FlinQ FQC8143 Manual

FlinQ Lettelse FQC8143

Læs gratis den danske manual til FlinQ FQC8143 (8 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om FlinQ FQC8143, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
FlinQ LED Iceman light
FQC8143
USER MANUAL
Thank you for purchasing this FlinQ LED Iceman Light!
Please fully charge this device before use!
It takes about 3hours to fully charge it. The LED indicator will flash during charging and stays on when fully charged. The battery
supports portable use for 20 hours under warm yellow light and 15 hours under RGB 7 color changing mode. If no action is
done the light will switch off automatically after 2 hours to save the battery power.
Please read this user manual completely before using the device and save it for the future.
GENERAL INFORMATION
1.Iceman Silicone body
2.Micro-USB charge/power input
3.Power on/off button
4.LED indicator
SPECIFICATIONS
Input: 5V/1A
Body material: Silicone
Type of built-in battery: Li-ion
Battery capacity: 1200mAh/4.44Wh
MAX power*:up to 0.15W(white) / up to 0.3W(color)
Working time: up to 20 hours(white) max / up to 15 hours(color) max
Lifetime LED: Up to 30000 hours
Size:116x117x180mm
*brightness may decrease during operation as battery discharges. Maximum brightness achieved when the battery is fully charged!
HOW TO CHARGE
1.Turn off the LED lamp
2.Plug your Iceman LED Lamp into your PC’S USB port or a wall USB charger(not supplied, you can use it from any
smartphone/tablet device) with the USB charging cable(supplied)
3. LED indicator blinks red while charging. When LED indicator stops blinking, the charging is complete
HOW TO USE
Power ON/OFF:
Short press the power button to turn on. Press power button again to turn off. If there isn’t any action, Iceman LED
lamp will automatically turn off in 2 hours
MODE CONTROL
Mode 1 activates when the power is on. To change operating modes tap hard on the device’s body or take it by the
hand and put it down again on a table or desk to change it.
Operating modes:
Mode 1: Device continuously turns white
Mode 2: Gradient change of colors: white-blue-red-green-purple-light blue-orange
Mode 3: Device continuously gives the color selected in mode 2
Mode 4: Standby mode. In this mode the device is still generating the current. If you don’t use the device for a long
time, please turn it off.
MUSIC MODE AND SILENT MODE
LED lamp can work both in silent mode and in music mode. To switch to music mode press and hold the Power button
WHEN IN MODE 1,2 OR 3. LED indicator lites red color in music mode. In this mode you will hear the music if turn on the
operating mode 2(gradient change of colors). Music will play for 10 seconds, and then will automatically turn off. You
can tap the silicone body one more time again or take it in the hand and put it down the table or desk 2X, then the
device will switch to operating mode 3 and will play music for 30 seconds one more time, and then will automatically turn
off. To play music again you
Need to switch to operating mode 2 again as described before. To switch back to silent mode press and hold the Power button. LED
indicator will turn off again.
SAFETY INFORMATION
1.Before charging be sure that voltage of the power is 5V.The recommended adapter is 5V/1000mA
2.If device is not used for a long time, charge it at least once per month
3.Before charging the device be sure that you use USB micro-USB cable. Using an incompatible cable can damage the
device
4.Do not store, use or charge device near heat sources and flammable objects, during low or high ambient
temperature. Charging can be done only under adult supervision. Recommended temperature is 5 to 35°C
5.Do not expose the device to strong impacts or mechanical shock. Do not attempt to disassemble, repair or modify
device by yourself. Any changes in construction entail the termination of the warranty. Contact service center if device
needs to be repaired.
6.The device should be protected from damp, rain, dust and dirt .Do not allow water to enter the device, do not put the
device in water
7.Not allowed to prolonged exposure of direct sunlight on the device
8.Keep the device out of the reach of children. Do not bite or lick the device, as this may damage or explode the device.
This device should not be used by children or persons with disabilities without explode the device. This device should
not be used by children or persons with disabilities without supervision of the responsible person providing safe use
9.Do not insert foreign objects into the device interfaces
10.Use dry soft lint-free clothes to clean device. Not allowed to use washing or cleaning liquids.
11.The device is not intended for commercial use.
12.Do not cover working device by cloth or other material
IN THE BOX
1.FlinQ LED Iceman light
2.Micro-USB charge cable
3.User Manual

Produkt Specifikationer

Mærke: FlinQ
Kategori: Lettelse
Model: FQC8143

Har du brug for hjælp?

Hvis du har brug for hjælp til FlinQ FQC8143 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lettelse FlinQ Manualer

FlinQ

FlinQ FQC8140 - Star Light Manual

24 August 2024
FlinQ

FlinQ LUXXTREE 4 meter Manual

23 August 2024
FlinQ

FlinQ 250 LED Light chain Manual

22 August 2024
FlinQ

FlinQ FQC8148 Manual

22 August 2024
FlinQ

FlinQ FQC8148 - 2.5m Manual

22 August 2024
FlinQ

FlinQ FQC8143 Manual

21 August 2024
FlinQ

FlinQ FQC8230 - Luxxtree Manual

21 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Schwaiger

Schwaiger CALE100 511 Manual

9 April 2025
ADB

ADB Orkis Fresnel Manual

8 April 2025
Claypaky

Claypaky Actoris ParLED Manual

8 April 2025
ET2

ET2 Waterfall E24846-90 Manual

8 April 2025
Dainolite

Dainolite V166-1W Manual

5 April 2025
Dainolite

Dainolite OFE-161P Manual

5 April 2025
Dainolite

Dainolite DMLED10-A-5D Manual

5 April 2025
Dainolite

Dainolite DM1958F Manual

5 April 2025
NUVO

NUVO Ballerina 60/1265 Manual

4 April 2025
NUVO

NUVO SF77/196 Manual

4 April 2025