Lowell ACS-2020-IG-10C-HW Manual

Lowell Ikke kategoriseret ACS-2020-IG-10C-HW

Læs gratis den danske manual til Lowell ACS-2020-IG-10C-HW (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Lowell ACS-2020-IG-10C-HW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

INTERNAL USE ONLY: PN 24232

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1834

Model ACS-2020-IG-10C-HW | Rev. 12.20.23 | pg. 1/3

POWER RATING: 120VAC, 60Hz, 20A (each circuit)

CHASSIS: 60” x 2” x 2” steel chassis with black powder epoxy finish

TERMINATION: Hardwired 6 ft. non-metallic flexible conduit (whip) rotates in any direction.

It can be trimmed in the field if needed.

CIRCUITS & RECEPTACLES: A total of 20 insulated ground (isolated ground, I.G.) recep-

tacles (10 duplex) are wired into 10 independent cicuits.

• Each circuit powers one (1) NEMA 5-20R I.G. duplex receptacle

• Connections are made via numbered pigtail leads.

UNIVERSAL MOUNTING BRACKETS: The universal brackets allow for power strip instal-

lation in a variety of applications with receptacles facing front, center or rear. Brackets are

engineered with multiple mounting points and include two types of hardware to facilitate

easy installation in a rack with adjustable or fixed rails, to a wall, or under a desk/counter.

The brackets can be mounted so they are exposed for easy access or concealed beneath

the power strip for an aesthetically cleaner installation.

CERTIFICATION: ETL Listed in U.S./Canada

ORIGIN: Assembled in U.S.A. with U.S. steel chassis and global components

Ten-circuit power strip with twenty NEMA 20A insulated ground receptacles (10 duplex), for

installations requiring multiple AC power circuits, includes universal mounting brackets with

hardware.

ACS Series Model No.

ACS-2020-IG-10C-HW

AC Power Strip w/Ten Circuits

FEATURES

Certied

US Steel

Assembled

In USA

with Global

Components

A&E SPECIFICATIONS

The 20A power strip with 10 independent circuits shall be Lowell model ACS-2020-IG-10C-

HW. It shall feature 20 isolated ground (I.G.) NEMA 5-20R receptacles (10 duplex). The pow-

er strip shall terminate via a six-foot non-metallic flexible conduit with a rotating connector

and pigtail leads tagged for circuits 1-10. The power strip chassis shall measure 60” x 2”

x 2” and shall be steel with black powder epoxy finish. It shall include universal mounting

brackets. The power strip shall be made in the U.S.A. with global components.

CIRCUIT 1:

One NEMA 20A I.G.

duplex receptacle

(behind conduit)

Non-metallic exible

conduit rotates in any

direction.

CIRCUIT 2:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 3:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 4:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 5:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 7:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 9:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 6:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 8:

One NEMA 20A I.G.

duplex receptacle

CIRCUIT 10:

One NEMA 20A I.G.

duplex receptacle Mounting

brackets

Pigtail leads are

tagged according

to circuit for easy

identication.

INTERNAL USE ONLY: PN 24232

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.