Kramer MTX3-88-PR-PRO Manual

Kramer bryter MTX3-88-PR-PRO

Læs gratis den danske manual til Kramer MTX3-88-PR-PRO (6 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Kramer MTX3-88-PR-PRO, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

MTX3- -PR-88 PRO Quick Start

Manufacturer

: Kramer Israel

Negev St. Airport City 7019900

+972 (0)73

- - 265 0200

info_il

@kramerav.com

Importer:

Kramer EMEA Netherlands

Stroombaan 16

, The Garden 1181VX

Amstelveen

info_EMEA

@kramerav.com

P/N:

2900- 301661QS

Rev:

Scan to go to website

MTX3 PRO- - -88 PR Quick Start Guide

This guide helps you install and use your MTX3 PR- -88 -PRO for the first time.

Go to www.kramerav.com/downloads/MTX3-88- -PR PRO to download the latest user manual and check if

firmware upgrades are available.

Step 1: Check what’s in the box

MTX3- -PR- - -88 PRO 8x8 All in one Matrix

1 S et of rack ears

4 Rubber feet

1 multi-signal USB-C cable (1m)

2 Antennas

2 Power cords

1 Quick start guide

2 Fuses

Step 2: -Get to know your MTX3 88-PR- PRO

or countries outside the US and EU, a special power cable must be ordered separately.

Use the embedded webpages to configure which HDBT ports are transmitters, and which are receivers. For detailed

instructions, refer to the User Manual.MTX3- - -88 PR PRO

Feature

Function

LED (behind the Kamer logo)

LED Device &

Networking Status

Indicates

Screen Displayed Text (12)

Dark

Power Off

Lights red

Powering On

Restart

Lights white

Power On

Active

FW background

download

Firmware download

No IP address

acquired

No active IP address

A network has been

detected and has a

valid IP address

IP address acquired

Feature

Function

A device identification

command was sent

(Flag me)

Flag me is activated

Flashes white

Standby

Power-save stand-by

IP fallback address /

Network Issue

Fallback IP address is active; or

network issue.

INPUT SELECT Buttons (1 to 8)

When pressed immediately after pressing an output, causes the AV signal to

route the selected input to the selected output.

When pressed independently – informs the user of the routing of this input by

lighting the destination output button.

OUTPUT SELECT Buttons (1 to 8)

Press to select an output to which the input is routed.

ALL Button

Press followed by an input button to connect the selected input to all outputs. For

example, press ALL and then press IN 2: Input 2 is routed to all outputs.

OFF Button

Press after pressing an output button to turn off the selected output .

To turn off all the outputs, press ALL followed by OFF.

BLANK Button

Press after pressing an OUT button (1~ 8) to toggle blanking for that output. The

BLANK button lights if the output corresponding to the pressed OUT button is -

blanked.

FREEZE Button

Press after pressing an OUT button (1 8) to toggle freezing that output. The -

FREEZE button lights if the output corresponding to the pressed output button is

frozen.

RECALL Button

Press the RECALL button followed by pressing an OUT button (1 8) to recall the -

settings saved in the memory denoted by the OUT button number.

STORE Button

Press the STORE button followed by pressing an OUT button (1 8) to store the -

settings. The current status (routing, audio and video settings, USB status and

more) are saved in the memory denoted by the OUT button number.

PANEL LOCK Button

Press and hold to toggle the locking/releas of the front panel buttons.ing

RESET To 1080P Button

Press and hold button for about 3 seconds to set the resolution on all outputs to

1080p.

LCD Display

Shows the connection and device status.

VOLUME

Name

Function

MIC Knob

Turn clockwise/counterclockwise to

increase/decrease the volume of all microphone

inputs. Press to toggle muting/unmuting the

microphones.

When MUTED, the MIC LED lights red.

MIC LED

Lit when the mic is muted

OUTPUT Knob

Turn clockwise/counterclockwise to

increase/decrease the volume of all outputs.

Includes analog and Dante but does not affect

HDMI/HDBT outputs.

Press to toggle muting/unmuting the audio

outputs.

When MUTED, the OUTPUT LED lights red.

OUTPUT LED

Lit when the output is muted.

Produkt Specifikationer

Mærke:	Kramer
Kategori:	bryter
Model:	MTX3-88-PR-PRO

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer MTX3-88-PR-PRO stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

bryter Kramer Manualer

Kramer MTX3-88-PR-PRO Manual

27 August 2025

Kramer SWT3-21-HU-TR Manual

26 August 2025

Kramer MTX3-88-SE Manual

17 August 2025

Kramer KIT-400 Manual

23 Juli 2025

Kramer SWT3-31-HU-TR Manual

22 Juli 2025

Kramer VP-427X Manual

21 Juli 2025

Kramer VS-88DT Manual

21 Juli 2025

Kramer SWT3-21-H Manual

21 Juli 2025

Kramer VP-438 Manual

21 Juli 2025

Kramer VP-440 Manual

21 Juli 2025

bryter Manualer

Nyeste bryter Manualer

D-Link DMS-1250-28P Manual

25 August 2025

D-Link DMS-1250-18P Manual

25 August 2025

D-Link DMS-1250-28 Manual

25 August 2025

ORNO OR-AE-13265 Manual

24 August 2025

ORNO OR-AE-13269 Manual

24 August 2025

ORNO OR-AE-13263 Manual

24 August 2025

ORNO OR-PRE-433 Manual

23 August 2025

Netgear GSM4212P Manual

23 August 2025

Digitus DS-72220-1FR Manual

23 August 2025

Netgear GSM4248UX Manual

23 August 2025