Mikrotik D-5G-30D3 Manual

Mikrotik TV antenne D-5G-30D3

Læs gratis den danske manual til Mikrotik D-5G-30D3 (4 sider) i kategorien TV antenne. Denne vejledning er vurderet som hjælpsom af 104 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 52.5 anmeldelser. Har du et spørgsmål om Mikrotik D-5G-30D3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

KJ L M O Q RN P S

Parabolic Dish

Antenna Feed

Feed Bracket

Back Plate

Pole Clamp

Case Holder

RF Cable

Self-Bonding Tape Slice

M8 U-Bolt

M6x20 Bolt

M4x12 Bolt

M4 Wing Nut

M4 Serrated Washer

M6 Nut

M6 Spring Lock Washer

M6 Washer

M8 Nut

M8 Spring Lock Washer

M8 Fender Washer

ITEM DESCRIPTION QTY

MikroTik Antenna assembly preview

MikroTik Antenna assembly preview back* MikroTik Antenna assembly preview front

A B C D

E F G H I

MikroTik Antenna D-5G-30D3

Quick setup guide and warranty information

Package contents

MikroTik Radio

*The preview is valid if a MikroTik RB900 series outdoor device

(sold separately) is installed.

Installation Guide

0. Items Required

• 10mm Wrench 13mm Wrench • • PH2 Screw Driver •

• This guide is written to be used with a MikroTik RB900 series outdoor

device (sold separately) •

1. Install Back Plate to Parabolic Dish

Install Back Plate [D] to Parabolic Dish [A] using:

[J] M6x20 Bolt x 4 pcs;

[P] M6 Washer x 4 pcs;

[O] M6 Spring Lock Washer x 4 pcs;

[N] M6 Nut x 4 pcs.

Important:

• Back Plate [D] must be aligned respecvely to a bore in the

Parabolic Dish [A] - see Fig. 1;

• M6 Nut [N] ghtening torque must be approximately 5 Nm.

2. Install Antenna Feed

Install Antenna Feed [B] to Parabolic Dish [A] using:

[C] Feed Bracket x 1 pc;

[K] M4x12 Bolt x 4 pcs;

[M] M4 Serrated Washer x 4 pcs.

Install grounding fasteners:

[L] M6 Wing Nut x 1 pc;

[M] M4 Serrated Washer x 1 pc.

Important:

• Antenna Feed [B] and Feed Bracket [C] must be aligned respecvely

to the alignment bore in the Parabolic Dish [A] - see Fig. 2;

• M4x12 Bolt [N] ghtening torque must be approximately 2 Nm.

3. Install Pole Clamp

Install Pole Clamp [E] to Back Plate [D] - see Fig. 3, using:

[J] M6x20 Bolt x 1 pc;

[P] M6 Washer x 1 pc;

[O] M6 Spring Lock Washer x 1 pc;

[N] M6 Nut x 1 pc.

Important:

• Do not ghten M6 Nut [N] ﬁrmly unl step 7.

FIG. 1

FIG. 2

C BMK

FIG. 3

J E O ND P

FIG. 4.2FIG. 4.1

M3x8FL

4. Aach MikroTik Radio to Back Plate

Aach a to Case Holder [F] using:MikroTik RB900 series outdoor device

[-] M3x8 Bolt x 4 pcs (Comes with MikroTik Radio) - see Fig. 4.1.

Aach Case Holder [F] to Back Plate [D] by ﬁng Case Holder’s hinges

into the Back Plate’s ﬂange - see Fig. 4.2. Secure Case Holder using:

[L] M4 Wing Nut x 1 pc.

Important:

• M3x8 Bolt [-] ghtening torque must be approximately 1.5 Nm.

Produkt Specifikationer

Mærke:	Mikrotik
Kategori:	TV antenne
Model:	D-5G-30D3

Har du brug for hjælp?

Hvis du har brug for hjælp til Mikrotik D-5G-30D3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

TV antenne Mikrotik Manualer

Mikrotik D-5G-30D3-PA Manual

25 August 2024

Mikrotik Sleeve30 Manual

25 August 2024

Mikrotik D-5G-30D3 Manual

14 Februar 2024

TV antenne Manualer

Nyeste TV antenne Manualer

RCA ANTB55EV Manual

1 August 2025

Emos J0806 Manual

1 August 2025

Emos J0690 Manual

31 Juli 2025

One For All SV9143 Manual

26 Juli 2025

Metronic 416961 Manual

8 Juli 2025

Kathrein CAS 60 Manual

8 Juli 2025

Kathrein CAS 90 Manual

8 Juli 2025

Metronic 415981 Manual

7 Juli 2025

Winegard DS-3101 Manual

5 Juli 2025

Winegard Prostar PR-5646 Manual

5 Juli 2025