Klavis CalTrans Manual

Klavis Ikke kategoriseret CalTrans

Læs gratis den danske manual til Klavis CalTrans (19 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Klavis CalTrans, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/19
CalTrans
CalTrans
CalTrans
CalTrans CalTrans user manual V1.6 Page of 1 19
Ca
Ca
Ca
CaCal
l
l
llTra
Tra
Tra
TraTrans
ns
ns
nsns
V/Oct processor
Quad programmable Volt/Octave calibrator and transposer CV
Introduction
The CalTrans solves issues encountered when playing tonal music with a modular system:
tracking problems, curves unrelated to Volt per octave ratio, limited octave range, cumbersome
transpose, . The Caltrans corrects and expands the range of troublesome VCOs and brings V/Oct ..
tracking to anything that oscillates. Besides calibration, the CalTrans offers live play features.
Each channel can be quantized and any combination of them transposed jointly. VCOs whose
tracking doesn’t go high enough to follow the leader will see their pitch repositioned in their
highest possible octave so that the global harmony is unaffected. You can add a pinch of
portamento and glissando each channel and save the whole in user presets. to
CalTrans
CalTrans
CalTrans
CalTransCalTrans
Features at a glance
• Four V/Oct processing channels, each with individual :
o Curve correction and range expansion for a VCOny , VCF or
other oscillating circuit with a CV acting on pitch
o 1-for-1 V/Oct mode for use without target calibration
o Switchable semitone quantizer
o Adjustable portamento time
o Adjustable glissando time
• Dedicated semitone and octave transpose encoders
• Inputs cascading with zero added load for stable pitch control
• Four user presets storing transpose, portamento and glissando
• Storage of the calibration profile for each channel
• Maximum voltage range covering 10 octaves
• Presets, calibration and current state retained over power cycle
• Volt/Oct inputs factory-calibrated in flash memory
• User adjustable input scaling to correct voltage inaccuracies in your
sources
• Easy firmware update via a simple audio file
• High-quality push-encoders with metal shaft
• Skiff-friendly & compact module
New features described in this manual require firmware update 1.17
CalTrans
CalTrans
CalTrans
CalTrans CalTrans user manual V1.6 Page of 2 19
Installation and security
Purpose
This module is meant for installation in a Eurorack-compliant chassis.
It adheres to Eurorack Doepfer mechanical and electrical specifications.
Do not attempt using this module in other mechanical or electrical contexts.
Installation
Before the installation, disconnect the mains power supply from your modular system. Some
power supplies are not safely isolated; there is a risk of injury!
See in the specifications if this module requires 5V from the supply rails. If 5V is needed and your
rack is not providing 5V, do not attempt connection!
Check that the current consumption requirements of this module, when added to your installed
set of modules do not exceed the available current from your supply. This is done by adding up
the current draw of all modules (mA) separately for each of 5V, 12V and -12V rails. If any of these 3
sums exceeds the available current of your supply for that voltage, do not connect the module to
your system; you need a stronger power supply.
The provided supply flat cable can only be inserted in the appropriate orientation at the back of
the module, so there is no risk of error on that end. However, you should pay attention to the
orientation of the cable in the socket of the supply PCB inside your chassis. Cheap sockets
without shrouding may allow you to plug in the connector the wrong way!
The red stripe on the cable should match a stripe printed on the supply board. The stripe also
indicates the -12V side. In case there is no stripe, a -12V marking is a safe indication of the
orientation.
Double check that the connectors are fully inserted and correctly oriented before switching on
the power supply. In case of an anomaly, switch off the power supply immediately and check
everything again.

Produkt Specifikationer

Mærke: Klavis
Kategori: Ikke kategoriseret
Model: CalTrans

Har du brug for hjælp?

Hvis du har brug for hjælp til Klavis CalTrans stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Klavis Manualer

Klavis

Klavis ComPair Manual

2 Februar 2025
Klavis

Klavis Plus 1U Manual

30 Januar 2025
Klavis

Klavis Twin Waves MK II Manual

31 August 2024
Klavis

Klavis Flexshaper Manual

4 Juli 2024
Klavis

Klavis CalTrans Manual

4 Juli 2024
Klavis

Klavis Dual CV Manual

4 Juli 2024
Klavis

Klavis Twin Waves MKII Manual

4 Juli 2024
Klavis

Klavis Mixwitch Manual

4 Juli 2024
Klavis

Klavis Logica XT Manual

4 Juli 2024
Klavis

Klavis Quadigy Manual

4 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive

Playtive IAN 304923 Manual

16 Juni 2025
Playtive

Playtive IAN 115593 Manual

16 Juni 2025
Playtive

Playtive IAN 306075 Manual

16 Juni 2025
AmpliVox

AmpliVox Airvox SW690 Manual

16 Juni 2025
Playtive

Playtive HG06184 Manual

16 Juni 2025
Xblitz

Xblitz FX5 Exclusive Manual

16 Juni 2025
Playtive

Playtive IAN 279595 Manual

16 Juni 2025
Playtive

Playtive IAN 285626 Manual

16 Juni 2025
Playtive

Playtive IAN 322785 Manual

16 Juni 2025
Hinkley Lighting

Hinkley Lighting Moore 46412HB Manual

16 Juni 2025