JL Audio 5v2 Manual

JL Audio Bil forstærker 5v2

Læs gratis den danske manual til JL Audio 5v2 (45 sider) i kategorien Bil forstærker. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8 anmeldelser. Har du et spørgsmål om JL Audio 5v2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/45

OWNER’S MANUAL

Remote

Level

Mode

Turn-On

Mode

All | Sub Ch.

Input Mode

2 Ch. | 4 Ch. | 6 Ch.

Rem. | Oset | Signal

Input Voltage

Low | High

CH. 3

(L)CH. 4

(R)

CH. 1

(L)

CH. 1 & 2 CH. 3 & 4 SUB CH.

CH. 2

(R)

HP Filter Mode

Filter Freq. (Hz)

Input

Sens.

O | x1 | x10

Filter Mode

HP Filter Freq. (Hz)

Input

Sens.

O | BP | HP

LP Filter Mode

LP Filter Freq. (Hz)

Input

Sens.

O | 12dB | 24dB

Mono Subwoofer Output

(L)

(R)

CH. 1

CH. 2

CH. 3

CH. 4

SUB

INPUT SECTION

+12 VDC Ground Remote

5 Channel Amplifier wit h 2-Way / 3-Way Crossover

Thank you for purchasing a JL Audio amplifier for

your automotive sound system.

Your amplifier has been designed and manufactured to exacting

standards in order to ensure years of musical enjoyment in your vehicle.

For maximum performance, we highly recommend that you have

your new amplifier installed by an authorized JL Audio dealer. Your

authorized dealer has the training, expertise and installation equipment

to ensure optimum performance from this product. Should you

decide to install the amplifier yourself, please take the time

to read this manual thoroughly so as to familiarize yourself

with its installation requirements and setup procedures.

If you have any questions regarding the instructions in this

manual or any aspect of your amplifier’s operation, please contact your

authorized JL Audio dealer for assistance. If you need further assistance,

please call the JL Audio Technical Support Department

at (954) 443-1100 during business hours.

1000W 5-Channel Amplier with 2-Way / 3-Way Crossover

2 | JL Audio - XD1000/5v2 Owner’s Manual 3

ENGLISH

Mounting the amplifier upside down is

strongly discouraged. If mounting the amplifier

under a seat, make sure there is at least 1 inch

(2.5 cm) of space above the amplifier’s outer shell

to permit proper cooling.

Safety Considerations:

Your amplifier needs to be installed in a dry,

well-ventilated environment and in a manner

which does not interfere with your vehicle’s safety

equipment (air bags, seat belt systems, ABS brake

systems, etc.). You should also take the time to

securely mount the amplifier so that it does not

come loose in the event of a collision or a sudden

jolt to the vehicle.

Stupid Mistakes to Avoid

• Check before drilling any holes in your vehicle

to make sure that you will not be drilling

through a gas tank, brake line, wiring harness or

other vital vehicle system.

• Do not run system wiring outside or underneath

the vehicle. This is an extremely dangerous

practice which can result in severe damage to

your vehicle and person.

• Protect all system wires from sharp metal

edges and wear by carefully routing them,

tying them down and using grommets and

loom where appropriate.

• Do not mount the amplifier in the engine

compartment, under the vehicle, on the roof

or in any other area that will expose the

amplifier circuitry to the elements.

PROTECT YOUR HEARING!

We value you as a long-term customer. For

that reason, we urge you to practice restraint in

the operation of this product so as not to damage

your hearing and that of others in your vehicle.

Studies have shown that continuous exposure to

high sound pressure levels can lead to permanent

(irreparable) hearing loss. This and all other

high-power amplifiers are capable of producing

such high sound pressure levels when connected

to a speaker system. Please limit your continuous

exposure to high volume levels.

While driving, operate your audio system in

a manner that still allows you to hear necessary

noises to operate your vehicle safely (horns,

sirens, etc.).

SERIAL NUMBER

In the event that your amplifier requires

service or is ever stolen, you will need to have

a record of the product’s serial number. Please

take the time to enter that number in the space

provided below. The serial number can be found

on the bottom panel of the amplifier and on the

amplifier packaging.

Serial Number:

INSTALLATION APPLICATIONS

This amplifier is designed for operation in

vehicles with 12 volt, negative-ground electrical

systems. Use of this product in vehicles with

positive ground and/or voltages other than 12V

may result in damage to the product and will void

the warranty.

This product is not certified or approved for

use in aircraft.

Do not attempt to “bridge” the outputs of this

amplifier with the outputs of a second amplifier,

including an identical one.

PLANNING YOUR INSTALLATION

It is important that you take the time to read

this manual and that you plan out your

installation carefully. The following are some

considerations that you must take into account

when planning your installation.

Cooling Efficiency Considerations:

The outer shell of your JL Audio amplifier is

designed to remove heat from the amplifier

circuitry. For optimum cooling performance, this

outer shell should be exposed to as large a volume

of air as possible. Enclosing the amplifier in a

small, poorly ventilated chamber can lead to

excessive heat build-up and degraded

performance. If an installation calls for an

enclosure around the amplifier, we recommend

that this enclosure be ventilated with the aid

of a fan. In normal applications, fan-cooling

is not necessary.

Remote

Level

Mode

Turn-On

Mode

All | Sub Ch.

Input Mode

2 Ch. | 4 Ch. | 6 Ch.

Rem. | Oset | Signal

Input Voltage

Low | High

CH. 3

(L)CH. 4

(R)

CH. 1

(L)

CH. 1 & 2 CH. 3 & 4 SUB CH.

CH. 2

(R)

HP Filter Mode

Filter Freq. (Hz)

Input

Sens.

O | x1 | x10

Filter Mode

HP Filter Freq. (Hz)

Input

Sens.

O | BP | HP

LP Filter Mode

LP Filter Freq. (Hz)

Input

Sens.

O | 12dB | 24dB

Mono Subwoofer Output

(L)

(R)

CH. 1

CH. 2

CH. 3

CH. 4

SUB

INPUT SECTION

+12 VDC Ground Remote

5 Channel Amplifier with 2-Way / 3-Way Crossover

Status

LED

(pg. 11)

Ch. 1 & 2 Filter

Frequency

Selector

(pg. 8)

Ch. 1 & 2

Filter Mode

Selection

(pg. 8)

Ch. 1 & 2 Input

Sensitivity Control

(pg. 8)

Remote

Level Mode

Switch

(pg. 9)

Input

Mode

Switch

(pg. 7)

Input

Voltage

(pg. 7)

Ch. 3 & 4 Filter

Frequency

Selector

(pg. 8)

Ch. 3 & 4

Filter Mode

Selection

(pg. 8)

Ch. 3 & 4 Input

Sensitivity Control

(pg. 8)

Turn-On

Mode

(pg. 6)

Sub. Ch. Filter

Frequency

Selector

(pg. 8)

Sub. Ch.

Filter Mode

Selection

(pg. 8)

Sub. Ch. Input

Sensitivity Control

(pg. 8)

Remote Turn-On

Connector

(pg. 6)

Chassis Ground

Connector

(pg. 5)

Channels 1 & 2

Preamp Input Jacks

(pg. 7)

Subwoofer Ch.

Preamp Input Jacks

(pg. 7)

+12 V Power

Connector

(pg. 5)

Mono

Subwoofer Outputs

(pg. 10)

Channels 3 & 4

Speaker Outputs

(pg. 10)

Channels 1 & 2

Speaker Outputs

(pg. 10)

Jack for

Remote Level

Control Knob

(pg. 10)

Channels 3 & 4

Preamp Input Jacks

(pg. 7)

Produkt Specifikationer

Mærke:	JL Audio
Kategori:	Bil forstærker
Model:	5v2

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio 5v2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bil forstærker JL Audio Manualer

23 August 2024

22 August 2024

22 August 2024

22 August 2024

22 August 2024

22 August 2024

22 August 2024

21 August 2024

21 August 2024

21 August 2024

Bil forstærker Manualer

Nyeste Bil forstærker Manualer

Autotek TA1800 Manual

15 Januar 2025

Phoenix Gold SD1300.5 Manual

27 August 2024

Phoenix Gold Ti1500.1 Manual

27 August 2024

Phoenix Gold SD800.5 Manual

27 August 2024

Phoenix Gold Elite Manual

27 August 2024

Phoenix Gold Ti2500.1 Manual

27 August 2024

Phoenix Gold R250.1 Manual

27 August 2024

Phoenix Gold SD600.1 Manual

27 August 2024

Phoenix Gold The one Manual

27 August 2024

Phoenix Gold R500.1 Manual

27 August 2024