Hoshizaki F-822MAK Manual


Læs gratis den danske manual til Hoshizaki F-822MAK (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Hoshizaki F-822MAK, eller vil du spørge andre brugere om produktet?

Side 1/2
Modular Ice Machine
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Cube Dimensions*
* approximate size in inches, image not to scale
Features
• Durable stainless steel exterior
• Flaker - Up to 750 lbs. of ice production per
24 hours
• Cubelet - Up to 653 lbs. of ice production per
24 hours
• Mount two units, side-by-side, in only 44” of floor
space for double the amount of ice production
• 2 second flush cycle every hour
• Flush cycle removes sediment for cleaner ice
• Ultrasonic sensor opening
Advanced CleanCycle24
TM
design
Environmentally friendly R290
hydrocarbon refrigerant
Stainless steel auger with greaseless
bearing
Available on Bins:
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 108-127V
• If GFCI is required, a GFCI breaker MUST be used
in lieu of GFCI receptacle
Operating Limits
Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
Condenser Drain/Return Line: Minimum 1/4” Nominal ID
Hard Pipe (open drain system) or Copper Water Tubing
(closed loop system) or Equivalent
Plumbing
• Panels easily removed and all components
accessible for service.
• Removable/cleanable air filter (Air-cooled model only)
• Allow 6” (15 cm) clearance at rear and sides, and 24”
(61 cm) clearance at top for proper air circulation and
ease of maintenance/service.
Service
W x D x H
Hoshizaki reserves the right to change specifications without notice.
3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled
condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories.
Contact factory for warranty in other countries.
Warranty:
F-822MAK(-C)
F-822M_K(-C)
11/13/25
Item # 13037K
Slim-Line Series
Air-Cooled Cubelet
F-822MAK-C
1/2”
3/8”
3/4”
3/4”
Top kit may be required. See Bin Spec Sheets. *Two unit application only.
B-1150SS
B-1300SS
B-250SF
B-300SF
B-800SF
B-900SF
B-1500SS*
B-1650SS*
1”
Flaked Cubelet
F-822MAK F-822MAK-C
TM
22" x 24
1/4
" x 26"
F-822MAK
Air-Cooled Flaker
shown on B-500SF bin
B-500SF
B-700SF
Air / Water Temp
Lbs. per 24 hours
Condenser
Model
70°/ 50°F 90°/ 70°F
ICE PRODUCTION
Potable
Gal. per 100 lbs.
Condenser
Gal. per 100 lbs.
Heat
Rejection
BTU/hr.
Voltage
WATER USAGE
90°/ 70°F 90°/ 70°F
ELECTRICAL
90°/ 70°F
kWh Used
per 100 lbs.
Amperage
750
653
F-822MAK
F-822MAK-C
560
525
Air
Air
12.0
12.0
N/A
N/A
3.95
4.45
20A
20A
9.7A
9.7 A
115V/60/1
115V/60/1
6,400
6,400
181 / 190
181 / 190
Circuit
Wires
(including ground)
Net / Ship
Weight (lbs.)
Refrigerant
Charge Amount
3
3
5.3 oz.
5.3 oz.
Power cord not included. Must be hard-wired at site.
Volume:
28.5” x 26.75” X 32” 14ft
3
Shipping: (LxWxH)
Min. Circuit/
Max. Fuse
Size
F-822MAK
F-822MAK-C
F-822MAK-C
shown with 24”
Lancer Dispenser


Produkt Specifikationer

Mærke: Hoshizaki
Kategori: Ikke kategoriseret
Model: F-822MAK

Har du brug for hjælp?

Hvis du har brug for hjælp til Hoshizaki F-822MAK stil et spørgsmål nedenfor, og andre brugere vil svare dig