Muse M-103 IP Manual

Muse Højttaler M-103 IP

Læs gratis den danske manual til Muse M-103 IP (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Muse M-103 IP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

To check the alarm settings

In OFF mode, press ALM. 1/M- (9) or ALM. 2/M+ (10) button. Time and alarm source of

the corresponding alarm are displayed for 5 seconds.

Turning off Alarm

The alarm is programmed to run for 59 minutes and triggers progressively.

Once the alarm 1 or alarm 2 is activated, corresponding alarm indicator “ ” / “ ”,

“ ”/” ” or “ ” / “ ” will flash on display,

1. In wake up mode, to temporarily stop alarm, press the SNOOZE/DIM button (7). The

alarm will resume to the previous playing mode after 9 minutes. “ ” / “ ”, “ ”/” ”

or “ ” / “ ” and “SNOOZE” are on display.

2. To stop the alarm for 24 hours, press ON/OFF button (1), “ ” / “ ”, “ ”/” ”

or “ ” / “ ” remains displayed. The alarm will trigger at the preset time one day later.

3. To turn off the alarm permanently, in OFF mode, press and hold ALM. 1/M- (9) or ALM.

2/M+ (10) until “ ” / “ ”, “ ”/” ” or “ ” / “ ” disappears.

NOTE:

- You can adjust the wake up sound level by VOL+/- button on wake to iPhone/iPod or

radio modes your last setting.

- But since this is a progressive alarm, the sound will be louder and louder. You could

decrease the volume after the alarm reaches to its max volume level (24).

In OFF mode, press ALM. 1/M- (9) or ALM. 2/M+ (10) button, alarm type will flash on

display. Press (11) or (12) button to select to wake up by buzzer, iPhone/iPod,

or radio. The icon “ ”/“ ”, “ ”/” ” or “ ”/ “ ” will show on display

accordingly.

- “ ” or “ ” (wake up by buzzer): “Beep“ sound comes when the alarm time is

reached.

- “ ” or ” ” (wake up by iPod): Follow the procedure in “PLAY YOUR DOCKABLE

iPhone/iPod”. The iPhone/iPod will start playing automatically when the alarm time is

reached and the unit is off.

- “ ” or “ ” (wake up by radio): Follow the procedure in “LISTENING TO THE

RADIO” to select your desired radio station. The radio will turn on automatically when

the alarm time is reached and the unit is off.

Press ALM. 1/M- (9) or ALM. 2/M+ (10) button again, the hour digit flashes on display.

Press the (11) or (12) button to adjust the hour.

Press ALM. 1/M- (9) or ALM. 2/M+ (10) button again, the minute digit flashes on

display. Press the (11) or (12) button to adjust the minutes.

Press ALM. 1/M- (9) or ALM. 2/M+ (10) to save the setting of alarm 1 or alarm 2. The

display will resume to the current time.

This unit can be set for two different wake up times which you can choose to use inde-

pendently or simultaneously ALARM1, ALARM2 or both ALARM1 and ALARM 2.

Alarm 1 or Alarm 2 setting

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

ON/OFF button

VOL + / - buttons

EQ button (equalizer)

MEMO./SET button (memory/clock

setting)

FUNCTION button

iPhone/iPod Socket

SNOOZE/DIM button

SLEEP Button

ALM. 1/M- button

ALM. 2/ M+ button

button

button (play/pause)

LCD display

Speakers

FM Wire Antenna

VIDEO OUT jack

AUX IN jack

DC input (AC adaptor jack)

Battery Backup Compartment

M-103 IP

GB - 1

User Manual

Docking Clock Radio PLL for iPhone/iPod

Please read the instruction carefully

before operating the unit.

English GB - 2

GB - 4

Main Unit

Top View

BASIC OPERATION

Back View

GB - 3 GB - 5

UNPACKING YOUR UNIT

PRODUCT DESCRIPTION

TIME SETTING

Current time

When used for the first time, or if the mains plug has been removed with no backup

battery inside, the clock display will blink.

1. In OFF mode, Press the MEMO./SET button (4) on the unit, the clock blinks on the

display.

2. With clock display blinking, press FUNCTION button (5) to select 12 or 24 hour format.

3. Press the MEMO./SET button (4), the hour digits will flash, set the hour with (11)

or (12) button.

4. Press the MEMO./SET button (4) to save the hour setting, the minute digits flash. Set

the minutes with (11) or (12) button.

5. Press MEMO./SET button (4) to complete time setting.

NOTE: With clock display blinking, if no button is pressed within 8 seconds, it will return

to previous clock display.

SLEEP (Automatic turn off)

In sleep mode, the unit will turn off automatically after a specified time.

Note: Sleep time can only be set when the unit is turned ON.

You can select duration in minutes before the unit turns off automatically. Press SLEEP

button (8) repeatedly to select 90-80-70-60-50-40-30-20-10 or 00 minutes, then release

SLEEP button (8). “SLEEP” icon displays.

NOTES:

- To turn off the unit before the SLEEP activates, press ON/OFF button (1), or press

SLEEP button (8) repeatedly until value is adjusted to “00”. It will return to normal display

after 5 seconds, the sleep function will be cancelled and “SLEEP” icon will not be displayed.

- If the playing time from your iPhone or other player is shorter than the selected sleep

time, the music will stop at the end of the playing time.

ALARM SETTING

Cautions:

- The included AC adaptor is for use with this unit only. Do not use it with other equipments.

- When the unit is not going to be used for long time, disconnect the AC adaptor from the

AC outlet.

- Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from

the wall outlet at once.

- When the AC adaptor is plugged in, the apparatus is not completely disconnected from

the main power source, even when the unit is turned off.

- AC adaptor is used as the disconnect device. It shall remain readily operable and should

not be obstructed during intended use. To disconnect the apparatus from supply mains,

completely disconnect the AC adaptor of the apparatus from the mains socket outlet

Battery backup system

DC power: 2x1.5V, battery type AAA/R03/UM4 (not provided) for clock and alarm time

backup system.

An alkaline type battery is recommended. For optimum performance, this battery should

be replaced every 6 months.

BACKUP SYSTEM: All clock settings will be kept in memory; however, the clock time

may require adjustment for exact accuracy. If the backup battery is not installed, the

display will show the clock flashing to indicate that you have to reset the time and the

alarm.

Note: When the battery backup is functioning, the display has no backlight.

When you unpack your new iPhone/iPod clock-radio, make sure that you have removed

all the accessories and information papers:

- Docking Clock Radio PLL for iPhone/iPod

- AC adaptor

- 5 pieces iPhone/iPod interchangeable adaptors

- 1 piece Dust Cover

- User manual

LCD DISPLAY

D1. - Alarm #1 wake to buzzer

- Alarm #2 wake to buzzer

- Alarm #1 wake to iPhone/iPod

- Alarm #2 wake to iPhone/iPod

- Alarm #1 wake to radio

- Alarm #2 wake to radio

D2. -iPhone/iPod mode playback

D3. - Radio mode

D4. - AUX IN mode

D5. Equalizer modes

D6. Volume

D7. SNOOZE

D8. SLEEP

D9. Memory

D10.Time or radiofrequency display

D11. FM Stereo.

D12. Radio frequency unit

D13. “PM”-12hr time mode display

Turn on the unit

The unit is in clock mode when it is plugged in, Press ON/OFF button (1) to turn on or

turn off the unit.

Operating mode selection (FUNCTION)

Press FUNCTION button (5) repeatedly to select iPhone/iPod, AUX or Radio mode.

Sound volume

Press VOL +/- button (2) to adjust sound level. There are a total of 32 volume levels.

Equalizer

When listening to the radio, iPhone/iPod or other music source from AUX IN, press the

EQ button (3) repeatedly to select different modes: CLASSIC, ROCK, POP, JAZZ or EQ

off.

Display dimmer

In OFF mode, press the SNOOZE/DIM button (7) repeatedly will change the backlight

brightness of the display. There are 3 levels: low, medium, and high.

POWER SUPPLY

Using the AC adaptor

This AC adaptor operates on AC100-240V~50/60Hz.

• The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V~50/

60Hz and should only be connected to a mains supply within these parameters.

• Use the supplied AC adaptor only. Using any other AC adaptor could damage the unit.

iPhone/iPod

not included

ＩＣＲ－２４８６　ＩＢ　ＭＵＳＥ　００１　ＲＥＶ０－ＧＢ．Ｐ６５ 2010-7-12, 15:411

Produkt Specifikationer

Mærke:	Muse
Kategori:	Højttaler
Model:	M-103 IP

Har du brug for hjælp?

Hvis du har brug for hjælp til Muse M-103 IP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Muse Manualer

Muse M-1930 DJ Manual

3 August 2025

Muse M-968 BTY Manual

1 August 2025

Muse M-968 BTR Manual

31 Juli 2025

28 Juni 2025

27 Juni 2025

1 April 2025

31 December 2025

Muse M-750 FBT Manual

30 December 2025

Muse ML-625 BT Manual

6 December 2024

Muse M-1937 DJ Manual

4 December 2024

Højttaler Manualer

Nyeste Højttaler Manualer

TDK TP6803BLK Manual

28 Oktober 2025

TDK TREK Flex A28 Manual

28 Oktober 2025

Altec Lansing inMotion iM4 Manual

24 Oktober 2025

Vonyx VX822 Manual

21 Oktober 2025

Memphis Audio SRX42 Manual

19 Oktober 2025

Memphis Audio MS62 Manual

19 Oktober 2025

Madison MAD-CENTER120 Manual

19 Oktober 2025

Goji Mini GMINIG17 Manual

19 Oktober 2025

Audison VOCE AV 12 Manual

19 Oktober 2025

Memphis Audio VIV60CV2 Manual

18 Oktober 2025