Kramer KDS-USB2 Manual

Kramer AV forlænger KDS-USB2

Læs gratis den danske manual til Kramer KDS-USB2 (2 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Kramer KDS-USB2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

KDS-USB2 Quick Start

P/N:

2 9 0 0 - 3 0 1 3 9 1 QS

Rev:

Scan for full manual

KDS-USB2 Kit/KDS-USB2- /KDS-USB2-DEC EN

Quick Start Guide

This guide helps you install and use your KDS-USB2 for the first time.

Go to www.kramerav.com/downloads/KDS-USB2 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check in the bwhat’s ox

KDS KDS-USB2-EN and/or -USB2-DEC

1 Power adapter and cord (for ) KDS-USB2-DEC

1 Quick start guide

1 USB2 cable A male to B male (for ) KDS-USB2-EN

Step 2: Get to know your KDS-USB2

KDS-USB2-EN

Feature

Function

Power LED

Lights blue when power is supplied by USB connection. KDS-USB2-DEC

Link LED

Lights green when a USB link is established between the encoder and the decoder.

Flashes slowly when the unit attempts to establish a link. Flashes quickly when in pairing mode.

O when a link is not established.

Host LED

Lights green when is properly enumerated on the host computer. KDS-USB2

Flashes when in suspended state. a

Activity LED

Lights yellow when activity between the decoder and encoder/s is detected.

O when in suspended mode.

Cong Button

For factory use.

Mode Button

Use for with the decoder/ pairing KDS-USB2-EN KDS-USB2-DEC s.

USB Host Port

Connect to the host computer.

Link RJ-45 Connector

Connect to the . KDS-USB2-DEC

KDS-USB2-DEC

Feature

Function

USB Ports

Connect up to 4 USB type A devices.

Power LED

Lights blue when 24 V power is supplied.

Link LED

Lights green when a USB link is established between the encoder and the decoder.

Flashes slowly when the unit attempts to establish a link. Flashes quickly when in pairing mode.

O when a link is not established.

# Feature Function

Host LED

Lights green when is properly enumerated on the host computer. Flashes when in a KDS-USB2

suspended state.

Activity LED

Lights yellow when activity between the decoder and encoder/s is detected. O when in

suspended mode.

24V Power Connector

Connect to the supplied power adapter.

Cong Button

For factory use.

Mode Button

Use for pairing with the decoder/s. KDS-USB2-EN KDS-USB2-DEC

Link RJ-45 Connector

Connect to the . KDS-USB2-EN

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your .

KDS-USB2

• Ensure that the environment (e.g., maximum ambient temperature & air ow) is compatible for the device.

• Avoid uneven mechanical loading.

• Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.

• Reliable earthing of rack-mounted equipment should be maintained.

• Maximum mounting height for the device is 2 meters.

• The encoder is powered by the USB host port only.

• You can also connect multiple units.

KDS-USB2-EN and KDS-USB2-DEC

For optimal performance, use the recommended Kramer cables available at www.kramerav.com/product/KDS-USB2.

Using third-party cables may cause damage!

Step 4: Connect power

Connect the power cord to and plug it into the mains electricity.

KDS-USB2

Safety Instructions (See for updated safety information)www.kramerav.com

Caution:

• For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.

• There are no operator serviceable parts inside the unit.

Warning:

• Use only the power cord that is supplied with the unit.

• Disconnect the power and unplug the unit from the wall before installing.

Step 5: Operate KDS-USB2

By default, the kit devices are paired. You can also pair devices manually or map multiple devices via Kramer

KDS-USB2

Control.

When using unpaired units (for example, individually

purchased devices), you can pair them manually.

To pair -USB2- with -USB2-DEC manually: KDS EN KDS

1. Make sure that the devices are properly connected.