Kramer PT-101H2 Manual


Læs gratis den danske manual til Kramer PT-101H2 (2 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Kramer PT-101H2, eller vil du spørge andre brugere om produktet?

Side 1/2
PT-101H2 Quick Start
P/N:
2 9 0 0 - 3 0 1 2 7 7 QS
Rev:
2
Scan for full manual
PT- Quick Start Guide 101H2
This guide helps you install and use your PT-101H2 for the first time.
Go to www.kramerav.com/downloads/PT-101H2 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check in the bwhat’s ox
PT-101H2 4K HDMI 2.0 Repeater
1 Bracket set
1 Quick start guide
1 Power supply (5V DC)
4 Rubber feet
Step 2: Get to know your -101H2 PT
#
Feature
Function
1
OUTPUT HDMI Connector
Connect to a 4K HDMI acceptor, (for example, a smart TV)
2
ON LED
Lights blue when power is connected.
Lights red when only the HDMI input signal is present.
Lights purple when the power and HDMI signal are connected
3
INPUT HDMI Connector
Connect to a 4K HDMI source, (for example, a PC)
4
5V DC Connector
Connect to the supplied power adapter
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Step 3: Mount -101H2 PT
Install using one of the following methods: PT-101H2
Attach the rubber feet and place the unit on a flat surface.
Fasten a bracket (included) on each side of the unit and attach it to a flat surface
(see www.kramerav.com/downloads/PT-101H2).
Mount the unit in a rack using the recommended rack adapter (see www.kramerav.com/product/PT-101H2).
Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
Avoid uneven mechanical loading.
Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.
Reliable earthing of rack-mounted equipment should be maintained.
Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your . PT-101H2
To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/PT-101H2.
Using third-party cables may cause damage!
Step 5: Connect power
Connect the power cord to and plug it into the mains electricity. PT-101H2
Safety Instructions (See www.kramerav.com for updated safety information)
Caution:
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the
terminal or in the User Manual.
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Disconnect the power and unplug the unit from the wall before installing.


Produkt Specifikationer

Mærke: Kramer
Kategori: AV forlænger
Model: PT-101H2

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer PT-101H2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




AV forlænger Kramer Manualer

Kramer

Kramer EXT3-U3-T Manual

20 Januar 2025
Kramer

Kramer VP-427X2 Manual

19 December 2024
Kramer

Kramer TP-594Rxr Manual

19 December 2024
Kramer

Kramer TP-752R Manual

19 December 2024
Kramer

Kramer TP-780T Manual

19 December 2024
Kramer

Kramer TP-594Txr Manual

19 December 2024
Kramer

Kramer TP-752T Manual

19 December 2024
Kramer

Kramer TP-583Txr Manual

19 December 2024
Kramer

Kramer W-3H2 Manual

19 December 2024
Kramer

Kramer WP-872xr Manual

19 December 2024

AV forlænger Manualer

Nyeste AV forlænger Manualer