Nitecore MT1A Manual

Nitecore Lommelygte MT1A

Læs gratis den danske manual til Nitecore MT1A (1 sider) i kategorien Lommelygte. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Nitecore MT1A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

User Manual

Features

• LED Premium CREE XP-G2 R5 LED

• Maximum output of up to 180 lumens

• High efficiency current circuit board

• Maximum runtime of up to 60 hours

• Two rapid switching modes suit various user requirements.

• User-defined mode allows for customized brightness levels and a

multitude of functions

• Intelligent memory functions

• Anti-rolling design

• Reverse polarity protection

• Toughened ultra-clear mineral glass with anti-reflective coating

• Aluminum reflector ensures a smooth and powerful beam

• Aero grade aluminum alloy

• HA III Military grade hard anodized

• Detachable two-way anti-rolling clip

• Purpose-made rhombic knurling for better grip

• IPX8 standard waterproof (submersible to two meters)

Dimensions

Length: 105mm (4.13”)

Head Diameter: 22.56mm (0.92”)

Tail Diameter: 21.5mm (0.85”)

Weight: 55grams (1.94oz)(without battery)

Thanks for purchasing NITECORE!

SYSMAX Innovations Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: info@nitecore.com

Web: www.nitecore.com

Address: Unit 6355, 5/F, No. 1021 Gaopu Road, Tianhe District,

Guangzhou, 510653, Guangdong, China

Brightness & Runtime

The All-Round Flashlight Expert

Accessories

Clip, lanyard, spare plastic cap,

and spare O-ring

Battery Options

TYPE

Nominal voltage Usability

Primary AA battery AA 1.5V Y (Recommended)

Rechargeable AA battery AA 1.2V Y (Recommended)

Primary AA Lithium battery L91 1.5V Y (Recommended)

Rechargeable Li-ion battery 14500 3.7V N (Banned)

NOTICE

Stated data has been measured according to the international flashlight testing

standards ANSI/NEMA FL1 using one high quality AA Ni-Mh rechargeable battery

(1.2V, 2400mAh) under laboratory conditions. The data may vary due to individual

usage habits and environmental conditions.

Operation instructions

WARNING

Ensure batteries are inserted with the positive (+) end pointing to the head.

The MT1A will not operate with incorrectly inserted batteries.

Switching ON/OFF

Switch ON: Press the button on the tailcap until a “click” is heard.

Switch OFF: Press the button at the tailcap until a second time until a “click” is

heard.

Mode Switching

The Nitecore MT1A has two modes: Turbo and user-defined. These two modes

can be changed by simply tightening and loosening the flashlight head. Turbo

provides 100% output while user-defined users contains five selectable

sub-modes.

Turbo Mode

Turbo mode is accessed when the MT1A flashlight is switched ON and the

head lightly tightened. While in this mode, momentary illumination can be

achieved by switching off the flashlight and then half pressing and holding the

switch. Momentary illumination can be used as a flashing signal indicator or

apply to various tactical applications.

Note: After three minutes’ using of turbo mode, the flashlight will lower its

output automatically for preventing overheating, and efficiently ensure the

battery runtime.

User-Defined Mode

User-defined mode is accessed by slightly loosening the flashlight head. In this

mode, lightly and rapidly pressing the switch will cycle through brightness and

other functions in the following order: “High-Mid-Low- SOS-Strobe”. Pressing

the switch all the way down will save and memorize a desired setting.

Tips: Make NITECORE MT1A your perfect multi-task flashlight.

NITECORE MT1A flashlights essentially have two modes: Turbo mode (100%

output) and custom mode. Turbo mode is accessed by tightening the flashlight

head while any of one of the four customizable modes (strobe, low, medium

and high) are selected by loosening the head and rapidly pressing the on/off

switch to cycle through the modes. A given mode can be saved by simply turn

off the light while in that mode. Real-world examples include: When used as a

flashlight around the home, the head can be loosened and low level selected in

custom mode, providing long runtimes at a lower light intensity. The same

flashlight could then be taken out and used a law-enforcement duty light, with

user-defined mode set in strobe, making it easy to alternate between turbo

mode and strobe with a simple twist of the flashlight head.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin

coating of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective / malfunctioning

NITECORE® product can be repaired free of charge for a period of 60 months (5

years) from the date of purchase. Beyond 60 months (5 years), a limited warranty

applies, covering the cost of labor and maintenance, but not the cost of accessories

or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized

parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact a

local NITECORE® distributor or send an email to service@nitecore.com

※All images, text and statements specified herein this user manual are for reference

purpose only. Should any discrepancy occurs between this manual and information

specified on www.nitecore.com, information on our official website shall prevail.

SYSMAX Innovations Co., Ltd. reserves the rights to interpret and amend the content

of this document at any time without prior notice.

TURBO HIGH MID LOW SOS STROBE

LUMENS

180

LUMENS

180

LUMENS

min

_____

LUMENS

180

_____

115m

3350cd

77m

1500cd

55m

755cd

33m

280cd

IPX8, 2m

(Waterproof AND Submersible)

(Impact Resistant)

Battery Installation /

Removal

As illustrated, after unscrewing the

battery cap, insert / remove the

battery(s) and screw to tighten the

battery cap.

Battery installation

1. Unscrew the tail cap in a

counter-clockwise direction.

2. Insert one AA battery or other

compatible batteries with the

positive pole pointing forward

(toward the light head).

MT27061A22

Please find us on facebook:

NITECORE Flashlight

Made in China

Produkt Specifikationer

Mærke:	Nitecore
Kategori:	Lommelygte
Model:	MT1A

Har du brug for hjælp?

Hvis du har brug for hjælp til Nitecore MT1A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lommelygte Nitecore Manualer

Nitecore MT21C Manual

29 December 2024

Nitecore Thumb Manual

29 December 2024

Nitecore GEM10 Manual

29 December 2024

Nitecore EC4GTS Manual

29 December 2024

Nitecore MT42 Manual

29 December 2024

Nitecore P16TAC Manual

29 December 2024

Nitecore T2s Manual

29 December 2024

Nitecore DL10 Manual

29 December 2024

Nitecore HC30 Manual

29 December 2024

Nitecore GEM8UV Manual

29 December 2024

Lommelygte Manualer

Nyeste Lommelygte Manualer

PowerSmith PHL15F Manual

14 Juni 2025

PowerSmith PHL23FRGS Manual

14 Juni 2025

PNI Adventure F650 Manual

9 Juni 2025

DeWalt DW915 Manual

9 Juni 2025

NightStick USB-558XL Manual

9 Juni 2025

PNI Adventure F420 Manual

8 Juni 2025

Ledlenser P4 Manual

1 Juni 2025

Draper 70299 Manual

31 Maj 2025

NEO Tools 99-130 Manual

30 Maj 2025

Olight Oclip Manual

31 Marts 2025