Nubert nuConnect ampX Manual

Nubert Modtager nuConnect ampX

Læs gratis den danske manual til Nubert nuConnect ampX (4 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Nubert nuConnect ampX, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
nuConnect ampX · Quick Start Guide · 08/2020 1
nuConnect ampX
Integrated Amplifier and Wireless Connector
QUICK START
GUIDE
®
!
1 Mounting the antennas
Place the nuConnect ampX on a at, stable surface. Ma
that there is some free space around the amplier to ensure proper
cooling.
To mount the antennas, Place the antennas over the antenna termi-
nals on the rear panel and turn the antennas clockwise until they are
rmly attached. Point the antennas upwards.
22 Cable connections
Make sure all cable connections between amplier, sources, loudspeakers and (optional) subwoofer are made
before switching the amplier on!
Sources, subwoofer Passive
loudspeakers
At the digital Port input,
you can plug in the
supplied HDMI/ARC
adapter, enabling
the direct connection
of a TV.
Be sure to enable the
CEC and ARC functions
on the TV and set
the audio output format
to PCM.
The nuConnect ampX is
connected to the power grid using
the supplied power-cable.
Move the power switch on the back
to the ON position to switch on the
amplier! If necessary, press the
power-button on the remote control
to “wake up” the amplier.
You can nd the most recent version of the
operating manual here: www.nubert.de/downloads/61/
All X-platform-based devices can exchange audio- and control-infor-
mation with each other.
(This functionality is only available when the nuConnect ampX is
used as an integrated amplier in combination with passive loud-
speakers. If you wish to connect a subwoofer, this must use a wired
connection too.)
The nuConnect must be set up as and connected to the wls slave
transmitting device. The amplier remains fully operable. Standby
power consumption is < 2,0 Watts.
➀
After switching on the nuConnect ampX, the display will show you
the set volume and input. This is the sub-menu, press volume
to
return to the main menu.
➁
Turn the
rotary encoder to get to the menu and press setup
the encoder to conrm.
➂
Turn the rotary encoder to get to the menu and wls slave
press the encoder to conrm. The display of the nuConnect ampX
will show for up to 60 seconds while trying to connect connecting
to a master device.
➃
Now congure the transmitting device, a nuPro X speaker or an-
other nuConnect for instance.Go to the menu of the transsetup -
mitting device, select and conrm your selection to wls master
begin the pairing process. Please refer to the manual of your specic
X-family device.
Once a connection is established, the displays on both devices will
briey show . An established connection will be permaconnected -
nently indicated on each device by the
symbol. The received
signal is available at the wireless (wls) input which can then be se-
lected like any other input.
2
2
nuConnect ampX · Quick Start Guide · 08/2020
3A
Wireless connections: The nuConnect as the receiving device
setup
wls slave
wls master
coax -30dB
coax -30dB
wls master ><
><

Produkt Specifikationer

Mærke: Nubert
Kategori: Modtager
Model: nuConnect ampX

Har du brug for hjælp?

Hvis du har brug for hjælp til Nubert nuConnect ampX stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Nubert Manualer

Nubert

Nubert nuConnect ampX Manual

30 Januar 2025

Modtager Manualer

Nyeste Modtager Manualer

CYP

CYP AU-A220 Manual

30 Juli 2025
Sirus

Sirus I-Amp 8.150T Manual

30 Juli 2025
AER

AER Colourizer 2 Manual

30 Juli 2025
Sirus

Sirus I-Amp 1.300T Manual

30 Juli 2025
PAC

PAC AP4-FD32 Manual

30 Juli 2025
CYP

CYP PUV-1540S-RX Manual

30 Juli 2025
ART

ART USB Dual Pre Manual

29 Juli 2025
SSL

SSL Pure Drive Quad Manual

29 Juli 2025
SSL

SSL Pure Drive Octo Manual

29 Juli 2025
CYP

CYP PUV-1550SRX Manual

29 Juli 2025