FlinQ FQC8148 - 2.5m Manual

FlinQ Lettelse FQC8148 - 2.5m

Læs gratis den danske manual til FlinQ FQC8148 - 2.5m (4 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9 anmeldelser. Har du et spørgsmål om FlinQ FQC8148 - 2.5m, eller vil du spørge andre brugere om produktet?

Side 1/4
FLINQ
HANDMADE
ROPE LAMP 2.5 METER
FQC8148
V1 User Manual
2.5MT Rope Light
Dear Customer, before use please read this manual carefully and follow the instructions as
provided. Keep these instructions for later use.
Step 1: Check if all parts are included (as the picture) and prepare a screwdriver, wire cutter,
drill and scissors (if needed). Cut of the plastic insulation 6-8mm from the power wire to see the
metal wire’s inside.
Step 2: Install the mounting bracket to the ceiling with the plug’s and screws and mark it on the
preferred location.
Step 3,4, 5 and 6: Put the 4 wires through the hole from the black top cover and add the ground
wire with the connection part in the middle of the metal screw fixations so it is earthed well.
Then add the white separate Thule around the wire’s for protection and insulation.
Step 7: Switch off the main power and connect the 3 wire’s with the terminal block that’s
included. First connect the wire’s with the same colors together, 2x brown and 2x blue. Then
connect the 2x Brown (live wire +) to the L connection by pressing the button’s on the terminal
block and release when connected well. Do the same for the 2x Blue (neutral wire -) to the N
connection and Yellow/Green (earth wire) to the earth connection. Now fix the black top cover
to the mounting bracket and install tightly with the screws. Turn ON the main power and switch
the light ON.
HEMP LIGHT
FLINQ
HANDGEMAAKTE
TOUWLAMP 2.5 METER
FQC8148
V1 Gebruikershandleiding
2.5MT Touwlamp
Beste klant, lees deze handleiding zorgvuldig door voor u het product gebruikt. Volg de
instructies en bewaar deze voor latere referentie.
Stap 1: Controleer of alle onderdelen aanwezig zijn (zoals op de afbeelding) en verzamel een
schroevendraaier, draadschaar, boor en schaar (indien nodig). Snijd de plastic isolatie 6 tot 8
mm van de stroomdraad af om de metaaldraad binnenin te zien.
Stap 2: Installeer de montagebeugel op de gewenste locatie aan het plafond met de pluggen en
schroeven.
Stap 3,4, 5 en 6: Steek de 4 draden door het gat van de zwarte bovenklep en voeg de aarddraad
met het verbindingsdeel in het midden van de metalen schroefbevestigingen toe zodat deze
goed geaard is. Voeg vervolgens de witte afzonderlijke Thule rond de draden toe voor
bescherming en isolatie.
Stap 7: Zorg dat de elektriciteit is uitgeschakeld en verbind de 3 draden met het meegeleverde
aansluitblok. Verbind eerst de draden met dezelfde kleuren samen, 2x bruin en 2x blauw. Sluit
vervolgens de 2x Brown (actieve draad +) aan op de L-aansluiting door op de knoppen op het
klemmenblok te drukken en los te laten wanneer deze goed is aangesloten. Doe hetzelfde voor
de 2x Blauw (neutrale draad -) naar de N-aansluiting en Geel / Groen (aardedraad) naar de
aardverbinding. Bevestig nu de zwarte bovenkap op de montagebeugel en plaats deze stevig
met de schroeven. Schakel de hoofdvoeding in en schakel het licht in.
TOUW LAMP


Produkt Specifikationer

Mærke: FlinQ
Kategori: Lettelse
Model: FQC8148 - 2.5m

Har du brug for hjælp?

Hvis du har brug for hjælp til FlinQ FQC8148 - 2.5m stil et spørgsmål nedenfor, og andre brugere vil svare dig