included screws and

then mount on a DIN-rail.

 Wall installations: Attach the brackets on

the unit using the included screws and

then mount on a wall.

 Identify a power source within 6 feet (1.8

meters).

 Choose a dry area with ambient

temperature between -40 and 75ºC (-40

and 167ºF).

 Keep away from heat sources, sunlight,

warm air exhausts, hot-air vents, and

heaters.

 Make sure there is adequate airflow.

4 Connect to the Ports

The INJ30AT has the following ports:

 2 10/100/1000 Mbps copper ports

10/100/1000BASE-T Ports

Port labeled “Data” can be connected to a

switch or a router. Port labeled “Power” can

be connected to a PoE device (PD).

5 Connect Power

Terminal Block

Connect the unit to a suitable power supply

using appropriate wire, 18-24AWG, rated for

105°C or higher.

Redundant power is supported. However,

only one power input is required to operate

the unit.

1. Connect power wires to the

appropriate V1+/- or V2+/- pins on

the terminal block.

2. Connect the grounding wire to the

ground screw.

3. Plug the terminal block into the

socket.

6 Front Panel LEDs

LED Panel Layout

LED Color Status

Power

1 & 2

Green ON = power detected

OFF = power not detected

PoE Green ON = PD is detected

Off = No PD detected

Produkt Specifikationer

Mærke:	EtherWAN
Kategori:	Audio/video konverter
Model:	INJ30AT

Har du brug for hjælp?

Hvis du har brug for hjælp til EtherWAN INJ30AT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Audio/video konverter EtherWAN Manualer

EtherWAN EL900 Manual

8 November 2025

EtherWAN EL8020 Manual

8 November 2025

EtherWAN INJ30AT Manual

7 November 2025

EtherWAN EMC1600 Manual

5 November 2025

EtherWAN EL2315 Manual

4 November 2025

EtherWAN EXT1200 Manual

3 November 2025

EtherWAN EL2242-BT Manual

2 November 2025

EtherWAN EL2321 Manual

2 November 2025

EtherWAN EM2000 Manual

2 November 2025

EtherWAN EXT1100 Manual

2 November 2025

Audio/video konverter Manualer

Nyeste Audio/video konverter Manualer

Lynx Technik Yellowbrik CQS 1462 Manual

7 November 2025

MuxLab 500756-RX Manual

7 November 2025

MuxLab 500450-LR Manual

7 November 2025

MuxLab 500764-TX-V2 Manual

7 November 2025

MuxLab 500763-TX Manual

6 November 2025

Opticis DPFX-700-TR Manual

6 November 2025

Lynx Technik greenMachine Titan Manual

6 November 2025

Opticis DPX-1F12-TR Manual

6 November 2025

Opticis DPX-1F14A-TR Manual

6 November 2025

Tripp Lite B156E-003-8K-K Manual

5 November 2025