FlinQ FQC8230 - Luxxtree Manual

FlinQ Lettelse FQC8230 - Luxxtree

Læs gratis den danske manual til FlinQ FQC8230 - Luxxtree (11 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om FlinQ FQC8230 - Luxxtree, eller vil du spørge andre brugere om produktet?

Side 1/11
FLAGPOLE LIGHT CHAIN
VLAGGENMAST LICHTKETTING
FAHNENMAST LICHTERKETTE
CHAÎNE LUMINEUSE DE MÂT DE DRAPEAU
CATENA LEGGERA DELLASTA DELLA BANDIERA
CADENA LIGERA DE ASTA DE BANDERA
FLINQ LUXXTREE
FQC8230
2
OFF
DIM
-
1
3
5 6 7
9 108
2
4
TIMER
OFF
TIMER
ON
TIMER
8h
DIM
-
ON
1 x remote
2 x middle poles
1 x spear
1 x remote 8 x ground peg 10 x strips
1 x top with light chain
A
A
C
B
E
D
F
1 x control box 2010
Safety instruction:
Read the user instructions carefully before use.
Save these instructions for future reference.
See packaging and label on the product.
Warning:
The product must be free of all packaging before
use!
If the product is broken or there are other
irregularities – do not use it.
This product is for indoor and outdoor use (IP44).
Bulbs and cable cannot be removed or replaced.
Do not in any way try to alter the product.
Use:
There are 2 buttons on the control box.
Left button: Timer
Right button: Mode
Left button “Timer” can activate the dimmer
function and the timer function:
Dimmer function:
Press timer button (short press) to use dimmer
function (4 levels).
These functions can also be activated on the remote
control.
Timer function:
To activate the timer function press timer button
for 3 seconds, a green light will turn on. The timer
function 6h on / 18h is activated.
Press the timer button again for 3 seconds, a red
light will turn on. Timer function 8h on / 16h is
activated.
To turn off the timer function, press the same timer
button again for 3 seconds. The light will turn off to
indicate that the timer function is now off.
The timer settings can also be used on the remote
control.
MODE Button:
10 Functions - Press right button to switch between
the functions.
1. COMBINATION
2. IN WAVES
3. SEQUENTIAL
4. SLO-GLO
5. CHASING/FLASH
6. SLOW FADE
7. TWINKLE/FLASH
8. STEADY A
9. STEADY B
10. STEADY C
Explanation of safety classes:
Light chain is Class III, with Class II adapter.
= Safety class III. The voltage is so low, that a
person under normal circumstances can get
in touch with this without risk of shock.
= Safety class II. User protection from
electric shock is achieved through two levels
of insulation (either double or reinforced)
MANUAL
FLINQ LUXXTREE FLAGPOLE LIGHT CHAIN
EN


Produkt Specifikationer

Mærke: FlinQ
Kategori: Lettelse
Model: FQC8230 - Luxxtree

Har du brug for hjælp?

Hvis du har brug for hjælp til FlinQ FQC8230 - Luxxtree stil et spørgsmål nedenfor, og andre brugere vil svare dig