Kramer VS-88DT Manual

Kramer bryter VS-88DT

Læs gratis den danske manual til Kramer VS-88DT (62 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Kramer VS-88DT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/62

P/N: 2900-300275 Rev 6 www.kramerAV.com

USER MANUAL

MODEL:

VS-88DT

HDMI/HDBT Matrix Switcher

Kramer Electronics Ltd. 
 
VS-88DT – Contents 
i 
 
Contents 
Introduction  1 
Getting Started  2 
Achieving the Best Performance  2 
Safety Instructions  2 
Using TP cables  2 
Recycling Kramer Products  3 
Overview  4 
About HDBaseT™ Technology  5 
Defining the VS-88DT HDMI/HDBT Matrix Switcher  6 
Installing the VS-88DT in a Rack  8 
Connecting the VS-88DT  9 
Connecting a Serial Controller to the VS-88DT  10 
Connecting to the VS-88DT via Ethernet  10 
Operating the VS-88DT  13 
Switching Inputs to Outputs  13 
Storing and Recalling Preset Configurations  14 
Acquiring an EDID  14 
Cancelling One or All Outputs  14 
Resetting the Device to Factory Default Configuration  15 
Locking and Unlocking the Front Panel  15 
RS-232 Data Routing over HDBaseT  16 
Configuring the VS-88DT  17 
Using the Menu  17 
Selecting the HDBaseT or HDMI Outputs  19 
Selecting DHCP  19 
Configuring the IP Network Address  19 
Resetting the VS-88DT to Factory Default Configuration  20 
Operating the VS-88DT Remotely Using the Web Pages  21 
Switching Page  21 
Device Settings Page  24 
Authentication Page  25 
RS-232 Routing Page  26 
EDID Page  27 
About Page  27 
Wiring the DGKat TP RJ-45 Connectors  28 
Updating the Firmware  29 
Technical Specifications  30 
Default Parameters  31 
Default Communication Parameters  31 
Kramer Protocol  32 
Kramer Protocol 3000 Syntax  32 
Kramer Protocol 3000 Commands  34 