Klavis Dual CV Manual


Læs gratis den danske manual til Klavis Dual CV (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Klavis Dual CV, eller vil du spørge andre brugere om produktet?

Side 1/5
Tw
Tw
Tw
TwTweakers
eakers
eakers
eakerseakers user manual V1.0 Page of 1 5
Tweakers
Dual CV processor
Overview
The Tweakers is a slim companion module that allows fine tuning your modulations. Two
channels offer control over gain and offset. A three-position switch allows muting the channel
and inverting the modulation polarity without impacting the offset. Normalizing of the inputs
avoids using a multiple when a signal is dispatched to two targets. Normalizing of the outputs
offers an extra mixer, summing the two channels. The Tweakers is a perfect companion for
modules whose modulation inputs lack such amenities. Activating predefined settings at the flick
of a switch is paramount for live situations. Being able to prepare two sets of carefully adjusted
settings for a given signal is even more useful. It may come handy as an audio mixer too.
Features
Two independent channels also useable jointly as a mixer or splitter
In each channel:
o Input and output jack
o Gain pot with up to 2.1 amplification
o Bipolar offset pot
o 3-position switch:
Inverted polarity
Channel off
Normal polarity
Offset setting is independent of the polarity switch
Normalized input A can distribute the signal in both channels
Normalized outputs can mix the two channels on out B
Compact module
Tw
Tw
Tw
TwTweakers
eakers
eakers
eakerseakers user manual V1.0 Page of 2 5
Installation and security
Purpose
This module is meant for installation in a Eurorack-compliant chassis.
It adheres to Doepfer Eurorack mechanical and electrical specifications.
Do not attempt using this module in other mechanical or electrical contexts.
Installation
Before the installation, disconnect the mains power supply from your modular system.
Some power supplies are not safely isolated; there is a risk of injury!
See in the specifications if this module requires 5V from the supply rails. If 5V is needed and your
rack is not providing 5V, do not attempt connection!
Check that the current consumption requirements of this module, when added to your installed
set of modules do not exceed the available current from your supply. This is done by adding up
the current draw of all modules (mA) separately for each of 5V, 12V and -12V rails. If any of these 3
sums exceeds the available current of your supply for that voltage, do not connect the module to
your system; you need a stronger power supply.
The provided supply flat cable can only be inserted in the appropriate orientation at the back of
the module, so there is no risk of error on that end. However, you should pay attention to the
orientation of the cable in the socket of the supply PCB inside your chassis. Cheap sockets
without shrouding may allow you to plug in the connector the wrong way!
The red stripe on the cable should match a stripe printed on the supply board. The stripe also
indicates the -12V side. In case there is no stripe, a -12V marking is a safe indication of the
orientation.
Double check that the connectors are fully inserted and correctly oriented before switching on
the power supply. In case of an anomaly, switch off the power supply immediately and check
everything again.


Produkt Specifikationer

Mærke: Klavis
Kategori: Ikke kategoriseret
Model: Dual CV

Har du brug for hjælp?

Hvis du har brug for hjælp til Klavis Dual CV stil et spørgsmål nedenfor, og andre brugere vil svare dig