Klavis Quadigy Manual


Læs gratis den danske manual til Klavis Quadigy (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Klavis Quadigy, eller vil du spørge andre brugere om produktet?

Side 1/15
Quadigy
Quadigy
Quadigy
Quadigy Quadigy user manual V1.2 Page of 1 15
Qu
Qu
Qu
QuQuad
ad
ad
adadi
i
i
iigy
gy
gy
gygy Quad Envelope Generator
7-stage envelopes, presets, cycling, morphing & CV matrix
Introduction
The Quadigy is a complex envelope generator focused on live . The goal is to allow the user play
setting up rich, interactive and dynamically evolving envelopes without the risk of breaking up a
subtle and intricate once on stage. This is achieved by oering two main modes, one where patch
full control is , and a Live mode where only the settings that are sensible using on stage available
are accessible. The user interface oers an intuitive access for otherwise complex settings.
Advanced features such as automatic time-stretching, multiphase clocking and full morphing put
the Quadigy in a category on its own.
Quadigy
Quadigy
Quadigy
QuadigyQuadigy
Features at a glance
Quad 7-stage envelopes
o Pre-delay
o Hold
o Attack
o Punch
o Decay
o Sustain
o Release
Continuous curve shape setting
Inversion
Independent output level
Cycle capability with auto t- -clock to
o Elastic time stretching
o 5 internal clocks with tap tempo
o External clock control
o Multiply/divide and oset
o Individual cycle ext. control
Manual gating for convenient editing
32 presets with naming
External preset control via CV Trig or
Simultaneous 156-point CV matrix
Morphing on presets and CV Matrix
Multi-editing for polyphonic uses
Live mode for easier/safer control
Graphical display
Real-time envelope stages LED indication
Current state retained over power cycle
Easy rmware update via an audio le
Ski-friendly and compact module
Quadigy
Quadigy
Quadigy
Quadigy Quadigy user manual V1.2 Page of 2 15
Installation and security
Purpose
This module is meant for installation in a Eurorack-compliant chassis.
It adheres to Eurorack Doepfer mechanical and electrical specications.
Do not attempt using this module in other mechanical or electrical contexts.
Installation
Before the installation, disconnect the mains power supply from your modular system. Some
power supplies are not safely isolated; there is a risk of injury!
See in the specications if this module requires 5V from the supply rails. If 5V is needed and your
rack is not providing 5V, do not attempt connection!
Check that the current consumption requirements of this module, when added to your installed
set of modules do not exceed the available current from your supply. This is done by adding up
the current draw of all modules (mA) separately for each of 5V, 12V and -12V rails. If any of these 3
sums exceeds the available current of your supply for that voltage, do not connect the module to
your system; you need a stronger power supply.
The provided supply at cable can only be inserted in the appropriate orientation at the back of
the module, so there is no risk of error on that end. However, you should pay attention to the
orientation of the cable in the socket of the supply PCB inside your chassis. Cheap sockets
without shrouding may allow you to plug in the connector the wrong way!
The red stripe on the cable should match a stripe printed on the supply board. The stripe also
indicates the -12V side. In case there is no stripe, a -12V marking is a safe indication of the
orientation.
Double check that the connectors are fully inserted and correctly oriented before switching on
the power supply. In case of an anomaly, switch o the power supply immediately and check
everything again.


Produkt Specifikationer

Mærke: Klavis
Kategori: Ikke kategoriseret
Model: Quadigy

Har du brug for hjælp?

Hvis du har brug for hjælp til Klavis Quadigy stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Klavis Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet

Planet IHD-420PT Manual

17 August 2025
Vulcan

Vulcan VBB1BF Manual

17 August 2025
Noyafa

Noyafa NF-981 Manual

17 August 2025
MSW

MSW -WOOHS-7HP Manual

17 August 2025
MSW

MSW -PCPAIR 400 Manual

17 August 2025
Graef

Graef HM 508 Manual

17 August 2025
MSW

MSW -HFCV-40 Manual

17 August 2025
Guede

Guede GRD 300.1/R Manual

17 August 2025
MSW

MSW -CRF30-BT Manual

17 August 2025