Mikrotik CRS125-24G-1S-2HnD-IN Manual

Mikrotik Ikke kategoriseret CRS125-24G-1S-2HnD-IN

Læs gratis den danske manual til Mikrotik CRS125-24G-1S-2HnD-IN (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Mikrotik CRS125-24G-1S-2HnD-IN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

CRS125-24G-1S-series

CRS125-24G-1S-seriesCRS125-24G-1S-series

CRS125-24G-1S-IN

CRS125-24G-1S-2HnD-IN

First use

The device can be accessed through the IP 192.168.88.1, the username is admin and there is no password (or, for some models, check user and wireless

. Please connect with your web browser to this IP address to configure it. See this page for connection and configuration guides: passwords on the sticker) h

ttps://wiki.mikrotik.com/wiki/Category:Manual

The device comes preinstalled with RouterOS and is ready to use. The device is compatible with RouterOS v6 and newer.

For the wireless model CRS125-24G-1S-2HnD-IN, ports are switched, wireless interface and switch are bridged, and the bridge contains a DHCP server.

Eth1 and SFP1 have DHCP client configured. After connected choose your country, to apply country regulation settings.

Update the device by clicking the "Check for updates" button to v6.46 or the latest RouterOS software to ensure the best performance and

stability. The device needs to have an active internet connection.

To manually update the device, go to our download pagehttps://mikrotik.com/download

Choose your architecture (ARM) and download the latest packages from any channel to your PC.

Open Winbox and upload packages in the Files menu.

Reboot the device.

Updating software will ensure the latest security fixes and regulations set by local law.

Set up your password to secure the device.

Powering

The device accepts direct-input power jack: 10-28 V (24 V0.8 A PSU included in the package).

The power consumption under maximum load can reach 20 W.

Configuration

Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version

ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to

conform with local regulations.

RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to

the possibilities: . In case IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address https://mt.lv/help https://mt.lv/winbox

of the device from the LAN side (all access is blocked from the Internet port by default).

For recovery purposes, it is possible to boot the device from the network, see a section .Reset button

Expansion slots and ports

Twenty four (24) 10/100/1000 (Gigabit) Ethernet ports (Auto MDI/X)

CRS125 has one SFP cage, compatible with 1.25G SFP modules.

CRS125-24G-1S-2HnD-IN has built-in 802.11b/g/n 2GHz wireless access point.

Reset button

The routerBOOT reset button has the following functions. Press the button and apply the power, then:

Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.

Release the button when the LED turns solid green to clear all configuration and defaults.

Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers (required for reinstalling RouterOS over

the network).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.

Useful for RouterBOOT debugging and recovery.

Operating system support

The device supports RouterOS software with the version number at or above what is indicated in the RouterOS menu /system resource. Other operating

systems have not been tested.

Safety Notice

Electric shock hazard. This equipment is to be serviced by trained personnel only. This is a class A device, operating it near residential radio equipment

could cause radio interference.

CRS125-24G-1S-IN: