EXSYS EX-1321 Manual

EXSYS Netværkskort/adapter EX-1321

Læs gratis den danske manual til EXSYS EX-1321 (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om EXSYS EX-1321, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

6 5

Mit dem EX-1321 können Sie Notebook, Desktop Rechner oder Server im 19-Zoll Rack über

den USB 3.2 Gen 1 oder 2.0 Ausgang in ein 10/100/1000Mbps Netzwerk einbinden. Der EX-

1321 kann gleichzeitig zu einer bestehender Netzwerkkarte installiert werden. Die Installation ist

sehr einfach ohne, dass die Systeme geöffnet werden müssen. Die Bauform des EX-1321 ist

sehr kompakt und robust und bietet somit einen optimalen Einsatz in rauen Umgebungen. Mit

dem EX-1321 wir ein DIN-Rail Kit mitgeliefert, für die Installation in ein 19-Zoll Rack.

Kompatibilität: USB 1.1, 2.0, 3.2 Gen 1 / TCP/IP 10/100/1000

Betriebssysteme: Windows XP/ Vista/ 7/ 8.x/ 10/ 11/ Server 20xx/ Linux/ Mac OS

Anschlüsse: 1x USB 3.2 Gen 1 B-Buchse, 1x RJ45 Gigabit Ethernet Anschluss

Lieferumfang: EX-1321, USB 3.2 Gen 1 Kabel (verschraubbar),

Wandmontagehalterung, DIN-Rail Kit, Anleitung

BESCHREIBUNG & TECHNISCHE DATEN

AUFBAU

ANSCHLUSS & STATUS LEDs

RJ45 Anschluss:

RJ45 Anschluss

Pin Signal Pin Signal Pin Signal

1 BI_DA+ 4 BI_DC+ 7 BI_DD+

2 BI_DA- 5 BI_DC- 8 BI_DD-

3 BI_DB+ 6 BI_DB-

Anleitung

Vers. 1.1, 24.04.25

Anleitung

EX-1321

Switzerland:

EXSYS Vertriebs GmbH

Dübendorfstrasse 17

8602 Wangen

www.exsys.ch

Germany:

EXSYS Vertriebs GmbH

Industriestrasse 8

61449 Steinbach

www.exsys.de

Italy:

EXSYS Italia Srl

Via Belvedere, 45/B

I-22100 Como

www.exsys.it

USB 3.2 B-Buchse zum

Anschluss an den PC

Betriebs LED

RJ45 Anschluss

HARDWARE INSTALLATION

DRIVER INSTALLATION

Because there are large differences between PC’s, we can give you only a general installation

guide for the EX-1321. Please refer your computer’s reference manual whenever in doubt.

1. Connect the supplied USB 3.2 Gen 1 cable to the USB B-Port of the EX-1321.

2. Now connect the other end of the supplied USB 3.2 Gen 1 cable to a USB A-Port on your

PC.

3. Now you can connect a network cable at the EX-1321.

CLEANING

Windows XP/ Vista/ 7/ 8.x/ 10/ Server 20xx

Once the hardware installation is complete, the operating system automatically recognizes the

EX-1321 and installs it. If the drivers are not installed automatically, you can download the

drivers from our website (www.exsys.de or www.exsys.ch) under “Downloads” for your product.

Now open the folder of your operating system and start the „setup“ application located there.

Now follow the installation instructions and complete the installation.

CHECK INSTALLED DRIVER

Open the >Device manager<. Now you should see at „Ethernet Adapter“ the following new

entry:

If you see this or a similar information the device is installed correctly.

For cleaning please use only a dry fluff less cloth and remove the dirt with gently pressure. In

the area of the connectors please make sure that no fibres from the cloth remain in the connect-

ors. Attention! Never use a moist or wet cloth for cleaning!

CONNECTOR & STATUS LEDs

Status LED‘s:

LED Name

Color

LED Function

Link/Act

Green

Continuously on: The Connection on the Ethernet port

is built and Active

Flash: Transmit Data

Off: Network connection is disconnected

Speed

Yellow

Off: 10/100Mbps Mode

Continuously on: Gigabit (1000Mbps) Mode

Attention!

Never plug in with

force or in wrong

direction

USB 3.2 Gen 1 B-Port:

StdB_SST

D-

StdB_SSTX

GND_DRAI

StdB_SST

D+

VBus

DRIVER INSTALLATION

Linux

Once the hardware installation is complete, the operating system automatically recognizes the

EX-1321 and installs it. If the drivers are not installed automatically, you can download the

drivers from our website (www.exsys.de or www.exsys.ch) under “Downloads” for your product.

Now open the folder of your operating system and remove the drivers for installing the EX-1321.

Mac OS

Once the hardware installation is complete, the operating system automatically recognizes the

EX-1321 and installs it. If the drivers are not installed automatically, you can download the

drivers from our website (www.exsys.de or www.exsys.ch) under “Downloads” for your product.

Now open the folder of your operating system and remove the drivers for installing the EX-1321.

Produkt Specifikationer

Mærke:	EXSYS
Kategori:	Netværkskort/adapter
Model:	EX-1321
Bredde:	75 mm
Dybde:	42.5 mm
Højde:	20.5 mm
Vægt:	300 g
Brugervejledning:	Ja
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-40 - 75 °C
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Driftstemperatur (T-T):	0 - 55 °C
Ethernet LAN-datahastigheder:	100,1000,10000 Mbit/s
Husmateriale:	Metal
Kabler inkluderet:	USB
Forbindelsesteknologi:	Ledningsført
Kabelteknologi:	10/100/1000BaseT(X)
Netværksstandarder:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u
LED-indikatorer:	Power, Status
Antal USB-porte:	1
Bæredygtighedscertifikater:	RoHS
Kompatible operativsystemer:	Windows XP/Vista/7/8/8.1/10 (32/64-Bit), \nWindows Embedded Compact 7 (CE 7.0/6.0/5.0)\nLinux 2.6.x oder höher, MAC OS 10.x
Værtsgrænseflade:	USB
Grænseflade:	Ethernet
Intern:	Ingen
Maksimal dataoverførselshastighed:	1000 Mbit/s
Drivere inkluderet:	Ja
Relativ luftfugtighed:	5 - 95 %