Mikrotik CSS610-8P-2S+IN Manual

Mikrotik Ikke kategoriseret CSS610-8P-2S+IN

Læs gratis den danske manual til Mikrotik CSS610-8P-2S+IN (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Mikrotik CSS610-8P-2S+IN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

CSS610-8P-2S+IN

CSS610-8P-2S+INCSS610-8P-2S+IN

CSS610-8P-2S+IN

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the

correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.

Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.

Read the installation instructions before connecting the system to the power source.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your

own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be professionally installed.

Quick start

Download the latest SwitchOS software version fromhttps://mikrotik.com/download;

Connect your computer to any of the ethernet ports;

Connect the device to the power source;

Set the IP address of your computer to 192.168.88.3;

Open your Web browser, the default management IP address is 192.168.88.1, with the username and no password

admin

 (or, for some models,

;check user and wireless passwords on the sticker)

Upload the file with the web browser to the Upgrade tab, the device will reboot after an upgrade;

Set up your password to secure the device.

Powering

The device accepts power from the power jack or from the AC source.

Direct-input power jack (5.5mm outside and 2mm inside, female, pin positive plug) accepts 48-57V DC.

AC input:

Nominal voltage 54 V.

Nominal current 2.8 A.

AC input range 100-240 V.

Max power consumption (without attachments) 12 W.

Max power consumption 162 W.

PoE-out 802.3af/at and passive PoE-out.

Smart PoE Controller.

PoE-out ports Ether1-Ether8, max out per port output (input < 30 V): 1000 mA.

max out per port output (input > 30 V): 625 mA.

Total output power 140 W.

Connecting to a PoE Adapter:

Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.

Connect an Ethernet cable from your local network (LAN) to the PoE adapter.

Connect the power cord to the adapter, and then plug the power cord into a power outlet.

LED

The power supply will be determined by a device and given the appropriate Voltage if it's low the LED will light Green if the requirement is the high LED will

light red, and none when no power is required for the client device.

Configuration

SwOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the

possibilities: .

https://mt.lv/help

For recovery purposes, it is possible to boot the device for reinstallation, see section .Buttons and Jumpers

First-time configuration ;https://wiki.mikrotik.com/wiki/SwOS/CSS610

The device upgrade ;https://mt.lv/upgrade

Extension slots and ports

Product code CSS610-8P-2S+IN.

A number of 1G Ethernet ports 8.

A number of 10G SFP+ ports 2.

Switch chip model 88E6193X.

Dimensions 272 x 216 x 50 mm.

Operating temperature -40°C to +70°C.

Specifications

Please visit wiki pages for the MikroTik SFP module compatibility table: https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table

Mounting

The device is designed to use indoors and it can be mounted in a rackmount enclosure using provided rack mounts, or it can be placed on the desktop.

Use a Phillips screwdriver to attach rackmount ears on both sides of the device if designated use is for rackmount enclosure:

Attach rack ears to both sides of the device and tighten four screws to secure them in place, as shown in the picture.

Produkt Specifikationer

Mærke:	Mikrotik
Kategori:	Ikke kategoriseret
Model:	CSS610-8P-2S+IN
Kode for international beskyttelse (IP):	IP20
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	272 mm
Dybde:	216 mm
Højde:	50 mm
Produktfarve:	Hvid
Opbevaringstemperatur (T-T):	-40 - 70 °C
Kabler inkluderet:	Vekselstrøm
Operativsystem installeret:	SwitchOS Lite
Strømkilde:	Vekselstrøm/jævnstrøm
Certificering:	EAC
Strømforbrug (maks.):	162 W
Netværksstandarder:	IEEE 802.3af, IEEE 802.3at
Knap til nulstilling:	Ja
LED-indikatorer:	Ja
Bæredygtighedscertifikater:	CE, RoHS
DC indgangsspænding:	48 - 57 V
Processormodel:	Marvell 88E6193X
Indgangsstrøm:	2.2 A
Flashhukommelse:	0.064 MB
Strøm over Ethernet (PoE):	Ja
Overholdelse af bæredygtighed:	Ja
Gennemsnitstid mellem fejl (MTBF):	200000 t
Switch-type:	Administreret
Total Power over Ethernet (PoE):	140 W
10G understøttelse:	Ja
VLAN understøttelse:	Ja
Broadcast stormkontrol:	Ja
Basis omskiftning RJ-45 Ethernet porte, antal:	8
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Filtrering af MAC-adresser:	Ja
MAC adresselabel:	- entries
Switch kapacitet:	56 Gbit/sek.
Stativ-montering:	Ja
Power over Ethernet (PoE) porte, antal:	8
Strømforsyning inkluderet:	Ja
Rack monteringskit:	Ja
Antal installerede SFP+ moduler:	2
Ventilatorfri:	Ja
Power over Ethernet (PoE) -type understøttet:	Passive PoE