Intellinet 562041 Manual

Intellinet Skifte 562041

Læs gratis den danske manual til Intellinet 562041 (16 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Intellinet 562041, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
Scan to
register your
product warranty
Important: Read before use. • Importante: Leer antes de usar.
For additional benets:
or go to: register.intellinet-network.com/r/562041
54-Port L3 Fully Managed
PoE+ Switch with 48 Gigabit
Ethernet Ports and 6 SFP+ Uplinks
Instructions Model 562041 (IPS-54M06-10G-850W)
2
This guide presents the basic steps to set up and operate this device.
For the user manual and specifications, visit . Register your product intellinet-network.com
at register.intellinet-network.com/r/562041 or scan the QR code on the cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch
(and any other items that need to be considered);
• with a minimum of 25 mm (approx. 1”) of clearance
on the top and sides for adequate ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• where it cannot be affected by excessive moisture;
• within 100 m (approx. 328’) of network devices (RJ45) it’s to be connected to.
• Attach the rubber feet to the bottom of each corner of the switch to increase stability.
The switch includes brackets and screws for optional rack mounting.
1 Disconnect any cables from the switch.
2 Position a bracket over the mounting holes on one side
of the switch and secure it in place with screws.
3 Repeat Step 2 on the other side of the switch.
4 Position the switch in the rack and screw
the brackets to the rack.
5 Reconnect any cables.
Front Panel
• All ports on the switch support Auto-MDI/MDI-X functionality, so
you can use straight or crossover UTP/STP cables to connect the
RJ45 ports to PCs, routers, hubs, other switches, etc.
• Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t
English
Instructions

Produkt Specifikationer

Mærke: Intellinet
Kategori: Skifte
Model: 562041

Har du brug for hjælp?

Hvis du har brug for hjælp til Intellinet 562041 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skifte Intellinet Manualer

Intellinet

Intellinet 561846 Manual

4 September 2024
Intellinet

Intellinet 561617 Manual

3 September 2024
Intellinet

Intellinet 561945 Manual

3 September 2024
Intellinet

Intellinet 561686 Manual

3 September 2024
Intellinet

Intellinet 560641 Manual

21 August 2024
Intellinet

Intellinet 560849 Manual

17 August 2024
Intellinet

Intellinet 506441 Manual

17 August 2024
Intellinet

Intellinet 562041 Manual

1 Juli 2024
Intellinet

Intellinet 561969 Manual

1 Juli 2024
Intellinet

Intellinet 508261 Manual

1 Juli 2024

Skifte Manualer

Nyeste Skifte Manualer

D-Link

D-Link DSS-100E-9P Manual

29 Marts 2025
Digitus

Digitus DN-80113-2 Manual

27 Februar 2025
Yamaha

Yamaha SWX2322P-16MT Manual

21 Februar 2025
HELGI

HELGI HLG0801-HDBITT Manual

30 Januar 2025
HELGI

HELGI HLG0801-4K-HDBITT Manual

30 Januar 2025
Hamlet

Hamlet HN08GTX Manual

30 Januar 2025
HELGI

HELGI HLG0414 Manual

30 Januar 2025
LogiLink

LogiLink UA0085 Manual

29 Januar 2025
Powerfix

Powerfix PSSS 2 A1 Manual

14 Januar 2025
Ebara

Ebara ServoPress LP Manual

14 Januar 2025