Mikrotik CME22-2n-BG77 Manual

Mikrotik Ikke kategoriseret CME22-2n-BG77

Læs gratis den danske manual til Mikrotik CME22-2n-BG77 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Mikrotik CME22-2n-BG77, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

CME22-2n-BG77

CME22-2n-BG77CME22-2n-BG77

CME Gateway (CME22-2n-BG77)

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the

correct hardware or to follow the correct procedures could result in a hazardous situation for people and damage to the system.

This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.

Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.

Read the installation instructions before connecting the system to the power source.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your

own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

Exposure to Radio Frequency Radiation:

Exposure to Radio Frequency Radiation:Exposure to Radio Frequency Radiation:This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an

uncontrolled environment.This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the

general public.

Connecting

Make sure your Internet service provider is allowing hardware change and will issue an automatic IP address.

Connect your ISP cable to the first Ethernet port or, if cellular CAT-M connection is required, open the bottom section and install the SIM card into

the respective SIM slot;

Connect the device to the power source;

Open network connections on your computer, search for MikroTik wireless network and connect to it, or, connect your PC to the second Ethernet

port;

The configuration can to be done through the wireless network using a web browser or mobile app, or through the Ethernet connection using a

web browser. Alternatively, you can use a WinBox configuration tool ;https://mt.lv/winbox

Open in your web browser to start configuration, user name: admin and there is no password by default (or, for some models, http://192.168.88.1

check user and wireless passwords on the sticker);

Click the Check for updates button and update your RouterOS software to the latest version, must have an active Internet connection;

In the Quick Set, choose your country and apply country regulation and wireless settings;

Set up your wireless network password;

Set up your router password.

Mounting and bottom lid

The backside of the device has 2 holes, where you can input the metal ring.

Unscrew the metal ring to loosen it, put one end of the metal ring into the hole and wrap the ring around the pole or a mast, then screw the metal

ring to tighten it up - see. 1.

Unscrew the two screws under the bottom lid. When they are loose, slightly pull down the bottom lid to open access to Ethernet ports, SIM slot

and reset button - see. 2.

Remove the plastic cap to open up a hole for Ethernet cables - see. 3.

Powering

Ethernet port accepts 802.3af/at Power over Ethernet 18-57 V DC.

2-pin terminal input Voltage 12-57 V DC.

The power consumption under maximum load with attachments can reach 31 W. Max power consumption without attachments 6W.

Connecting to a PoE Adapter:

Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.

Produkt Specifikationer

Mærke:	Mikrotik
Kategori:	Ikke kategoriseret
Model:	CME22-2n-BG77

Har du brug for hjælp?

Hvis du har brug for hjælp til Mikrotik CME22-2n-BG77 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Mikrotik Manualer

Mikrotik mANT 15s Manual

3 Januar 2025

Mikrotik CRS320-8P-8B-4S Manual

4 September 2024

Mikrotik LtAP LR8 LTE6 kit Manual

2 September 2024

Mikrotik Woobm-USB Manual

31 August 2024

Mikrotik CME22-2n-BG77 Manual

27 August 2024

Mikrotik hAP ac³ Manual

25 August 2024

Mikrotik L009UiGS-2HaxD-IN Manual

25 August 2024

Mikrotik hAP ax² Manual

25 August 2024

Mikrotik hAP ax³ Manual

25 August 2024

Mikrotik hAP Manual

25 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Racktime Me 2.0 Manual

1 Juli 2025

Ikea SLÅN 302.698.17 Manual

1 Juli 2025

FANAUE CC-06 Manual

1 Juli 2025

Panasonic CS_CU-E9CKP Manual

1 Juli 2025

Ortlieb Quick Rack Light Manual

1 Juli 2025

Cameo DVC D5 Manual

1 Juli 2025

Ikea SÄFFEROT 405.657.23 Manual

1 Juli 2025

Ikea UTRUSTA 802.998.69 Manual

1 Juli 2025

Gigabyte BRIX GB-BRi5H-1335 Manual

1 Juli 2025

DeWalt DW631K Manual

1 Juli 2025