LumenRadio MoonLite Manual

LumenRadio Controller MoonLite

Læs gratis den danske manual til LumenRadio MoonLite (4 sider) i kategorien Controller. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 14 anmeldelser. Har du et spørgsmål om LumenRadio MoonLite, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

MoonLite

INTRODUCTION

Thank you for buying a LumenRadio CRMX MoonLite product. This guide is intended to give you a quick

start to experience the benets of LumenRadio’s CRMX system.

The CRMX product you just purchased are designed to give you the highest reliability on the market

and are fully compatible with other CRMX products in entertainment lighting (CRMX Nova,

CRMX Outdoor, CRMX Slim, CRMX OEM). Through this you are able to expand

your wireless system with units from our other product lines as well as

with those of our partners. For the latest updates please visit

the LumenRadio website www.lumenradio.com.

The information furnished in this start guide is for informational use only and is subject to change without notice. Please

check www.lumenradio.com for latest version. LumenRadio AB assumes no responsibility or liability for any errors or

inaccuracies that may appear in this start guide.

All information and graphics are property of LumenRadio AB, Svangatan 2B, SE-416 68 Gothenburg, Sweden.

lumenradio

Creating Connectivity for a Better Tomorrow

Right green >80%

Mid green >60%

Left green >40%

Amber >20%

Red <20%

Link button - press

to link with, or unlink

from, another unit.

LED indicators - Mode, Status, Data

(See specications below)

We hope that you will enjoy

our products and that they

will bring benets and positive

experiences.

Mode (M)

BLE on (TX mode)

BLE on (RX mode)

RX mode

TX mode

RX mode

TX mode

Linked and synced

Transmitting

Linking or linked but not synced

Linking

color of ST = universe color selected by user

(green by default)

Not linked

DMX present

RDM, no DMX

RDM, with DMX

No DMX

when D = green, level bar displays battery level

when D = amber, level bar displays signal quality

Level indicators

- Signal quality and battery level

(See specications below)

CRMX MOONLITE CONTROL PANEL

See the operation section for details on how to link and unlink CRMX MoonLite units.

Indicators turn off after 30 sec inactivity when running on battery, press the button to wake up.

Status (ST) Data (D)

Level indicators

LINKING

MoonLite can link with any other LumenRadio CRMX unit.

POWER ON/OFF

Power on the device by pressing and holding its link button for 5 seconds until the LEDs lights up.

Power off the device by pressing and holding its link button for 5 seconds until the LEDs turn off.

FLEX MODE CHANGING

MoonLite offers the ultimate exibility to operate as either a transmitter or a receiver. (RX by default)

The Mode LED indicator shows different colors depending on the units current conguration

Mode LED displays yellow: Receiver mode selected

Mode LED displays red: Transmitter mode selected

The mode can be changed in the CRMX Toolbox app. You can also switch mode by using a manual button

press sequence (see below).

MANUAL CHANGE OF MODE

1. If LEDs are off – press the link button once to wake up the device.

2. Press and release the link button ve times in succession, then immediately press and hold the button

for three seconds (until ST LED is lit).

3. You can now change the Flex mode as desired. The mode LED will indicate the selected mode by

blinking in the modes corresponding color (red/yellow).

• To step between Flex modes: Press and release the link button to move to the next mode.

• To save changes: Press and hold the link button for three seconds. The unit will revert to normal oper-

ation using the newly selected mode.

• To exit without saving changes: The unit will revert to normal operation if you do not press the link

button within fteen seconds.

The unit will continue to act as congurated until you activly change the mode (even if you turn the unit off).

MANUAL RESET OF PIN CODE

If LEDs are off – press the link button once to

wake up the device. Press and release the link

button seven times in succession. Then immedi-

ately press and hold the button for three seconds.

You have now successfully reseted the pin code.

SWITCHING BLUETOOTH ON/OFF

If LEDs are off – press the link button once to wake

up the device. Press and release the link button.

Then immediately press and hold the button for three

seconds. For full DMX integrity we recommend to

switch off Bluetooth during operation.

TO LINK

1. Power on the MoonLites you would like to connect.

2. Congure the MoonLite for RX/TX mode (see instructions below)

3. Ensure that the Status LED indicators on all receivers are off to

indicate that the receivers are ready to be linked. (If necessary,

follow the unlink procedure.)

4. On the transmitter, press and release the link button.

5. The transmitter will search for any unlinked receivers. Its Status

LED indicator will ash for 10 seconds and normal operation will

resume.

6. Status LED will display (in the selected universe color)

on successfully linked receivers.

TO UNLINK

• : Unlink one

On the receiver, press and hold

its link button for more than 3

seconds (until ST LED is lit) to

unlink it from a transmitter. The

Status LED indicator will turn off.

• : Unlink all

On the transmitter, press and

hold its link button for more

than 3 seconds (until ST LED is

lit) to unlink all of its receivers.

Produkt Specifikationer

Mærke:	LumenRadio
Kategori:	Controller
Model:	MoonLite

Har du brug for hjælp?

Hvis du har brug for hjælp til LumenRadio MoonLite stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Controller LumenRadio Manualer

LumenRadio CRMX Outdoor RX Manual

1 September 2024

LumenRadio CRMX Outdoor Flex Manual

1 September 2024

LumenRadio CRMX Stardust Manual

1 September 2024

LumenRadio MoonLite Manual

1 September 2024

LumenRadio CRMX Slim TX Manual

1 September 2024

LumenRadio CRMX Luna Manual

1 September 2024

LumenRadio CRMX Aurora Manual

1 September 2024

LumenRadio CRMX Slim RX RDM Manual

1 September 2024

LumenRadio CRMX Galileo TX Manual

1 September 2024

Controller Manualer

Nyeste Controller Manualer

Sonance VC60R Manual

2 April 2025

Trust Mylox GXT 735G Manual

30 Marts 2025

Trust Mylox GXT 735 Manual

30 Marts 2025

American DJ STAGE SETTER-8 Manual

30 Marts 2025

American DJ DP-DMX20L Manual

30 Marts 2025

Visual Productions TimeCore Manual

30 Marts 2025

PCE Instruments PCE-RE22T Manual

28 Marts 2025

Turtle Beach Recon Manual

27 Marts 2025

PowerA Enhanced Wireless Controller Manual

26 Februar 2025

IPEGA PG-9078 Manual

20 Februar 2025