FlinQ FQC8148 Manual

FlinQ Lettelse FQC8148

Læs gratis den danske manual til FlinQ FQC8148 (4 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13 anmeldelser. Har du et spørgsmål om FlinQ FQC8148, eller vil du spørge andre brugere om produktet?

Side 1/4
FLINQ
HANDMADE
ROPE LAMP 1 METER
FQC8148
1MT Rope Light
Dear Customer, before use please read this manual carefully and follow the
instructions as provided. Keep these instructions for later use.
Step 1: Check if all parts are included (as the picture) and prepare a screwdriver,
wire cutter, drill and scissors (if needed). Cut of the plastic insulation 6-8mm from
the power wire to see the metal wire’s inside.
Step 2: Install the mounting bracket to the ceiling with the plug’s and screws and
mark it on the preferred location.
Step 3,4 and 5: Put the wires thru the hole from the black top cover and add the
ground wire with the connection part in the middle of the metal screw fixations so
it is earthed well. Then add the white separate Thule around the wire’s for
protection and insulation.
Step 6: Switch off the main power and connect the 3 wire’s with the terminal
block that’s included. Brown (live wire +) to the L connection by pressing the
button’s and release when connected well. Do the same for Blue (neutral wire -)
to the N connection and Yellow/Green (earth wire) to the earth connection. Now
fix the black top cover to the mounting bracket and install tightly with the screws.
Turn ON the main power and switch the light ON.
HEMP LIGHT
FLINQ
HANDGEMAAKTE
TOUWLAMP 1 METER
FQC8148
1MT Touwlamp
Beste klant, lees deze handleiding zorgvuldig door voor u het product gebruikt.
Volg de instructies en bewaar deze voor latere referentie.
Stap 1: Controleer of alle onderdelen aanwezig zijn (zoals op de afbeelding) en
verzamel een schroevendraaier, draadschaar, boor en schaar (indien nodig). Snijd
de plastic isolatie 6 tot 8 mm van de stroomdraad af om de metaaldraad binnenin
te zien.
Stap 2: Installeer de montagebeugel op de gewenste locatie aan het plafond met
de pluggen en schroeven.
Stap 3,4 en 5: Steek de draden door het gat van de zwarte bovenklep en voeg de
aardedraad met het verbindingsdeel in het midden van de metalen
schroefbevestigingen toe zodat deze goed geaard is. Voeg vervolgens de witte
afzonderlijke Thule rond de draden toe voor bescherming en isolatie.
Stap 6: Zorg dat de elektriciteit is uitgeschakeld en verbind de 3 draden met het
meegeleverde aansluitblok. Sluit Bruin (stroomdraad +) aan op de L-aansluiting
door op de knoppen te drukken en los te laten wanneer deze goed is aangesloten.
Doe hetzelfde met Blauw (neutrale draad -) naar de N-aansluiting en Geel/Groen
(aardedraad) naar de aardverbinding. Bevestig vervolgens de zwarte bovenkap op
de montagebeugel en maak deze stevig vast met de schroeven. Schakel de
hoofdvoeding in en zet het licht aan.
TOUW LAMP


Produkt Specifikationer

Mærke: FlinQ
Kategori: Lettelse
Model: FQC8148

Har du brug for hjælp?

Hvis du har brug for hjælp til FlinQ FQC8148 stil et spørgsmål nedenfor, og andre brugere vil svare dig