EXSYS EX-6074PoE-2 Manual


Læs gratis den danske manual til EXSYS EX-6074PoE-2 (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om EXSYS EX-6074PoE-2, eller vil du spørge andre brugere om produktet?

Side 1/2
6 5
Die EX 6074PoE 2 ist eine High Speed Gigabit Ethernet PCI Express Karte mit Power over - - - -
Ethernet (PoE) Funktion. Sie ist mit vier externen Ports ausgestattet. Jeder Port hat einen
eigenen Realtek Chip für eine optimale und schnelle Datenübertragung. Sie unterstützt alle PCI
-Express Slots von x4 bis x16. Der PCI Express Bus unterstützt optimal die Leistung des -
schnellen Realtek Chipsatz. Die EX 6074PoE 2 gewährleistet so eine sichere Datenübertra-- -
gung und exzellente Performance von bis zu 1Gbit/s! Die EX PoE 2 liefert isolierte 48V -6074- -
über das Ethernet Kabel für PoE (PD) Geräte. Die Karte unterstützt auch Crossover Erkennung - -
und Auto Korrektur Funktion für die einfache Netzwerkverkabelung.- -
1
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
Anleitun
Vers. 1.0 / 15.08.22
E 6074Po
Kompatibilität: PCI Express p1-x4 bis x16 -
Betriebssysteme: Windows 98SE / ME / 2000 / XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx
Mac / Linux / UNIX / Novell
Anschlüsse: 4x RJ45 Gigabit Ethernet Anschluss, 1x SATA 15 Pin Anschluss, -
- 1x 4 Pin Molex Anschluss
Lieferumfang: 6074PoE 2, Treiber CD, Anleitung EX- -
Zertifikate:
4x RJ45 Anschluss
Status LED s
RJ45 Anschluss:
RJ45 Anschluss
Pin Signal Pin Signal Pin Signal
1 BI_DA+ 4 BI_DC+ 7 BI_DD+
2 BI_DA 5 BI_DC 8 BI_DD - - -
3 BI_DB+ 6 BI_DB -
J3:
SATA 15 Pin -
Power Anschluss
vom PC Netzteil-
J2:
4 Pin Molex -
Power Anschluss
vom PC Netzteil-
DRIVER INSTALLATION
Please note the following installation instructions. Because there are large differences between the
PCs, we can give you only a general installation instructions for the EX-6074PoE 2. Please refer -
your computer s reference manual whenever in doubt.
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer and
gently slide the cover off.
3. Locate an available PCI-Express expansion slot and insert the card. Make sure that the card
is plugged in correctly.
4. Now install the power supply via the 4 Pin Molex or SATA 15 Pin connector. (see picture - -
Connectors J2 or J3)
5. Then attach the card with a screw to the rear panel of the computer.
6. Gently replace your computer s cover and the mounting screws.
Windows 98SE / ME / 2000 / XP / Vista / 7 / Server 2003 & 2008R2
After starting Windows is recognizes a new . Please insert the Driver CD Ethernet Controller-
into your CD Rom drive (e.g. Drive D:) and open the folder LAN/RTL8111B G Please select --“.
the folder with your operating system and install the driver (see Picture). Follow the hardware
assistant and finish the installation. Restart your PC in any case after installing the Important!
drivers.
Follow the installation instructions and complete the installation.
Windows will now install automatically you right driver for your particular operating system. After
the installation the operating system detects the card and automatically install them.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at Networkadapter the following new
entry's:
If you see this or a similar information the device is installed correctly.
Windows 8.x / 10 / 11 / Server 2012R2 / 2016 / 2019 / 2022
After the hardware installation, the operating system will recognize the device automatically and
install the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at Networkadapter the following new
entry's:
If you see this or a similar information the device is installed correctly.
Status LED´s:
LINK / Activity LED
PoE LED
CONNECTORS & LED S
LED Name Color LED Function
LINK (ACT) Green
Steady on: Linked
Blinking: Data Transmission
PoE
Yellow
Steady on: PoE enabled
Off: PoE disabled
J2:
J3:
Pin Assignment Pin Assignment Pin Assignment
1 3.3 Volt (Orange) 5 Volt (pre charge) 12 Volt (pre 7 - 13 - charge)
2 3.3 Volt (Orange) 8 5 Volt (Red) 12 Volt (Yellow) 14
3 3.3 Volt (pre charge) 9 5 Volt (Red) - 15 12 Volt (Yellow)
4 Ground (Black) 10 Ground (Black)
5 Ground (Black) 11 Reserve
6 Ground (Black) 12 Ground (Black)
To use the PoE function of the EX 6074PoE 2 and to supply the end devices with power, the - -
card must be connected to the power connector of the PC power supply! Only one power
connector may be used J2 J3! OR
Please pay attention to the correct polarity!
Attention! Never connect or release the plug while the PC is supplied with power!
1 +12V 2 GND 3 GND 4 +5V
To use the PoE function of the EX 6074PoE 2 and to supply - -
the end devices with power, the card must be connected to
the power connector of the PC power supply! Only one
power connector may be used J2 J3! OR
Please pay attention to the correct polarity!
Attention! Never connect or release the plug while the
PC is supplied with power!
HARDWARE INSTALLATION


Produkt Specifikationer

Mærke: EXSYS
Kategori: Netværkskort/adapter
Model: EX-6074PoE-2

Har du brug for hjælp?

Hvis du har brug for hjælp til EXSYS EX-6074PoE-2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter EXSYS Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer