Nitecore MH1A Manual

Nitecore Lommelygte MH1A

Læs gratis den danske manual til Nitecore MH1A (1 sider) i kategorien Lommelygte. Denne vejledning er vurderet som hjælpsom af 78 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 39.5 anmeldelser. Har du et spørgsmål om Nitecore MH1A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

User Manual

Features

• Premium CREE XM-L2 T6 LED

• Maximum output of 600 lumens

• High efficiency regulation circuit

• Maximum runtime of up to 23 hours

• Intelligent charging circuit with voltage detection charges safely and rapidly

• Integrated micro USB charging port is water, dust and impact resistant.

• Multiple output modes are conveniently accessed via rapid rotary switch

• User-defined mode provides customized brightness levels plus strobe and SOS

modes.

• Intelligent memory function stores preferred brightness setting

• Broad voltage circuit accepts both 14500 battery and AA battery

• Optimized ultra-precise reflector offers a longer beam distance than competing

products

• Waterproof in accordance with IPX-8 (submersible to two meters)

• Toughened ultra-clear mineral glass with anti-reflective coating

• Constructed from aerospace-grade aluminum alloy

• HAIII military grade hard-anodized

• Reverse polarity protection

• Detachable two-way anti-rolling clip

• Anti-rolling design

Dimensions

Length: 127mm (5”)

Head Diameter: 25.4mm (1”)

Tail Diameter: 21.5mm (0.85” )

Weight: 75grams (1.62oz)(without battery)

Thanks for purchasing NITECORE!

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000 FAX: +86-20-83882723

E-mail: info@nitecore.com Web: www.nitecore.com

Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

Battery Options

The All-Round Flashlight Expert

Operation instructions

Battery installation (see adjacent diagram)

1. Unscrew the tail cap in a counter-clockwise

direction.

2. Insert one 14500 battery with the

positive pole pointing forward (toward the

light head).

NOTE:

Ensure batteries are inserted with the

positive (+) end pointing to the head. The

MH1A will not operate with incorrectly

inserted batteries.

Charging indicator light

1. Connect the charging cable to the flashlight and the A/C power adapter to the wall

outlet as shown in the adjacent image. Fully charging a depleted 14500 battery

takes approximately 2 hours.

2. Under normal charging conditions, the red indicator light near the charging port will

blink twice every second.

3. If a problem is detected during the charging process, the MH1A will stop charging

and the red indicator will blink rapidly. This is usually caused by faulty or

incorrectly inserted batteries.

4. When charging is complete, the red indicator will illuminate steadily.

Accessories

Nitecore 14500 Li-ion battery(NL147),

lanyard, USB cable, clip, holster,

spare switch cap and spare O-ring

*Warning: Charge 14500 rechargeable Li-ion batteries only, do not attempt to

charge non-rechargeable batteries, i.e. AA batteries.

Brightness & Runtime

NOTICE

Stated data has been

measured according to

the international

flashlight testing

standards ANSI/NEMA

FL1 using one NITECORE

14500 battery (3.7V,

750mAh) under

laboratory conditions.

The data may vary due

to individual usage

habits and environmental

conditions.

NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop

the ANSI FL1 standard of measurement. Product testing data is in accordance with

these internationally recognized scientific standards.

Caution:

The MH1A needs to be turned on in

order to enter charging mode.

Switching ON/OFF

To switch ON: Press the button on the tailcap until a “click” is heard.

To switch OFF: Press the button on the tailcap a second time until a “click” is heard.

Mode Switching

The Nitecore MH1A has two modes: Turbo and user-defined. These two modes can

be changed by simply tightening and loosening the flashlight head. Turbo provides

100% output while user-defined contains five selectable sub-modes.

Turbo Mode

Turbo mode provides an output of 550 lumens and is accessed when the flashlight is

switched ON with the head lightly tightened. While in this mode, momentary

illumination can be achieved by switching off the flashlight and then half pressing and

holding the switch.

Note: After three minutes of use in turbo mode, the flashlight will lower its

output automatically to preventing overheating and increase runtime.

User-Defined Mode

User-defined mode is accessed by slightly loosening the flashlight head. In this mode,

lightly and rapidly pressing the switch will cycle through brightness and other

functions in the following order: “High-Mid-Low-SOS-Strobe”. Pressing the switch all

the way down will save and memorize a desired setting.

Tips: Make NITECORE MH1A your perfect Multitask Hybrid flashlight.

NITECORE MH1A flashlights essentially have two modes: Turbo mode (100% output)

and custom mode. Turbo mode is accessed by tightening the flashlight head while

any of the five customizable modes (strobe, SOS, low, medium and high) are selected

by loosening the head and rapidly pressing the on/off switch to cycle through the

modes. A given mode can be saved by simply turn off the light while in that mode.

Real-world examples include: When used as a flashlight around the home, the head

can be loosened and low level selected in custom mode, providing long runtimes at a

lower light intensity. The same flashlight could then be taken out and used a

law-enforcement duty light, with user-defined mode set in strobe, making it easy to

alternate between turbo mode and strobe with a simple twist of the flashlight head.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating

of silicon-based lubricant.

Warranty Service

All NITECORE

® products are warranted for quality. DOA / defective products can be

exchanged for replacement though a local distributor/dealer within the 14 days of

purchase. After 14 days, all defective / malfunctioning NITECORE

® products will be

repaired free of charge for a period of 18 months from the date of purchase. After 18

months, a limited warranty applies, covering the cost of labor and maintenance, but

not the cost of accessories or replacement parts. The warranty is nullified in all of the

following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized

parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE

® products and services, please contact your

national NITECORE

® distributor or send an email to service@nitecore.com

Charging Function

The MH1A is capable of charging a protected 14500 Li-ion battery via the included

USB cable. Simply install a protected 14500 Li-ion cell, plugging one end of the USB

cable into the flashlight and the other end into a universal USB port / adaptor and the

MH1A will take care of the rest.

Please follow our facebook for

more info: NITECORE Flashlights

Primary AA battery * AA 1.5V

Rechargeable AA battery * AA 1.2V

Primary AA Lithium battery * L91 1.5V

Primary LiFePO4 battery * 14500 3.2V

Rechargeable Li-ion battery 14500 3.7V

SIZE

Nominal voltage

Compatible

Yes (Compatible but can

NOT be recharged)

Yes (Compatible but can

NOT be recharged)

Yes (Compatible but can

NOT be recharged)

Yes (Compatible but can

NOT be recharged)

Yes (Compatible and

can be recharged)

TURBO HIGH MID LOW

LUMENS

600

LUMENS

min

155m (Beam Distance)

6000cd (Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m (Impact Resistant)

Produkt Specifikationer

Mærke:	Nitecore
Kategori:	Lommelygte
Model:	MH1A

Har du brug for hjælp?

Hvis du har brug for hjælp til Nitecore MH1A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lommelygte Nitecore Manualer

Nitecore MT21C Manual

29 December 2024

Nitecore Thumb Manual

29 December 2024

Nitecore GEM10 Manual

29 December 2024

Nitecore EC4GTS Manual

29 December 2024

Nitecore MT42 Manual

29 December 2024

Nitecore P16TAC Manual

29 December 2024

Nitecore T2s Manual

29 December 2024

Nitecore DL10 Manual

29 December 2024

Nitecore HC30 Manual

29 December 2024

Nitecore GEM8UV Manual

29 December 2024

Lommelygte Manualer

Nyeste Lommelygte Manualer

PowerSmith PHL15F Manual

14 Juni 2025

PowerSmith PHL23FRGS Manual

14 Juni 2025

PNI Adventure F650 Manual

9 Juni 2025

DeWalt DW915 Manual

9 Juni 2025

NightStick USB-558XL Manual

9 Juni 2025

PNI Adventure F420 Manual

8 Juni 2025

Ledlenser P4 Manual

1 Juni 2025

Draper 70299 Manual

31 Maj 2025

NEO Tools 99-130 Manual

30 Maj 2025

Olight Oclip Manual

31 Marts 2025