Lowell ACS-2014-2C-HW Manual

Lowell Ikke kategoriseret ACS-2014-2C-HW

Læs gratis den danske manual til Lowell ACS-2014-2C-HW (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Lowell ACS-2014-2C-HW, eller vil du spørge andre brugere om produktet?

Side 1/3
INTERNAL USE ONLY: PN 24223
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2023 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069, USA / tel. 800.325.9660 / tel. 636-257-3400 / www.lowellmfg.com
Spec 1000
Model ACS-2014-2C-HW | Rev. 12.20.23 | pg. 1/3
POWER RATING: 120VAC, 60Hz, 20A (each circuit)
CHASSIS: 30 x 2” x 2”H heavy gauge steel chassis with black powder epoxy finish
TERMINATION: Hardwired non-metallic flexible conduit with pigtail leads rotates in any
direction. The 6 ft. conduit can be trimmed in the field if needed.
CIRCUITS & RECEPTACLES:
Circuit 1 powers three NEMA 5-20R duplex receptacles
Circuit 2 powers eight NEMA 5-15R single receptacles
UNIVERSAL MOUNTING BRACKETS: The universal brackets allow for power strip instal-
lation in a variety of applications with receptacles facing front, center or rear. Brackets are
engineered with multiple mounting points and include two types of hardware to facilitate
easy installation in a rack with adjustable or fixed rails, to a wall, or under a desk/counter.
The brackets can be mounted so they are exposed for easy access or concealed beneath
the power strip for an aesthetically cleaner installation.
CERTIFICATION: ETL Listed in U.S./Canada
ORIGIN: Assembled in U.S.A. with global components
Two-circuit power strip with 14 NEMA receptacles and a non-metallic exible whip with pigtail
leads, is ideal for installations where some equipment has higher power demands than other
equipment.
ACS Series Model No.
ACS-2014-2C-HW
AC Power Strip w/Two Circuits
FEATURES
Certied
US Steel
S
t
r
o
n
g
e
r
.
G
r
e
e
n
e
r
.
B
e
t
t
e
r
.
Assembled
In USA
with Global
Components
A&E SPECIFICATIONS
The two-circuit power strip shall be Lowell model ACS-2014-2C-HW, which shall have a
power rating of 120VAC 60Hz 20A and feature three (3) NEMA 5-20R duplex receptacles
on one circuit and eight (8) NEMA 5-15R single receptacles on the other circuit. Termination
shall be via a 6 ft. non-metallic flexible conduit with pigtail leads. The power strip shall be
made in the U.S.A. with global components, and include universal mounting brackets and
hardware.
Non-metallic exible
conduit rotates in any
direction.
CIRCUIT 2:
Eight single ( NEMA 15A )
CIRCUIT 1:
Three duplex ( NEMA 20A )
Mounting brackets
INTERNAL USE ONLY: PN 24223
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2023 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069, USA / tel. 800.325.9660 / tel. 636-257-3400 / www.lowellmfg.com
Spec 1000
Model ACS-2014-2C-HW | Rev. 12.20.23 | pg. 2/3
3) REATTACH CONNECTOR:
Twist/push the connector to attach it to
the shortened conduit.
1) REMOVE EXCESS LENGTH:
Snip reinforcing rib at desired length.
Bend the conduit to expose the cut and
carefully cut around the conduit without
cutting the wires inside. Remove excess
length.
2) REMOVE CONNECTOR:
Carefully snip the last rib(s) to loosen the
connector from the excess length, then
twist/pull to remove it.
UNIVERSAL MOUNTING BRACKETS: The brackets can be mounted exposed for easy access or concealed for a cleaner install. Includes
variety of hardware for versatile installation.
HOW TO TRIM THE CONDUIT: The 6 ft. non-metallic flexible conduit can be trimmed in the field.
(2) 1/4"-20 x 1/2" screws
(2) at nuts
(2) 10-32 x 1/2" screws
(2) cage nuts
(2) Brackets
RACK w/ ADJUSTABLE RAILS
(side mount : Mount to horizontal side )
supports with universal brackets, 1/4"-20
screws, flat nuts.
RACK w/ ADJUSTABLE RAILS
(rear mount): Mount to rear rail with univer-
sal brackets, 10-32 screws.
RACK w/ FIXED POSITION RAILS
(and rear Z-angle bracket): Mount to Z-an-
gle with universal brackets, 10-32 screws,
cage nuts.


Produkt Specifikationer

Mærke: Lowell
Kategori: Ikke kategoriseret
Model: ACS-2014-2C-HW

Har du brug for hjælp?

Hvis du har brug for hjælp til Lowell ACS-2014-2C-HW stil et spørgsmål nedenfor, og andre brugere vil svare dig