Contents
Introduction 1
Getting Started 2
Overview 4
Mounting VS-3232DN-EM 11
Connecting the VS-3232DN-EM 12
Port Numbering 14
Connecting to the VS-3232DN-EM via RS-232 15
Connecting to the VS-3232DN-EM via USB (VCOM) 15
Connecting to the VS-3232DN-EM via Ethernet 16
Operating Your Video Matrix Switcher 19
Startup Display 19
Using the Selector Buttons 20
Confirming Actions 20
Switching Actions 21
Locking the Front Panel Buttons 23
Using the Configuration Menus 24
Using the Setup Menu 24
Using the Config Menu 28
Configuring the Number of Installed Input and Output Ports 35
Using the Test Video Card 36
Defining the Test Video Card 36
Setting the Resolution of the Generated Video 36
Setting the Pattern of the Generated Video 37
Installing the Test Module 37
Using the Input / Output Cards 39
Defining the UHD-IN4-F32 / UHD-OUT4-F32 39
Defining the UHDA-IN4-F32 / UHDA-OUT4-F32 40
Defining the DT-IN4-F32 / DT-OUT4-F32 43
Defining the DTAxr-IN4-F32 / DTAxr-OUT4-F32 44
Defining the HDBT-IN4-F32 / HDBT-OUT4-F32 47
Defining the H-IN4-F32 / H-OUT4-F32 50
Defining the HAD-IN4-F32 / HAD-OUT4-F32 51
Defining the HAA-IN4-F32 / HAA-OUT4-F32 53
Defining the HDCP-IN4-F32 / HDCP-OUT4-F32 55
Defining the DGKat-IN4-F32 / DGKat-OUT4-F32 56
Defining the F670-IN4-F32 / F670-OUT4-F32 58
Defining the F610-IN4-F32 / F610-OUT4-F32 59
Defining the DVI-IN4-F32 / DVI-OUT4-F32 60
Defining the DL-IN2-F32 / DL-OUT2-F32 61
Defining the SDIA-IN4-F32 62
Defining the VGAA-IN4-F32 / VGAA-OUT4-F32 64
Defining the AAD-IN4-F32 / AAD-OUT4-F32 67
Using the Test Module to Troubleshoot Video Problems 69
Testing the Projector Output 69
Testing the Output Signal Path to the Projector 70
Testing the Input and Output Signal Path to the Projector 70
Input / Output Card Hardware Installation Instructions 71
Installing a PS-1DN Power Supply 73
Upgrading the VS-3232DN-EM Firmware 74
Upgrading Firmware Using K-Upload 74
Upgrading Firmware Using Kramer Network 75
Technical Specifications 76
VS-3232DN-EM Chassis 76
Quick VS-3232DN-EM Card Comparison 76
Default Settings 79
Default Communication Parameters 79
Factory Default EDID 79
