Gre PLREC Manual

Gre Lettelse PLREC

Læs gratis den danske manual til Gre PLREC (44 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Gre PLREC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/44

INSTALLATION AND MAINTENANCE MANUAL

MANUAL DE INSTALACIÓN Y MANTENIMIENTO

MANUEL D’INSTALLATION ET D’ENTRETIEN

EINBAU-UND BETRIEBSANLEITUNG

MANUALE DI INSTALAZIONE E MANUTENZIONE

INSTALLATIE- EN ONDERHOUDSHANDLEIDING

MANUAL DE INSTRUÇÕES E MANUTENÇÃO

RAPID PROJECTOR

PROYECTOR RAPID

PROJECTEUR RAPID

PROIETTORE RAPID

STRAHLER RAPID

SCHIJNWERPER RAPID

PROJETOR RAPID

Ref. PLREC / PLREB

ENGLISH

IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be im-

plemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before

beginning installation and start-up.

Keep this manual for future reference.

To achieve optimum performance of the LED Rapid Projector, follow the instructions provided below:

1. VERIFY THE CONTENTS OF THE PACKING:

The following accessories are included inside the box:

• Unit projector • Warranty booklet • Nozzle

•

1” 1/2 adaptor

• Installation and maintenance manual • Stufng box hose

• Manual for electrical connection • Spanner for adaptor

2. GENERAL CHARACTERISTICS:

This projector has been designed to be used totally submerged in water. It is a Class III electric apparatus with very low

safety voltage (12V with alternating current).

The projector compiles with IPX8 degree of protection (resistance to penetration of dust, solid bodies and humidity) at a

nominal immersion depth of 2 m.

This projector compiles with international safety standards for lights, especially the EN 60598-2-18 standard. LIGHTS

PART 2: SPECIFIC REQUIREMENTS SECTION 18 LIGHTS FOR SWIMMING POOLS AND SIMILAR APPLICATIONS.

The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric components

which have been inserted or handled at locations other than its own premises.

3. INSTALLATION:

• To correctly light a swimming pool we recommend you:

Install a projector in the range LED Rapid every 20 m² of water surface.

Note: Recommendation valid for light coloured pools. In darker coloured pools or stainless steel pools we recommend

oversizing the proportion of projectors per m².

• In order to prevent glare, the projectors should be installed so that they face away from the residence or usual view of

the swimming pool.

• In the event that lighting is used in training or competition pools, the projectors should be installed on the sides to

prevent glare on the swimmers.

• The spotlight should not be handled internally under any circumstances as this would lead to losing the guarantee.

• The LED Rapid projector has been designed to be ﬁtted to the bushing or piping; a siphon can be made or the stufﬁng

box kit installed (Fig. 1).

• The projector should be tted 400–700 mm under the surface of the water on one of the pool walls (Fig. 1). The way the

projector is tted will depend on whether the bushing or piping is used.

• Sealing all sections with resin systems or safety connections that comply with the IP68 rating is recommended to ensure

that both cables and cable sheaths are properly sealed. Failure to follow these steps may cause short- or long-term da-

mage to the light and installation cables.

4. ASSEMBLY:

Procedure:

1 - Install the bushing as shown in Figure 2; A (siphon) / B (Kit 65286).

2- Screw the adaptor into the bushing (Fig. 3).

2 - Insert the cable in the bushing, ease the projector in and turn 90º clockwise (Fig. 3).

3 - Ensure that the logo is uppermost (Fig. 4).

Replacing the projector

1. Give a quarter of a turn anti-clockwise, remove the projector until it has come out of the adaptor (Fig. 5b) and place it

on the edge of the pool.

2 - Loosen the stufng box assembly and then the wire connector; it is very important to follow the steps as shown (Fig. 6).

3- Reconnect the projector.

5. MAINTENANCE:

This lamp does not require any type of maintenance work. If you notice that the lamp is not working properly, please contact our

customer attention service.

Produkt Specifikationer

Mærke:	Gre
Kategori:	Lettelse
Model:	PLREC

Har du brug for hjælp?

Hvis du har brug for hjælp til Gre PLREC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lettelse Gre Manualer

5 September 2024

10 August 2024

6 August 2024

29 Juli 2024

24 Juli 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Schwaiger CALE100 511 Manual

9 April 2025

ADB Orkis Fresnel Manual

8 April 2025

Claypaky Actoris ParLED Manual

8 April 2025

ET2 Waterfall E24846-90 Manual

8 April 2025

Dainolite V166-1W Manual

5 April 2025

Dainolite OFE-161P Manual

5 April 2025

Dainolite DMLED10-A-5D Manual

5 April 2025

Dainolite DM1958F Manual

5 April 2025

NUVO Ballerina 60/1265 Manual

4 April 2025

NUVO SF77/196 Manual

4 April 2025