Lowell ACS-2012 Manual

Lowell Ikke kategoriseret ACS-2012

Læs nedenfor 📖 manual på dansk for Lowell ACS-2012 (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 15 personer og blev bedømt med 4.7 stjerner i gennemsnit af 8 brugere

Download PDF

Side 1/3

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1728

Model ACS-2012 Rev. 05-05-21 | pg. 1/3

INTERNAL USE ONLY: PN 24222

Power strip features a total of twelve 15A and 20A NEMA receptacles in a low

prole chassis. It includes surge suppression with LED status indicator.

FEATURES:

• Power Rating: 120VAC, 60Hz, 20A

• Chassis: 32" x 1.625" x 1.375" steel chassis with black powder epoxy

finish

• Termination: 12-ft. attached (non-removable) power cord with NEMA 5-20P

molded plug

• Receptacles: (12 total)

– Eight (8) single NEMA 5-15R receptacles

– Four (4) single NEMA 5-20R receptacles

• Surge Suppession: Common mode transient voltage surge suppression

(UL 1449-3 Listed) with 20A circuit breaker:

– LED indicator: Llit when protection is active

– Maximum surge current: 6500A (L-G, L-N, N-G)

– Maximum surge voltage: 6000V

– Suppressed voltage rating: 400V

– Energy dissipation: 450 Joules (8 x 20us waveform)

– Lines protected: L-G, L-N, N-G

– Response time: Less than one (1) nanosecond

– Noise ltering: EMI / RFI

• Mounting Hardware: Clips and screws are provided for vertical installation

in a rack that has adjustable or xed rails. Includes cable ties to secure

power supplies when the strip is mounted vertically.

• Certication: UL Listed

• Origin: China

• A&E Specications: The UL Listed power strip shall be Lowell model ACS-

2012, whhich shall have a power rating of 120VAC, 60Hz, 20A and include a

circuit breaker. It shall feature twelve NEMA receptacles (eight 15A and four

20A). It shall include common mode transient voltage surge suppression

with an LED indicator that is lit when protection is active. The power strip

shall have a suppressed voltage rating of 400V with maximum surge voltage

of 6000V and maximum surge current of 6500A. It shall be terminated with

an attached 12-foot cord and molded plug. The power strip shall include a

mounting clip, screw, and cable ties.

AC Power Strip w/Surge Suppression: ACS-2012

Attached power cord

with plug

Receptacles

are spaced to

accept some

power supplies

20A circuit breaker

LED indicator

is lit when

protection is

active

Mounting hardware

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1728

Model ACS-2012 Rev. 05-05-21 | pg. 2/3

INTERNAL USE ONLY: PN 24222

1. Install mounting clip to

Z-bracket using hardware

provided.

2. Align power strip with

mounting clips and snap

into place.

Z-bracket in rear

1. Install mounting clip to rack

rail mounting channel using