Panasonic H-ES35100 Manual

Panasonic Linse H-ES35100

Læs gratis den danske manual til Panasonic H-ES35100 (2 sider) i kategorien Linse. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Panasonic H-ES35100, eller vil du spørge andre brugere om produktet?

Side 1/2
[India Only]
Information on hazardous constituents as specified in sub-rule1 of rule16 in electrical and electronic
equipment.
Declaration of Conformity with the requirements of the E-Waste (Management) Amendment Rules,
2023 with the sub-rule1 of rule16 limits with respect to Lead, Mercury, Cadmium, Hexavalent chromium,
Polybrominated biphenyls, Polybrominated diphenyl ethers.
The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of
the E-Waste (Management) Amendment Rules, 2023:
2. Cadmium (Cd) – not over 0.01% by weight.
3. Mercury (Hg) – not over 0.1% by weight.
4. Hexavalent chromium (Cr6+) – not over 0.1% by weight.
5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight.
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.
For the purpose of recycling to facilitate effective utilization of resources, please return this
product to a nearby authorized collection center, registered dismantler of recycler, or
Panasonic service center when disposing of this product.
Customer care number ( Toll free ) : 1800 103 1333 ,1800 108 1333
Please see the Panasonic website for further information on collection centers, etc. or call
the customer care toll-free number
https://www.panasonic.com/in/corporate/e-waste-management.html
Do's & Don’ts
No.
Do's Don'ts
1
All electrical and electronic products are
required to be handed over only to the
Authorized recycler.
The product should not be opened by the user
himself /herself, but only by authorized service
personnel.
2
The product should be handed over only to
authorized recycler for disposal.
The product is not meant for re-sale to any
unauthorized agencies / scrap dealers /
kabariwalas.
3
Keep the product in an isolated area, after it
becomes non-functional / unrepairable so as to
prevent its accidental breakage.
The product is not meant for mixing into
household waste stream.
4
Refer to Operating Instructions for handling of
end of life products
Do not keep any replaced spare part(s) from
the product in an exposed area.
5
Always dispose of products that have reached
end of life at Panasonic Life Solutions India
Authorized Service Centre.
Do not donate old electronic items to anybody.
Do not dispose of your product in garbage bins
along with municipal waste that ultimately
reaches landfill.
6
Wherever possible or as instructed, separate
the packaging material according to
responsible waste disposal options and sorting
for recycling.
Do not give e-waste to informal and
unorganized sectors like Local Scrap Dealers /
Rag Pickers.
[For_Australia]
Panasonic Warranty
1.
Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on
the product, without charge for parts or labour, if in the opinion of Panasonic the product is found to have a
manufacturing defect within one (1) year or (12 months) (the “warranty period”) from the date of purchase appearing
on your purchase receipt.
2. This warranty only applies to Panaso ld by Panasonic Australia, it’s Authorised nic products purchased in Australia and so
Distributors, or Dealers, and only where the products are used and serviced within Australia or its territories. Warranty
cover only applies to the services that are carried out by a Panasonic Authorised Service Centre and only if valid proof
of purchase is presented when the warranty service is requested.
3. This warranty only applies if the product has been installed and/or used in accordance with the manufacturer’s
recommendations (as noted in the operating instructions) under normal use and reasonable care (in the opinion of
Panasonic). The warranty does not cover damage, malfunction or failure resulting from use of incorrect voltages,
incorrect installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls,
mains supply problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised
persons (including unauthorised alterations), exposure to abnormally corrosive conditions, or any foreign object or
matter having entered the product.
4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Consumable parts
(b) Cosmetic parts
(c) Worn or damaged parts
(d) Information stored on Hard Disk Drives, Optical Discs, USB Devices, SD Cards, Tapes
(e) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s)
5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will
not cover:
(a) Internet and or DLNA connection / setup related problems
(b) Access fees and or charges incurred for internet connection
(c) Incompatible software or software not specifically stipulated in the product operations manual; and
(d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to
the internet or any other device.
6. To claim warranty service, when required, you should:
Contact Panasonic’s Customer Care Centre on 132 600 for Service Centre information.
Confirm the opening and acceptance times with the Authorised Service centre that you choose.
Then send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase
receipt.
Any freight and insurance costs associated with the transport of the product to and/or from your nearest
Authorised Service Centre must be arranged and paid for by you.
7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-
installation or re-installation of a product, including costs related to the mounting, de-mounting or remounting of any
screen, (and any other ancillary activities), delivery, handling, freighting, transportation or insurance of the product or
any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason of,
during, associated with, or related to such installation, de-installation, re-installation or transit.
Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia,
however, coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your
product, please telephone our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.
In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be
excluded under the Australian Consumer Law. If there is a major failure with the product, you can reject the product and
elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated
for the drop in value of the goods. You are also entitled to have the product repaired or replaced if the product fails to be
of acceptable quality and the failure does not amount to a major failure.
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable
period by contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic
may choose to repair or replace the product and will do so in a reasonable period of time from receiving notice from you.
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic
Australia website
www.panasonic.com.au
or
contact by phone on
132 600
If phoning in, please ensure you have your operating instructions available.
Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
www.panasonic.com.au
PRO-031-F11 Issue: 5.0 23-01-2018
E
GC
Operating Instructions
INTERCHANGEABLE LENS FOR
DIGITAL CAMERA
Manuel d’utilisation
OBJECTIF INTERCHANGEABLE POUR
APPAREIL PHOTO NUMÉRIQUE
Bedienungsanleitung
WECHSELOBJEKTIV FÜR
DIGITAL-KAMERA
Instrucciones de funcionamiento
ÓPTICA INTERCAMBIABLE PARA
CÁMARA DIGITAL
Istruzioni per l’uso
LENTI INTERCAMBIABILI PER
FOTOCAMERA DIGITALE
使用說明書
使用說明書
使用說明書
使用說明書使用說明書
數位相機用可替換鏡
數位相機用可替換鏡
數位相機用可替換鏡
數位相機用可替換鏡數位相機用可替換鏡
Инструкция по эксплуатации
СМЕННЫЙ ОБЪЕКТИВ ДЛЯ
ЦИФРОВОЙ ФОТОКАМЕРЫ
Model No./Modèle/Model Nr./Modelo N./
Modello N./
型號
型號
型號
型號型號
/ .Модель
H-ES35100
Manufactured by:
Panasonic Entertainment & Communication Co., Ltd.
1-10-12, Yagumo-higashi-machi, Moriguchi City, Osaka, Japan
Importer for UK:
Panasonic UK, a branch of Panasonic Marketing Europe GmbH
Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT
Importer for EU:
Panasonic Marketing Europe GmbH
Hagenauer Strasse 43, 65203 Wiesbaden, Germany
Authorized Representative in EU:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Fabriqué par:
Panasonic Entertainment & Communication Co., Ltd.
1-10-12, Yagumo-higashi-machi, ville de Moriguchi, Osaka,
Japon
Importateur:
Panasonic Marketing Europe GmbH
Hagenauer Strasse 43, 65203 Wiesbaden, Allemagne
Représentant autorisé dans l’UE:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hambourg, Allemagne
Hergestellt von:
Panasonic Entertainment & Communication Co., Ltd.
1-10-12, Yagumo-higashi-machi, Moriguchi City, Osaka, Japan
Importeur:
Panasonic Marketing Europe GmbH
Hagenauer Strasse 43, 65203 Wiesbaden, Deutschland
Vertretungsberechtigter in der EU:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Deutschland
Fabricado por:
Panasonic Entertainment & Communication Co., Ltd.
1-10-12, Yagumo-higashi-machi, Ciudad de Moriguchi, Osaka,
Japón
Importador:
Panasonic Marketing Europe GmbH
Hagenauer Strasse 43, 65203 Wiesbaden, Alemania
Representante Autorizado para la UE:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburgo, Alemania
Fabbricato da:
Panasonic Entertainment & Communication Co., Ltd.
1-10-12, Yagumo-higashi-machi, Città di Moriguchi, Osaka, Giappone
Importatore:
Panasonic Marketing Europe GmbH
Hagenauer Strasse 43, 65203 Wiesbaden, Germania
Rappresentante autorizzato nell’UE:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Amburgo, Germania
Panasonic Entertainment
& Communication Co., Ltd.
Web Site/Site Web: http://www.panasonic.com
Panasonic Entertainment
& Communication Co., Ltd.
2023
1
DVZE1046Z
2
3
4
DZE4HES35100Z
VFC4605
VFC4430
6 71 2 3 4 5
1
Thank you for purchasing Panasonic product.
Please read these instructions carefully before using this product, and
save this manual for future use.
The lens can be used with a digital camera compatible with the lens
mount standard for the Micro Four Thirds
TM
System.
It cannot be mounted on the Four Thirds
TM
mount specification camera.
For smoother recording, we recommend updating the firmware of the
digital camera/lens to the latest version.
For the latest information on the firmware or to download/update the
firmware, visit the following support website:
https://panasonic.jp/support/global/cs/dsc/
(English only)
Micro Four Thirds
TM
and Micro Four Thirds Logo marks are trademarks or
registered trademarks of OM Digital Solutions Corporation, in Japan, the
United States, the European Union and other countries.
Four Thirds
TM
and Four Thirds Logo marks are trademarks or
registered trademarks of OM Digital Solutions Corporation, in Japan,
the United States, the European Union and other countries.
LEICA is a registered trademark of Leica Microsystems IR GmbH.
ELMARIT is a registered trademark of Leica Camera AG. The LEICA
DG lenses are manufactured using measurement instruments and
quality assurance systems that have been certified by Leica Camera
AG based on the company’s quality standards.
Other names, company names, product names mentioned in this document
are trademarks or registered trademarks of the companies concerned.
The appearance and specifications of products described in this
document may differ from the actual products you have purchased
due to later enhancements.
Keep the unit as far away as possible from electromagnetic
equipment (such as microwave ovens, TVs, video games, radio
transmitters, high-voltage lines etc.).
Do not use the camera near cell phones because doing so may result
in noise adversely affecting the pictures and sound.
If the camera is adversely affected by electromagnetic equipment and
stops functioning properly, turn the camera off and remove the battery
and/or the connected AC adaptor. Then reinsert the battery and/or
reconnect the AC adaptor and turn the camera on.
-If you see this symbol-
Information for Your Safety
Disposal of Old Equipment
Only for European Union and countries with recycling systems
This symbol on the products, packaging, and/or accompanying
documents means that used electrical and electronic products
must not be mixed with general household waste.
For proper treatment, recovery and recycling of old
products, please take them to applicable collection
points in accordance with your national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling, please contact
your local authority.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
2
3
4
ENGLISH
Handling of the lens
When using this lens, take care not to drop, bump, or apply
undue force to it. Doing so may cause malfunction or damage to
this lens and the digital camera.
Images may be affected by dust, dirt, and soiling (water, oil,
fingerprints, etc.) on the lens surface. Before and after recording, use
a blower to blow off dust and dirt from the surface of the lens, then
lightly wipe with a soft dry cloth to remove soiling.
When the lens is not in use, be sure to attach the lens cap and lens rear cap
to prevent dust and other particles from accumulating on or entering the lens.
To protect the lens contact points 1, do not do the following. These
may cause malfunction.
(See illustration )
Touch the lens contact points.
Allow the lens contact points to become dirty.
Place the lens with its mount surface facing down.
Dust and splash resistant
Splash Resistant and Dust Resistant are terms used to describe
an extra level of protection this lens offers against exposure to a
minimal amount of moisture, water or dust. These terms do not
guarantee that damage will not occur if this lens is subjected to
direct contact with water or dust infiltration.
Take the following precautions to provide satisfactory dust and
splash resistant performance. If the lens is not working properly,
consult the dealer or Panasonic.
Attach to a digital camera that is dust and splash resistant.
When attaching or removing the lens, be careful so that foreign
objects such as sand, dust, and water droplets do not adhere to or
enter the lens mount rubber, contact points, digital camera and lens.
If the lens is exposed to water droplets or other liquids, wipe them
off with a soft, dry cloth.
To improve the dust and splash resistant performance of the lens, a
lens mount rubber is used in the mount.
The lens mount rubber will leave scuff marks on the digital camera
mount, but this does not impact performance.
For information on changing the lens mount rubber, contact Panasonic.
Condensation (when the lens is fogged up)
Condensation occurs when the ambient temperature or humidity changes.
Please be careful, as it may cause lens stains, mold and malfunction.
If condensation occurs, turn off the digital camera and leave it for approx. 2
hours. The fog will disappear naturally when the temperature of the digital
camera becomes close to the ambient temperature.
Check that all the accessories are supplied before using the product.
Product numbers correct as of August 2023. These may be subject to change.
1Lens pouch
2Lens cap
¢
3Lens rear cap
¢
4Lens hood
¢Fitted to the lens at the time of purchase.
1Lens surface
2Focus ring
Rotates the focus ring to focus when set to MF (Manual Focus).
You can set the amount of movement for focusing using the focus
ring with the menus in compatible digital cameras. Refer to the
operating instructions for the digital camera for details.
3Zoom ring
Zooms to telephoto or wide-angle.
4O.I.S. switch
The stabilizer function is set to activate if the O.I.S. switch is set to [ON].
We recommend setting the O.I.S. switch to [OFF] when using a tripod.
5Contact points
6Lens mount rubber
7Lens fitting mark
Note
There may be differences in focus when you use zoom after focusing.
Focus again.
While shooting video, in some situations, AF operation and stabilizer
operation of the lens may be heard. It is recommended to record as follows:
Set to MF to record
Turn off the image stabilizer and use a tripod for recording
For information on how to attach the lens, refer to the operating
instructions for your digital camera.
Attach the lens after turning off the digital camera.
Attach the lens after removing the lens rear cap. (See illustration )
After removing the lens from the digital camera, be sure to attach the
lens cap and lens rear cap to prevent dust and other particles from
accumulating on or entering the lens.
Attaching the lens hood (See illustration )
1Align mark A
A
A
AA ( ) on the lens hood with the mark on the tip
of the lens.
2
Rotate the lens hood in the direction of the arrow to align mark
B
B
B
BB
( ) on the lens hood with the mark on the tip of the lens.
Attach the lens hood by rotating it until it clicks.
Removing the lens hood (See illustration )
Rotate the lens hood in the direction of the arrow and then remove it.
Note
When carrying, the lens hood can be attached in the reverse
direction. (See illustration )
Precautions
B
Supplied Accessories
C
Names and Functions of Components
D
Attaching the Lens
It is recommended to remove the lens hood during flash photography
as the lens hood can block the light from the flash.
To prevent dropping of the lens, you should never carry the lens by
just holding the lens hood.
Notes on filter use
It is possible to attach the lens cap or the lens hood with the filter
already attached.
There may be some vignetting in recorded images if multiple filters
are attached simultaneously.
It is not possible to attach any items other than filters such as a conversion
lens or adaptor to the front of the lens and use it in combination with this lens.
Lens damage may result if such items are attached.
Do not spray the lens with insecticides or volatile chemicals.
If such substances get onto the lens they can damage the exterior
case or cause the paint to peel.
Do not point the lens at the sun or other strong light sources.
This may cause the lens to collect an excessive amount of light,
resulting in fire and malfunction.
Do not use while directly touching the lens at low temperatures
for a long period of time.
In cold places (environments below 0 o oC (32 F), such as ski
slopes), prolonged direct contact with the lens may cause skin
injury. Use gloves or similar when using the lens for long periods.
When cleaning, wipe lightly using a soft dry cloth that does not
produce dust.
Do not use solvents such as benzine, thinners, alcohol, kitchen
cleansers, etc., as this can cause problems such as deformation of
the casing or peeling of the coating.
Do not use wipes with chemicals.
Do not keep products made of rubber, PVC or similar materials in
contact with the lens for a long period of time.
Do not disassemble or alter this product.
When the lens is not going to be used for a prolonged period, we
recommend storing with a desiccant (silica gel).
Check all the parts before recording when you have not used the lens
for a long period of time.
Avoid using or storing the lens in any of the following locations as this
may cause problems in operation or malfunctioning:
In direct sunlight or on a beach in summer
In locations with high temperatures and humidity levels or severe
changes in temperature and humidity
In sandy or dusty locations
Where there is fire
Near heaters, air conditioners or humidifiers
Where water may make the lens wet
Where there is vibration
Inside a vehicle
Refer also to the operating instructions for the digital camera.
This is the sound of the internal lenses moving or the aperture
operating. It is not a malfunction.
The specifications are subject to change for performance
enhancement.
INTERCHANGEABLE LENS FOR DIGITAL CAMERA
“LEICA DG VARIO-ELMARIT 35-100mm/F2.8/POWER O.I.S.”
Cautions for Use
Troubleshooting
A rattling sound, etc. is heard when the digital camera is turned
on or off or the lens is shaken.
There is a sound from the lens when taking pictures.
Specifications
Mount
Micro Four Thirds Mount
Focal length
f=35 mm to 100 mm (35 mm film camera equivalent: 70 mm to
200 mm)
Lens construction
18 elements in 13 groups (1 UED lens, 2 ED lenses)
Aperture type
7 diaphragm blades/circular aperture diaphragm
Maximum aperture
F2.8
Minimum aperture value
F22
Angle of view
34x (Wide) to 12x (Tele)
In focus distance
0.85 m (2.8 feet) to
(from the focus distance reference line)
Maximum image magnification
0.1k (35 mm film camera equivalent: 0.2k)
Optical Image Stabilizer
Yes
Filter diameter
58 mm
Maximum diameter
q67.4 mm (2.7 )
Overall length
Approx. 99.9 mm (3.9q) (from the tip of the lens to the base side of
the lens mount)
Mass (Weight)
Approx. 360 (0.79 lb)g
Merci d’avoir fait l’achat d’un produit Panasonic.
Veuillez lire attentivement les présentes instructions avant d’utiliser ce
produit, et conserver ce manuel pour utilisation ultérieure.
L'objectif peut être utilisé de pair avec un appareil photo numérique
compatible avec l'objectif à monture standard pour le système Micro
Four Thirds
TM
(Micro Quatre Tiers).
Il ne peut pas être monté sur les appareils à monture Four Thirds
TM
(Quatre Tiers).
Pour un enregistrement plus fluide, nous vous conseillons de mettre à
jour la version du micrologiciel de l’appareil photo numérique/objectif.
Pour les plus récentes informations sur le micrologiciel ou pour le
télécharger/mettre à jour, visitez le site d’assistance suivant :
https://panasonic.jp/support/global/cs/dsc/
(En anglais uniquement)
Micro Four Thirds
TM
(Micro Quatre Tiers) et le logo Micro Four Thirds
sont des marques de commerce ou des marques déposées d’OM
Digital Solutions Corporation au Japon, aux États-Unis, en Union
européenne et dans d’autres pays.
Four Thirds
TM
(Quatre Tiers) et le logo Four Thirds sont des marques de
commerce ou des marques déposées d’OM Digital Solutions Corporation
au Japon, aux États-Unis, en Union européenne et dans d’autres pays.
LEICA est une marque déposée de Leica Microsystems IR GmbH.
ELMARIT est une marque déposée de Leica Camera AG. Les
objectifs DG de LEICA sont fabriqués avec des instruments de
mesure homologués par Leica Camera AG et des systèmes de
contrôle de la qualité fondés sur des normes approuvées par Leica.
Les autres noms, raisons sociales et appellations de produits cités
dans ce document sont des marques de commerce ou des marques
déposées de leurs détenteurs respectifs.
L’apparence et les spécifications des produits décrits dans ce document
peuvent être différentes de celles des produits que vous avez réellement
achetés, en raison des améliorations apportées ultérieurement.
Évitez d’approcher l’élément de tout équipement magnétisé (four
à micro-ondes, téléviseur, équipement de jeux vidéo, émetteur
radio, ligne à haute tension, etc.).
N’utilisez pas l’appareil photo à proximité d’un téléphone cellulaire;
cela pourrait entraîner un bruit nuisible à l’image et au son.
Advenant le cas où le fonctionnement de l’appareil serait dérangé par un
champ magnétique, coupez le contact, retirez la batterie ou débranchez
l’adaptateur secteur pour ensuite soit remettre la batterie en place, soit
rebrancher l’adaptateur. Remettez l’appareil en marche.
-Si vous voyez ce symbole-
Manipulation de l’objectif
Lorsque vous utilisez cet objectif, veillez à ne pas le faire tomber, le
cogner ou appuyer trop fort dessus. Dans le cas contraire, cela
pourrait endommager ou causer le dysfonctionnement de cet
objectif et de l’appareil photo numérique.
Les images peuvent être affectées par la poussière, la saleté et les
salissures (eau, gras, empreintes de doigt) présentes sur la surface de la
lentille. Avant et après l’enregistrement, utilisez un souffleur pour éliminer
la poussière et la saleté de la surface de la lentille, puis essuyez-la
légèrement avec un chiffon doux et sec pour éliminer les salissures.
Lorsque l’objectif n’est pas utilisé, veillez à mettre en place le capuchon
d’objectif et le capuchon d’objectif arrière pour empêcher la poussière et
autres particules de s’y accumuler ou de pénétrer à l’intérieur de celui-ci.
Pour protéger les points de contact de l’objectif
1
, ne faites pas ce qui suit
car cela pourrait causer un dysfonctionnement. (Voir illustration )
Toucher les points de contact de l’objectif.
Laisser les points de contact se salir.
Poser l’objectif sur sa surface de montage.
Résistance à la poussière et aux éclaboussures
Résistance à la poussière et aux éclaboussures est utilisée pour
décrire le niveau supplémentaire de protection qu'offre cet
objectif contre l'exposition à une quantité minimale d'humidité,
d'eau ou de poussière. Elle ne garantit pas que des dommages
ne surviendront pas si cet objectif est soumis au contact direct
de l'eau ou à une infiltration de poussière.
Respectez les précautions suivantes pour que les performances
de résistance à la poussre et aux éclaboussures soient
satisfaisantes. Si l’objectif ne fonctionne pas correctement,
contactez le revendeur ou Panasonic.
Installez-le sur un appareil photo numérique qui résiste à la
poussière et aux éclaboussures.
Lors de la mise en place ou du retrait de l’objectif, veillez à ce
qu’aucun corps étranger tel que du sable, de la poussière ou des
gouttes d’eau, n’adhère au caoutchouc de la monture, aux points
de contact, à l’appareil photo numérique et à l’objectif.
Si l’objectif est exposé à des éclaboussures d’eau ou à d’autres
liquides, essuyez le liquide à l’aide d’un chiffon doux et sec.
Pour améliorer les performances de résistance à la poussière et aux
éclaboussures de l’objectif, un joint en caoutchouc est intégdans la
monture de l’objectif.
Le joint en caoutchouc de l’objectif laisse des marques sur la
monture de l’appareil photo numérique, mais cela n’a aucune
incidence sur les performances.
Pour en savoir plus sur le remplacement du joint en caoutchouc de
la monture de l’objectif, contactez Panasonic.
Condensation (lorsque l’objectif est embué)
Il y a formation de condensation lorsque la température ambiante ou
le taux d’humité change. Faites attention, car cela pourrait créer des
taches, de la moisissure et causer un dysfonctionnement.
En cas de condensation, mettez l’appareil photo hors marche et
laissez-le ainsi pendant environ 2 heures. La buée disparaît
naturellement lorsque la température de l’appareil photo numérique
se rapproche de celle ambiante.
Vérifiez que tous les accessoires sont fournis avant d’utiliser le produit.
Les numéros de produit sont corrects à compter d’août 2023. Ceux-ci sont
susceptibles d’être modifiés.
1Étui pour objectif
2Protège-objectif
¢
3Capuchon arrière d’objectif
¢
4Parasoleil
¢Installé sur l’objectif au moment de l’achat.
1Surface de l’objectif
2Bague de mise au point
Tournez afin de mettre au point lors de la prise de photos en mise
au point manuelle (MF).
Vous pouvez régler l'amplitude de mouvement de la mise au point
en utilisant la bague de focus avec les menus des appareils photo
numériques compatibles. Consultez le mode d’emploi de l'appareil
photo numérique pour avoir des détails.
3Bague de zoom
Tournez pour
zoomer vers téléphoto ou grand-angle.
Dust and splash resistant
Yes
Recommended operating temperature
j o o o o10 C to 40 C (14 F to 104 F)
Permissible relative humidity
10 %RH to 80 %RH
Précautions à prendre
Élimination des équipements usagés
Applicable uniquement dans les pays membres de l’Union
européenne et les pays disposant de systèmes de recyclage.
Apposé sur le produit lui-même, sur son emballage, ou figurant
dans la documentation qui l’accompagne, ce pictogramme
indique que les appareils électriques et électroniques usagés
doivent être séparés des ordures ménagères.
Afin de permettre le traitement, la valorisation et le
recyclage adéquats des appareils usagés, veuillez les
porter à l’un des points de collecte prévus,
conformément à la législation nationale en vigueur.
En les éliminant conformément à la réglementation en vigueur,
vous contribuez à éviter le gaspillage de ressources
précieuses ainsi qu’à protéger la santé humaine et l’environnement.
Pour de plus amples renseignements sur la collecte et le recyclage,
veuillez vous renseigner auprès des collectivités locales.
Le non-respect de la réglementation relative à l’élimination des
déchets est passible d’une peine d’amende.
Précautions
B
Accessoires fournis
C
Noms et fonctions des composants
FRANÇAIS
4Commutateur O.I.S. (S.O.I.)
La fonction du stabilisateur est réglée pour s'activer si le
commutateur O.I.S. (S.O.I.) est réglé sur [ON].
Nous vous conseillons de régler le commutateur O.I.S. (S.O.I.) sur [OFF]
(NON) lorsque vous utilisez un trépied.
5Points de contact
6Garniture en caoutchouc de l’objectif
7Repère pour la mise en place de l’objectif
Nota
Il pourrait y avoir des différences de mise au point lorsque vous utilisez le
zoom après avoir fait la mise au point. Refaites la mise au point.
Si le bruit du fonctionnement
de la mise au point automatique
et celui du
stabilisateur vous ennuie durant un enregistrement vidéo, il est
conseillé d'enregistrer en effectuant ce qui suit :
Régler sur MPM pour enregistrer
Désactiver le stabilisateur de l’image et utiliser un trépied pour enregistrer
Pour de plus amples informations sur la manière d’installer l’objectif,
consultez le manuel d’utilisation de l’appareil photo numérique.
Installez l’objectif après avoir mis l’appareil photo numérique hors marche.
Installez l’objectif après avoir retiré le capuchon d’objectif arrière.
(Voir illustration )
Après avoir retiré l’objectif de l’appareil photo numérique, veillez à
mettre en place le capuchon d’objectif et le capuchon d’objectif
arrière pour empêcher la poussière et autres particules de s’y
accumuler ou de pénétrer à l’intérieur de celui-ci.
Fixation du parasoleil (Voir illustration )
1Alignez le repère A ( ) présent sur le parasoleil sur le
repère situé à l’extrémité de l’objectif.
2Faites tourner le parasoleil dans le sens de la flèche pour
aligner le rere B ( ) présent sur le parasoleil sur le
repère situé à l’extrémité de l’objectif.
Installez le parasoleil en le faisant tourner jusqu’à ce qu’il clique.
Retrait d’un parasoleil
(Voir illustration )
Tournez le parasoleil dans le sens de la flèche pour le retirer.
Nota
Pendant le transport, le parasoleil peut être fixé en sens inverse. (Voir
illustration )
Il est conseillé de retirer le parasoleil lorsque le flash est utilisé car il
peut bloquer la lumière provenant de ce dernier.
Pour éviter de laisser tomber l’objectif, il ne faut jamais le porter en le
tenant simplement par le parasoleil.
Remarques sur l’utilisation d’un filtre
Il est possible d’installer le capuchon d’objectif ou le parasoleil avec le
filtre déjà en place.
Il pourrait se produire un effet de vignetage sur les images
enregistrées si plusieurs filtres sont utilisés simultanément.
Il n’est pas possible d’installer des éléments autres que des filtres, tel
qu’une lentille de conversion ou un adaptateur, à l’avant de l’objectif
et de les utiliser avec ce dernier.
L’objectif pourrait être endommagé si de tels éléments sont mis en place.
Ne pulvérisez pas d’insecticides ou de substances chimiques
volatiles sur l’objectif.
Si de telles substances atteignent l’objectif, celui-ci pourrait être
endommagé, ou la peinture pourrait s’écailler.
Ne pointez pas l’objectif vers le soleil ou d’autres sources
intenses de lumière.
L’objectif pourrait recueillir une quantité excessive de lumière,
causant un feu et un dysfonctionnement.
Ne touchez pas directement l’objectif durant un long moment
lorsque la température est basse.
Dans les endroits froids (température ambiante en-dessous de 0
o
C
(32
o
F), comme sur les pistes de ski), le contact direct et prolongé avec
l'objectif peut causer des blessures. Utilisez des gants ou quelque
chose de similaire pour utiliser l'objectif durant un long moment.
Lors du nettoyage, essuyez délicatement avec un chiffon doux
et sec sans peluche.
N’utilisez pas de solvants comme le benzène, des diluants, de
l’alcool, des détergents de cuisine, etc., car cela pourrait déformer
le boîtier ou décoller le revêtement.
Ne pas utiliser de lingettes chimiques.
Ne laissez pas de produits en caoutchouc, PVC ou matériaux
similaires au contact de l’objectif pendant longtemps.
Ne démontez pas et n’altérez pas ce produit.
Si l’objectif ne doit plus être utilisé pendant une période prolongée, nous
vous conseillons de le ranger avec un produit déshydratant (gel de silice).
Vérifiez tous les éléments avant d’enregistrer si vous n’avez pas
utilisé l’objectif depuis longtemps.
Évitez d’utiliser ou de ranger l’objectif dans l’un des endroits suivants car cela
pourrait causer des problèmes durant l’utilisation ou des dysfonctionnements :
À la lumière directe du soleil ou sur la plage en été
Dans des endroits soumis à des températures et à des taux d’humidité
élevés ou à d’importantes variations de température et d’humidité
Dans des endroits sablonneux ou poussiéreux
Où il y a du feu
Près de radiateurs, climatiseurs, humidificateurs
Là où l’eau est susceptible de mouiller l’objectif
Où il y a des vibrations
À l’intérieur d’un véhicule
Consultez également le manuel d’utilisation de l’appareil photo.
Il s'agit du bruit que fait le déplacement des lentilles internes ou le
fonctionnement de l'ouverture. Ce n'est pas un dysfonctionnement.
Ces spécifications peuvent être soumises à des changements pour de
meilleures performances.
OBJECTIF INTERCHANGEABLE POUR APPAREIL PHOTO NURIQUE
“LEICA DG VARIO-ELMARIT 35-100mm/F2.8/S.O.I. PUISSANT”
D
Mise en place de l’objectif
Précautions d’utilisation
Dépannage
Un cliquetis, etc., se fait entendre lorsque l’appareil photo
numérique est mis en/hors marche ou lorsque l’objectif est secoué.
Il y a un bruit provenant de l’objectif lors des prises de vues.
Spécifications
Monture
Monture Micro Quatre Tiers (Micro Four Thirds)
Longueur focale
f=35 mm à 100 mm (
Équivalent à un film de 35 mm
: 70 mm à 200 mm)
Construction de l’objectif
18 éléments dans 13 groupes (1 lentille UED, 2 lentilles ED)
Type de diaphragme
7 lamelles de diaphragme/diaphragme à ouverture circulaire
Ouverture maximale
F2.8
Valeur d’ouverture minimum
F22
Angle de vue
34x (Grand-angle) à 12o (Téléobjectif)
Distance de mise au point
0,85 m (2,8 pi) à (à partir de la ligne de référence de la distance de
mise au point)
Grossissement maximum de l’image
0,1k (Équivalent à un film de 35 mm : 0,2k)
Stabilisateur optique de l’image
Oui
Diamètre filtre
58 mm
Diamètre maximum
67,4 mm (2,7 po)
Longueur totale
Environ 99,9 mm (3,9 po) (du bout de l’objectif à la base de la
monture de l’objectif)
Poids
Environ 360 g (0,79 lb)
Résistance à la poussière et aux éclaboussures
Oui
Température de fonctionnement recommandée
j o o o o10 C à 40 C (14 F à 104 F)
Humidité relative admissible
10 %RH à 80 %RH
Vielen Dank für Ihren Kauf dieses Panasonic-Produkts.
Bitte lesen Sie diese Anleitung vor der Inbetriebnahme dieses Produkts
aufmerksam durch, und bewahren Sie dieses Handbuch für spätere
Bezugnahme griffbereit auf.
Das Objektiv kann mit einer Digital-Kamera verwendet werden, welche
mit dem Objektivanschluss-Standard für das Micro Four
Thirds
TM
-System kompatibel ist.
Objektive dieser Ausführung lassen sich nicht auf Kameras mit
Four-Thirds
TM
-Bajonett aufsetzen.
Zum reibungslosen Aufnehmen wird empfohlen, die Firmware von
Digital-Kamera/Objektiv auf die neueste Version zu aktualisieren.
Um aktuelle Informationen zur Firmware einzusehen oder die
Firmware herunterzuladen, rufen Sie die unten aufgeführte
Support-Website auf:
https://panasonic.jp/support/global/cs/dsc/
(Nur Englisch)
Micro Four Thirds
TM
und die für Micro Four Thirds verwendeten Logos
sind Markenzeichen oder eingetragene Markenzeichen der OM Digital
Solutions Corporation in Japan, den USA, der EU und anderen Ländern.
Four Thirds
TM
und die für Four Thirds verwendeten Logos sind
Markenzeichen oder eingetragene Markenzeichen der OM Digital
Solutions Corporation in Japan, den USA, der EU und anderen Ländern.
LEICA ist ein eingetragenes Markenzeichen der Leica Microsystems IR
GmbH. ELMARIT ist ein eingetragenes Markenzeichen der Leica
Camera AG. Die Herstellung der LEICA DG-Objektive erfolgt unter
Verwendung von Messinstrumenten und Qualitätssicherungssystemen,
die von der Leica Camera AG auf Grundlage der Qualitätsstandards des
Unternehmens zertifiziert wurden.
Andere Namen, Unternehmens- und Produktbezeichnungen, welche
in diesem Dokument genannt werden, sind Markenzeichen oder
eingetragene Markenzeichen der jeweiligen Unternehmen.
Das Erscheinungsbild und die technischen Daten der in dieser
Bedienungsanleitung beschriebenen Produkte können aufgrund von
Weiterentwicklungen vom tatsächlichen Produkt abweichen.
Halten Sie das Gerät so weit wie möglich von Geräten und
Einrichtungen fern, die elektromagnetische Felder erzeugen (wie
Mikrowellengeräte, Fernsehgeräte, Videospielgeräte, Funksender,
Hochspannungsleitungen usw.).
Verwenden Sie die Kamera nicht in der Nähe von Mobiltelefonen. Es
könnten sonst Bild- und Tonstörungen auftreten.
Wenn die Kamera durch elektromagnetische Felder anderer Geräte
gestört wird und Fehlfunktionen auftreten, schalten Sie die Kamera
aus. Nehmen Sie den Akku heraus und/oder trennen Sie das
Netzadapter ab. Setzen Sie den Akku dann wieder ein und/oder
stecken Sie das Netzadapter wieder ein und schalten Sie die Kamera
ein.
-Bedeutung des nachstehend abgebildeten Symbols-
Handhabung des Objektivs
Achten Sie bei der Verwendung dieses Objektivs darauf, dass es
nicht herunterfällt und keinen Stößen und übermäßiger
Krafteinwirkung ausgesetzt wird. Andernfalls kann es zu
Funktionsstörungen oder Schäden an diesem Objektiv und der
Digital-Kamera kommen.
Die Bilder können durch Staub, Schmutz und Verschmutzungen
(Wasser, Öl, Fingerabdrücke usw.) auf der Linsenoberfläche
beeinträchtigt werden. Verwenden Sie vor und nach dem Aufnehmen
einen Blasebalg, um Staub und Schmutz von der Oberfläche des
Objektivs zu entfernen, und wischen Sie es dann vorsichtig mit einem
weichen, trockenen Tuch ab, um Verschmutzungen zu entfernen.
Wenn das Objektiv nicht verwendet wird, bringen Sie den vorderen
und hinteren Objektivdeckel an, damit sich keine Staub- oder
anderen Partikel auf der Linse oder im Objektiv ansammeln.
Um die Kontaktpunkte 1 des Objektivs zu schützen, vermeiden Sie
Folgendes. Anderenfalls kann es zu Fehlfunktionen kommen.
(
Siehe Abbildung
)
Kontaktpunkte des Objektivs berühren.
Zulassen, dass die Kontaktpunkte des Objektivs verschmutzen.
Das Objektiv mit der Fassung nach unten ablegen.
Staub- und Spritzwasserschützt
Die Bezeichnung "staub- und spritzwassergeschützt" bezieht
sich auf ein zusätzliches Schutzniveau dieses Objektivs gegen
das Eindringen minimaler Mengen von Feuchtigkeit/Wasser und
Staub. Diese Bezeichnung bedeutet keine Garantie gegen
Beschädigungen, wenn dieses Objektiv direktem Kontakt mit
eindringendem Wasser oder Staub ausgesetzt wird.
Treffen Sie die folgenden Vorsichtsmaßnahmen, um einen
angemessenen Staub- und Spritzwasserschutz zu
gewährleisten. Wenn das Objektiv nicht richtig funktioniert,
wenden Sie sich an Ihren Händler oder an Panasonic.
Bringen Sie das Objektiv an eine Digitalkamera an, die staub-
und spritzwasserdicht ist.
Achten Sie beim Anbringen und Entfernen des Objektivs darauf,
dass keinerlei Fremdmaterial wie Sand, Staub, Wassertropfen usw.
auf Objektivfassungsgummi, Kontaktpunkte, Digital-Kamera und
Objektiv gelangen.
Wenn das Objektiv Spritzwasser oder anderen Flüssigkeiten ausgesetzt
wurde, wischen Sie es mit einem weichen, trockenen Tuch ab.
Zur Verbesserung der Staub- und Spritzwasserdichtigkeit des
Objektivs ist ein Objektivfassungsgummi am Bajonett angebracht.
Durch das Objektivfassungsgummi kommt es zu Schleifspuren an der
Digital-Kamera. Dadurch wird die Leistung jedoch nicht beeinträchtigt.
Für Informationen zum Austausch des Objektivfassungsgummis
wenden Sie sich bitte an Panasonic.
Kondensation (Beschlagen des Objektivs)
Kondensation tritt auf, wenn sich Umgebungstemperatur oder
Luftfeuchtigkeit ändern. Seien Sie vorsichtig, da dies Ablagerungen am
Objektiv, Schimmelbildung und Funktionsstörungen verursachen kann.
Wenn Kondensation auftritt, schalten Sie die Digital-Kamera aus und
warten ca. 2 Stunden lang. Die Kondensation hört von selbst auf, wenn sich
die Digital-Kameratemperatur an die Umgebungstemperatur annähert.
Informationen für Ihre Sicherheit
Entsorgung von Altgeräten und Batterien
Nur für die Europäische Union und Länder mit
Recyclingsystemen
Dieses Symbol auf den Produkten, der Verpackung und/
oder den Begleitdokumenten bedeutet, dass gebrauchte
elektrische und elektronische Produkte sowie Batterien
nicht in den allgemeinen Hausmüll gegeben werden dürfen.
Bitte führen Sie alte Produkte und verbrauchte Batterien
zur Behandlung, Aufarbeitung bzw. zum Recycling
gemäß den gesetzlichen Bestimmungen den
zuständigen Sammelpunkten zu.
Zusätzlich ist die Rückgabe unter bestimmten
Voraussetzungen auch bei Vertreibern (Verkaufsfläche
für Elektro- und Elektronikgeräte von mindestens 400 m² und
Lebensmitteleinzelhändler, die über eine Gesamtverkaufsfläche von
mindestens 800 m² verfügen und mehrmals im Kalenderjahr oder
dauerhaft auch Elektro- und Elektronikgeräte anbieten und auf dem
Markt bereitstellen) möglich. Die Rücknahme hat kostenlos beim
Kauf eines gleichartigen Neugerätes zu erfolgen (1:1 Rücknahme).
Unabhängig davon, gibt es die Möglichkeit, die Altgete kostenlos
an den Vertreiber zurückzugeben (0:1 Rücknahme; Abmessungen
kleiner als 25 cm und weniger als drei Altgeräte).
Vertreiber, die unter Verwendung von Fernkommunikationsmitteln
ihre Produkte verkaufen, sind zur Rücknahme von Altgeräten
verpflichtet, wenn die Lager- und Versandflächen für Elektro- und
Elektronikgeräte mindestens 400 m² betragen.
Onlineverzeichnis der Sammel- und Rücknahmestellen:
https://www.ear-system.de/ear-verzeichnis/sammel-und-ruecknahmestellen.
Enthalten die Produkte Batterien und Akkus oder Lampen, die aus
dem Altgerät zerstörungsfrei entnommen werdennnen, sind Sie
als Endnutzer gesetzlich dazu verpflichtet, diese vor der Entsorgung
zu entnehmen und getrennt als Batterie bzw. Lampe zu entsorgen.
Batterien können zusätzlich im Handelsgeschäft unentgeltlich
zurückgegeben werden.
Indem Sie diese Produkte und Batterien ordnungsgemäß entsorgen,
helfen Sie dabei, wertvolle Ressourcen zu schützen und eventuelle
negative Auswirkungen, insbesondere beim Umgang mit
lithiumhaltigen Batterien, auf die menschliche Gesundheit und die
Umwelt zu vermeiden.
Für mehr Informationen zu Sammlung und Recycling, wenden Sie
sich bitte an Ihren örtlichen Abfallentsorgungsdienstleister.
Gemäß Landesvorschriften können wegen nicht ordnungsgemäßer
Entsorgung dieses Abfalls Strafgelder verhängt werden.
Datenschutz
Wir weisen alle Endnutzer von Elektro- und Elektronikaltgeräten
darauf hin, dass Sie für das Löschen personenbezogener Daten auf
den zu entsorgenden Altgeräten selbst verantwortlich sind.
Hinweis für das Batteriesymbol (Symbol unten):
Dieses Symbol kann in Kombination mit einem
chemischen Symbol abgebildet sein. In diesem Fall erfolgt
dieses auf Grund der Anforderungen derjenigen
Richtlinien, die für die betreffende Chemikalie erlassen
wurden.
Vermeidung von Störungen
DEUTSCH
Überprüfen Sie, ob sämtliches Zubehör mitgeliefert wurde, bevor Sie
das Produkt verwenden.
Die Produktnummern beziehen sich auf den Stand von August 2023.
Änderungen sind vorbehalten.
1Objektivbeutel
2Objektivdeckel
¢
3Hinterer Objektivdeckel
¢
4Gegenlichtblende
¢Zum Kaufzeitpunkt am Objektiv angebracht.
1Linsenfläche
2Schärfenring
In der MF (manueller Fokus)-Einstellung drehen Sie zum
Scharfstellen den Fokusring.
In den Menüs kompatibler Digitalkameras können Sie den Umfang der
Bewegung beim Scharfstellen mit dem Fokusring einstellen. Einzelheiten
finden Sie in der Bedienungsanleitung Ihrer Digitalkamera.
3Zoom-Ring
Ermöglicht das Zoomen in die Tele- oder Weitwinkelstellung.
4O.I.S.-Schalter
Wenn der O.I.S.-Schalter auf [ON] eingestellt ist, wird die
Stabilisatorfunktion aktiviert.
Es empfiehlt sich, den O.I.S.-Schalter auf [OFF] zu stellen, wenn Sie ein
Stativ verwenden.
5Kontaktpunkt
6Objektivfassungsgummi
7Markierung zum Ansetzen des Objektivs
Hinweis
Der Schärfepunkt kann sich verschieben, wenn Sie nach der
Scharfstellung den Zoom benutzen. Wiederholen Sie die Scharfstellung.
Wenn das Betriebsgeräusch von AF und Stabilisator bei der Videoaufnahme
störend ist, wird empfohlen, die Aufnahme wie folgt durchzuführen:
Wählen Sie zum Aufnehmen die Einstellung MF aus
Schalten Sie den Bildstabilisator aus und verwenden Sie ein Stativ
für die Aufnahme
Informationen zum Aufsetzen des Objektivs finden Sie in der
Bedienungsanleitung Ihrer Digitalkamera.
Setzen Sie das Objektiv nach dem Ausschalten der Digitalkamera auf.
Setzen Sie das Objektiv nach dem Abnehmen des hinteren
Objektivdeckels auf. (Siehe Abbildung )
Nachdem Sie das Objektiv von der Digitalkamera abgenommen haben,
bringen Sie den vorderen und hinteren Objektivdeckel an, damit sich keine
Staub- oder anderen Partikel auf der Linse oder im Objektiv ansammeln.
Gegenlichtblende aufsetzen
(Siehe Abbildung )
1Richten Sie die Markierung A ( ) an der Gegenlichtblende
mit der Markierung am Rand des Objektivs aus.
2
Drehen Sie die Gegenlichtblende in Pfeilrichtung, bis die
Markierung
B
( ) an der Gegenlichtblende an der
Markierung am Objektivrand ausgerichtet ist.
Bringen Sie die Gegenlichtblende an, indem Sie sie drehen, bis
ein Klicken zu hören ist.
Gegenlichtblende aufsetzen
(Siehe Abbildung )
Drehen Sie die Gegenlichtblende in Pfeilrichtung, um sie abzunehmen.
Hinweis
Beim Transport kann die Gegenlichtblende in umgekehrter Richtung
angebracht werden. (Siehe Abbildung )
Es wird empfohlen, bei Blitzlichtaufnahmen die Gegenlichtblende
abzunehmen, da diese das Blitzlicht möglicherweise blockiert.
Um ein Herunterfallen des Objektivs zu vermeiden, sollten Sie das
Objektiv beim Tragen niemals nur an der Gegenlichtblende festhalten.
Hinweise zur Verwendung von Filtern
Es ist möglich, den Objektivdeckel und die Gegenlichtblende bei
bereits aufgesetzten Filtern zu verwenden.
Beim gleichzeitigen Anbringen mehrerer Filter kann es zu
Abschattungen in den aufgenommenen Bildern kommen.
Außer Filtern können keine anderen Objekte – etwa Vorsatzlinsen
oder Adapter – vor dem Objektiv angebracht und in Kombination mit
diesem Objektiv verwendet werden.
Durch Anbringen solcher Objekte kann es zu Beschädigungen des
Objektivs kommen.
Sprühen Sie keine Insektizide oder flüchtige Chemikalien auf
das Objektiv.
Falls solche Substanzen auf das Objektiv gelangen, könnten sie zur
Beschädigung des Objektivs oder zum Abblättern der Farbe führen.
Richten Sie das Objektiv nicht gegen die Sonne oder andere
starke Lichtquellen.
Das Objektiv könnte zu viel Licht aufnehmen, was zu Bränden oder
Fehlfunktionen führen kann.
Nicht verwenden, während das Objektiv bei niedrigen
Temperaturen über längere Zeiträume direkt berührt wird.
In kalten Umgebungen (unter 0 oC, z. B. auf Skipisten) kann ein
längeres Berühren des Objektivs zu Hautverletzungen führen.
Tragen Sie Handschuhe o. ä., wenn Sie das Objektiv über einen
längeren Zeitraum hinweg verwenden.
Verwenden Sie beim Reinigen vorsichtige Wischbewegungen
mit einem weichen, trockenen und staubfreien Tuch.
Verwenden Sie zur Reinigung des Geräts keine Lösungsmittel wie
Waschbenzin, Verdünner, Alkohol, Küchenreiniger etc., da diese
zur Verformung des Gehäuses oder zum Ablösen der
Beschichtung führen können.
Verwenden Sie keine mit Chemikalien getränkten Reinigungstücher.
Gegenstände aus Gummi, PVC oder ähnlichen Materialien dürfen
nicht für längere Zeit mit dem Objektiv in Berührung kommen.
Verändern und zerlegen Sie dieses Produkt nicht.
Wenn das Objektiv über einen längeren Zeitraum nicht benutzt wird,
wird die Lagerung mit einem Trockenmittel (Kieselgel) empfohlen.
Wenn das Objektiv über längere Zeit nicht benutzt wurde, überprüfen
Sie vor einer Aufnahme alle Teile des Objektivs.
Verwenden Sie die Gegenlichtblende nicht unter den folgenden
Bedingungen und lagern Sie sie auch nicht unter den folgenden
Bedingungen, da es ansonsten zu Bedienproblemen und
Funktionsstörungen kommen kann:
Bei direktem Sonnenlicht oder im Sommer an der Küste
An Orten mit hohen Temperaturen, hoher Feuchtigkeit oder starken
Temperatur-/Feuchtigkeitsschwankungen
An sandigen oder staubigen Orten
Bei einem Brand
In der Nähe von Heizkörpern, Klimaanlagen oder Luftbefeuchtern
Wenn das Objektiv durch Wasser nass werden kann
Wo Erschütterungen vorhanden sind
In einem Fahrzeug
Siehe auch die Bedienungsanleitung der Digitalkamera.
Dieses Geräusch entsteht durch die Bewegung der inneren Linsen oder
die Betätigung der Blende. Es handelt sich nicht um eine Fehlfunktion.
Die Spezifikationen können zur Leistungsverbesserung ohne
Ankündigung geändert werden.
WECHSELOBJEKTIV FÜR DIGITAL-KAMERA
“LEICA DG VARIO-ELMARIT 35-100mm/F2.8/POWER O.I.S.”
B
Beiliegendes Zubehör
C
Bezeichnungen und Funktionen der
einzelnen Kamerateile
D
Aufsetzen des Objektivs
Vorsichtsmaßnahmen
Fehlerbehebung
Beim Ein- oder Ausschalten der Digitalkamera oder beim
Schütteln des Objektivs ist ein Rattern o. ä. zu hören.
Beim Aufnehmen von Bildern ist ein Geräusch aus dem Objektiv zu hören.
Spezifikationen
Fassung
Micro Four Thirds-Anschluss
Brennweite
f=35 mm bis 100 mm (Kleinbild-Äquivalent: 70 mm bis 200 mm)
Objektivaufbau
18 Elemente in 13 Gruppen (1 UED-Linse, 2 ED-Linsen)
Blende
7 Blendenlamellen/Runde Blende
Maximale Blendenöffnung
F2.8
Minimale Blende
F22
DVQX2423ZA
F0823KN0
Gracias por comprar un producto Panasonic.
Lea cuidadosamente estas instrucciones antes de usar este producto,
y guarde este manual para usarlo en el futuro.
La lente puede ser usada con una cámara digital compatible con el
estándar de montaje de lente del sistema Micro Four Thirds
TM
.
No se puede montar en una cámara con estándar de soporte Four Thirds
TM
.
Para una grabación más uniforme, se recomienda que actualice el
firmware de la cámara digital/lente con la versión más reciente.
Para la información s reciente sobre el firmware o para descargarlo/
actualizarlo, visite la siguiente página de atención al cliente:
https://panasonic.jp/support/global/cs/dsc/
(Solo en inglés)
El logotipo Micro Four Thirds
TM
y Micro Four Thirds son marcas
comerciales o marcas comerciales registradas de OM Digital Solutions
Corporation, en Japón, Estados Unidos, la Unión Europea y otros países.
El logotipo Four Thirds
TM
y Four Thirds son marcas comerciales o
marcas comerciales registradas de OM Digital Solutions Corporation,
en Japón, Estados Unidos, la Unión Europea y otros países.
LEICA es una marca registrada de Leica Microsystems IR GmbH.
ELMARIT es una marca registrada de Leica Camera AG. Los
objetivos LEICA DG se fabrican usando instrumentos de medida y
sistemas de garantía de calidad certificados por Leica Camera AG en
base a los estándares de calidad de la compañía.
Otros nombres, nombres de empresas y nombres de producto
mencionados en este documento son marcas comerciales o marcas
comerciales registradas de las empresas en cuestión.
La apariencia y las especificaciones de los productos descritos en
este documento pueden diferir de los productos reales comprados
debido a posteriores mejoras.
Mantenga la unidad lo más lejos que sea posible de equipos
electromagnéticos (como hornos de microondas, televisores,
vídeo juegos, trasmisores radio, líneas de alto voltaje, etc.).
No utilice la cámara cerca de teléfonos móviles, p2-ya que lo de hacerlo puede
producir ruido que afectará negativamente a las imágenes y el sonido.
Si la cámara queda afectada negativamente por un equipo electromagnético
y deja de funcionar correctamente, apague la cámara y quite la batería y/o el
adaptador de CA conectado. Luego vuelva a insertar la batería y/o vuelva a
conectar el adaptador de CA y encienda la cámara.
-Si ve este símbolo-
Manipulación de la lente
Al utilizar esta lente, tenga cuidado de no dejarla caer, golpearla
o aplicar una fuerza excesiva sobre ella. Hacerlo podría causar
un mal funcionamiento o daños en la lente y la cámara digital.
Las imágenes pueden verse afectadas por el polvo y la suciedad
(agua, aceite, huellas dactilares, etc.) de la superficie de la lente.
Antes y después de grabar, use un soplador para eliminar el polvo y
la suciedad de la superficie de la lente y luego limpie ligeramente con
un paño suave y seco para eliminar la suciedad.
Cuando la lente no esté en uso, asegúrese de colocar la tapa de la
lente y la tapa trasera de la lente para evitar que el polvo y otras
partículas se acumulen en la lente o entren en ella.
Para proteger los puntos de contacto de la lente
1
, no haga lo siguiente,
ya que podría causar un mal funcionamiento. (Ver ilustración )
Tocar los puntos de contacto de la lente.
Dejar que los puntos de contacto de la lente se ensucien.
Colocar la lente con la superficie de montaje hacia abajo.
Resistencia al polvo y a las salpicaduras
Resistencia al polvo y a las salpicaduras es un término que se utiliza
para describir un nivel adicional de protección que esta lente ofrece
frente a la exposición a una cantidad mínima de humedad, agua y polvo.
Este término no garantiza que no se produzcan daños si esta lente se
somete a contacto directo con agua o infiltración de polvo.
Tome las siguientes precauciones para un rendimiento satisfactorio de
resistencia al polvo y a las salpicaduras. Si la lente no funciona
correctamente, consulte con su distribuidor o con Panasonic.
Móntela en una cámara digital que sea resistente al polvo y a
las salpicaduras.
Al colocar o quitar la lente, tenga cuidado de que materiales extraños
como arena, polvo o gotas de agua no se adhieran a la lente o entren en
la goma de montaje, los puntos de contacto, la cámara digital y la lente.
Si la lente quedara expuesta a gotas de agua u otros líquidos,
séquela con un paño suave seco.
Para mejorar la resistencia al polvo y a las salpicaduras de la lente,
en la montura se utiliza una goma de montaje de la lente.
La goma de montaje de la lente dejará marcas de roce en la
montura de la cámara digital, pero esto no afecta al desempeño.
Para obtener información sobre cómo cambiar la goma de montaje
de la lente, póngase en contacto con Panasonic.
Condensación (cuando las lentes están empañadas)
La condensación se produce cuando la temperatura ambiente o la
humedad cambia. Tenga cuidado con la condensación, p2-ya que podría
provocar manchas y moho en la lente y producirse un mal funcionamiento.
Si se produce condensación, apague la cámara digital y déjela aprox.
2 horas. La neblina desaparecerá naturalmente cuando la temperatura
de la cámara digital se aproxime a la temperatura ambiente.
Antes de usar el producto, compruebe que estén suministrados todos
los accesorios.
Números de productos correctos a partir de agosto de 2023. Pueden
estar sujetos a cambio.
1Estuche de la lente
2Tapa de la lente
¢
3Tapa trasera de la lente
¢
4Parasol
¢Acoplado a la lente al momento de la compra.
1Superficie del objetivo
2Anillo del enfoque
Gire el anillo de enfoque para enfocar cuando esté en MF (enfoque manual).
Puede ajustar lo que se mueve el enfoque utilizando el anillo de
enfoque con los menús de cámaras digitales compatibles. Consulte las
instrucciones de funcionamiento de la cámara digital para más detalles.
3Anillo de zoom
Hace zoom hasta teleobjetivo o gran angular.
4Interruptor O.I.S.
La función del estabilizador se configura como activa si el
interruptor O.I.S. está en la posición [ON].
Le recomendamos que ajuste el interruptor O.I.S. a [OFF] cuando usa
un trípode.
5Punto de contacto
6Goma de montaje de la lente
7Marca para ajustar la lente
Nota
Puede haber diferencias en el enfoque cuando se usa el zoom
después de enfocar. Enfoque de nuevo.
Si el sonido del funcionamiento AF y del estabilizador le molesta durante la
grabación de vídeo, se recomienda grabar de la siguiente manera:
Ajuste en MF para grabar
Apague el estabilizador de imagen y utilice un trípode para grabar
Para obtener información sobre cómo colocar la lente, consulte
las instrucciones de funcionamiento de su cámara digital.
Coloque la lente después de apagar la cámara digital.
Coloque la lente después de quitar la tapa trasera de la lente.
(Ver ilustración )
Después de quitar la lente de la cámara digital, asegúrese de colocar
la tapa de la lente y la tapa trasera de la lente para evitar que el polvo
y otras partículas se acumulen en la lente o entren en ella.
Unión de la visera del objetivo
(Ver ilustración )
1Alinee la marca A ( ) en la visera de la lente con la marca
en el extremo de la lente.
2
Gire el parasol en la dirección de la flecha para alinear la marca
B
( ) del parasol con la marca en el extremo de la lente.
Monte el parasol girándolo hasta que haga clic.
Cómo desmontar un parasol (Ver ilustración )
Gire la visera del objetivo en la dirección de la flecha para quitarla.
Nota
Cuando transporte la cámara, puede colocar la visera de la lente en
la dirección inversa. (Ver ilustración )
Se recomienda retirar la visera de la lente al realizar fotografías con
flash, p2-ya que la visera de la lente puede bloquear la luz del flash.
Para evitar que la lente se caiga, nunca debe transportarla
simplemente sujetando la visera de la lente.
Notas sobre el uso de filtros
Se puede colocar la tapa de la lente o la visera de la lente con el filtro p2-ya puesto.
Si se colocan varios filtros simultáneamente, podría producirse
viñeteado en las imágenes grabadas.
No es posible colocar en la parte frontal de la lente, y utilizarlo en
combinación con ella, otro elemento que no sea un filtro, como una
lente de conversión o un adaptador.
La lente podría dañarse si se colocan tales objetos.
No rocíe la lente con insecticidas o productos químicos volátiles.
Si dichas substancias caen en el objetivo, éstas pueden dañarlo o
hacer desconchar su barniz.
No apunte con el objetivo al sol u otras fuentes de luz intensa.
Esto podría hacer que el objetivo recogiera demasiada luz, lo que
podría provocar un incendio y una avería.
No la utilice si va a tocar directamente la lente a bajas
temperaturas durante un periodo de tiempo prolongado.
En lugares fríos (entornos por debajo de 0 o oC (32 F), como las
pistas de esquí), el contacto directo prolongado con la lente puede
provocar lesiones en la piel. Use guantes o algo similar cuando
utilice la lente durante periodos largos.
Al limpiar, limpie ligeramente con un paño suave y seco que no
produzca polvo.
No utilice disolventes como gasolina, diluyentes, alcohol, detergentes
para cocina, etc., ya que podrían causar problemas como la
deformación de la carcasa o el desprendimiento del revestimiento.
No utilice toallitas con productos químicos.
No deje productos de goma, PVC o materiales similares en contacto
directo con la lente durante un largo periodo.
No desarme ni altere este producto.
Cuando la lente no se vaya a usar durante un periodo de tiempo
prolongado, se recomienda guardarla con un desecante (gel delice).
Compruebe todas las partes antes de comenzar a grabar cuando no
haya usado la lente durante un periodo de tiempo prolongado.
Evite usar o guardar la lente en cualquiera de las siguientes ubicaciones,
ya que esto podría causar problemas en el funcionamiento o fallas:
Bajo la luz directa del sol o bien a lo largo de la costa durante el verano
En ubicaciones con altas temperaturas y altos niveles de humedad
o cambios bruscos de temperatura y humedad
En lugares arenosos o polvorientos
Donde haya llamas
Cerca de calefactores, acondicionadores de aire o humedecedores
Donde el agua pueda mojar la lente
Donde haya vibraciones
Dentro de un vehículo
Consulte además las instrucciones de funcionamiento de la cámara digital.
Este es el sonido de las lentes internas moviéndose o de la
operación de apertura. No se trata de un funcionamiento defectuoso.
Las especificaciones están sujetas a cambios para la mejora del rendimiento.
ÓPTICA INTERCAMBIABLE PARA CÁMARA DIGITAL
“LEICA DG VARIO-ELMARIT 35-100mm/F2.8/POWER O.I.S.”
Grazie per aver acquistato un prodotto Panasonic.
Leggere attentamente queste istruzioni prima di utilizzare il presente
prodotto, e conservare questo manuale per usi futuri.
Questo obiettivo può essere usato con una fotocamera digitale con
attacco compatibile con lo standard Micro Four Thirds
TM
System.
Non montabile su una fotocamera con specifiche sul supporto Four Thirds
TM
.
Per un utilizzo ottimale, raccomandiamo di aggiornare il firmware
della fotocamera digitale/obiettivo alla versione più recente.
Per le informazioni più recenti sul firmware o per scaricare/aggiornare
il firmware, visitare il seguente sito web del supporto:
https://panasonic.jp/support/global/cs/dsc/
(solo in inglese)
Micro Four Thirds
TM
e il logo Micro Four Thirds sono marchi o marchi
registrati di OM Digital Solutions Corporation, in Giappone, negli Stati
Uniti, nell’Unione Europea e in altri paesi.
Four Thirds
TM
e il logo Four Thirds sono marchi o marchi registrati di
OM Digital Solutions Corporation, in Giappone, negli Stati Uniti,
nell’Unione Europea e in altri paesi.
LEICA è un marchio registrato di Leica Microsystems IR GmbH.
ELMARIT è un marchio registrato di Leica Camera AG. Gli obiettivi
LEICA DG sono prodotti utilizzando strumenti di misurazione e
sistemi di garanzia della qualità certificati da Leica Camera AG in
base agli standard di qualità dell’azienda.
Altri nomi, nomi di aziende, nomi di prodotti contenuti in questo
documento sono marchi o marchi registrati delle relative aziende.
Laspetto e le specifiche dei prodotti descritti in questo documento
possono differire rispetto ai prodotti effettivi acquistati a causa dei
miglioramenti apportati in seguito.
Tenere l’unità il più possibile lontana da apparecchi elettromagnetici
(come forni a microonde, TV, videogiochi, radiotrasmittenti, linee
dell’alta tensione, ecc.).
Non utilizzare la fotocamera vicino a telefoni cellulari, perché ciò può
causare disturbi che influenzano negativamente immagini e suoni.
Se il funzionamento della fotocamera digitale è disturbato da apparecchi
elettromagnetici, spegnere la fotocamera e rimuovere la batteria e/o
l’adattatore CA collegato. Quindi inserire nuovamente la batteria e/o
ricollegare l’adattatore CA. Infine, riaccendere la fotocamera.
-Se vedete questo simbolo-
Utilizzo dell’obiettivo
Quando si usa questo obiettivo, fare attenzione che non cada e
che non subisca urti e non applicare forza eccessiva su di esso.
In caso contrario si potrebbero provocare malfunzionamenti o
danni all’obiettivo ed alla fotocamera digitale.
Le immagini possono essere influenzate da polvere, sporco e macchie
(acqua, olio, impronte digitali, ecc.) sulla superficie della lente. Prima e dopo
la registrazione, usare un soffietto per rimuovere polvere e sporco dalla
superficie della lente, quindi strofinare delicatamente con un panno morbido
asciutto per rimuovere lo sporco.
Quando non si usa l’obiettivo, fissare il copriobiettivo ed il
copriobiettivo posteriore per evitare che polvere ed altre particelle si
accumulino sull’obiettivo o entrino al suo interno.
Per proteggere i punti di contatto dell’obiettivo
1
, non fare quanto segue.
Queste azioni potrebbero provocare malfunzionamenti. (Vedere la figura )
Toccare i punti di contatto dell’obiettivo.
Lasciare che i punti di contatto dell’obiettivo si sporchino.
Posizionare l’obiettivo con la sua superficie di innesto rivolta verso il basso.
Resistenza alla polvere ed agli schizzi
Resistenza alla polvere ed agli schizzi sono termini utilizzati per
descrivere un ulteriore livello di protezione offerto da questo obiettivo,
contro l'esposizione a minime quantità di umidità, acqua o polvere.
Questi termini non garantiscono che l'obiettivo non subisca danni
qualora venga a diretto contatto con l'acqua o con infiltrazioni di polvere.
Prendere le seguenti precauzioni per garantire prestazioni soddisfacenti
in termini di resistenza alla polvere ed agli schizzi. Se l’obiettivo non
funziona correttamente, contattare il rivenditore o Panasonic.
Installare su una fotocamera digitale resistente alla polvere ed agli schizzi.
Quando si installa o si rimuove l’obiettivo, fare attenzione che
materiali estranei come sabbia, polvere, e goccioline di acqua non
aderiscano o penetrino nella gomma sull’innesto dell’obiettivo, nei
punti di contatto, nella fotocamera digitale e nell’obiettivo.
Se l’obiettivo viene esposto a goccioline d’acqua o altri liquidi,
rimuoverle con un panno asciutto morbido.
Per migliorare le prestazioni dell’obiettivo in termini di resistenza alla
polvere ed agli schizzi, sull’innesto dell’obiettivo è presente una
protezione in gomma.
La gomma sull’innesto dell’obiettivo lascerà segni di striscio sull’innesto
della fotocamera digitale, ma questo non influisce sulle prestazioni.
Per informazioni sulla sostituzione della protezione in gomma
sull’innesto dell’obiettivo, contattare Panasonic.
Condensa (quando l’obiettivo è appannato)
La condensa si forma quando cambia la temperatura ambiente o
l’umidità. Fare attenzione, in quanto può causare macchie, muffa e
malfunzionamento dell’obiettivo.
Se si verifica della condensa, spegnere la fotocamera digitale ed attendere
circa 2 ore. La condensa scomparirà naturalmente quando la temperatura
della fotocamera digitale si avvicinerà a quella dell’ambiente.
Controllare che tutti gli accessori siano in dotazione prima di utilizzare il
prodotto.
I codici dei prodotti sono aggiornati ad agosto 2023. È possibile che
subiscano delle modifiche.
1Borsa per l'obiettivo
2Copriobiettivo
¢
3Copriobiettivo posteriore
¢
4Paraluce
¢Installato sull’obiettivo al momento dell’acquisto.
1Superficie dell’obiettivo
2Ghiera di messa a fuoco
Ruotare la ghiera di messa a fuoco per mettere a fuoco quando
l’impostazione è MF (messa a fuoco manuale).
È possibile impostare quanto si sposta la messa a fuoco usando la
ghiera di messa a fuoco con i menu nelle fotocamere digitali
compatibili. Per ulteriori informazioni consultare le istruzioni per
l’uso della fotocamera digitale.
3Ghiera dello zoom
Consente di zoomare su telefoto o grandangolo.
4Interruttore O.I.S.
La funzione stabilizzatore è impostata in modo da attivarsi se il
selettore O.I.S. è posizionato su [ON].
Si consiglia di posizionare l’interruttore O.I.S. su [OFF] quando si
utilizza un treppiede.
5Punto di contatto
6Protezione in gomma sull’innesto dell’obiettivo
7Segno per l’installazione dell’obiettivo
Nota
Possono esserci differenze nella messa a fuoco quando si usa lo
zoom dopo la messa a fuoco. Mettere nuovamente a fuoco.
Se il suono di funzionamento della messa a fuoco automatica e dello
stabilizzatore disturba durante la registrazione di video, si consiglia di
registrare come segue:
Impostare su MF per registrare
Disattivare lo stabilizzatore di immagine ed usare un treppiede per
la registrazione
Per informazioni su come installare l’obiettivo, consultare le
istruzioni per l’uso della propria fotocamera digitale.
Installare l’obiettivo dopo aver spento la fotocamera digitale.
Installare l’obiettivo dopo aver rimosso il copriobiettivo posteriore.
(Vedere la figura )
Dopo aver rimosso l’obiettivo dalla fotocamera digitale, accertarsi di
fissare il copriobiettivo ed il copriobiettivo posteriore per evitare che
polvere ed altre particelle si accumulino sull’obiettivo o entrino al suo
interno.
Installazione del paraluce (Vedere la figura )
1Allineare il segno A ( ) sul paraluce con il segno
sull’estremità dell’obiettivo.
2Ruotare il paraluce nella direzione della freccia per allineare
il segno B ( ) sul paraluce con il segno all’estremità
dell’obiettivo.
Installare il paraluce ruotandolo sino a che non si sente un clic.
Rimozione di un paraluce (Vedere la figura )
Ruotare il paraluce nella direzione indicata dalla freccia per rimuoverlo.
Nota
Durante il trasporto, è possibile montare il paraluce al contrario.
(Vedere la figura )
Si consiglia di rimuovere il paraluce durante l’uso del flash in quanto il
paraluce può bloccare la luce del flash.
Per evitare di far cadere l’obiettivo, non trasportare mai l’obiettivo
tenendo solo il paraluce.
Note sull’uso del filtro
È possibile installare il copriobiettivo o il paraluce con il filtro già installato.
Se vengono installati contemporaneamente più filtri, sulle immagini
registrate può apparire un effetto vignetta.
Non è possibile installare elementi diversi dai filtri, ad esempio
convertitori o adattatori, sulla parte anteriore dell’obiettivo ed usarli in
combinazione con questo obiettivo.
Se vengono installati elementi di questo tipo, l’obiettivo potrebbe
venire danneggiato.
Non spruzzare insetticidi o sostanze chimiche volatili sull’obiettivo.
Se tali sostanze vengono a contatto con l’obiettivo possono
danneggiarlo o provocare il distacco di vernice.
Non puntare direttamente l’obiettivo verso il sole o verso intense
sorgenti luminose.
L’obiettivo potrebbe raccogliere una quantità eccessiva di luce,
prendendo fuoco e rovinandosi.
Non usare toccando direttamente l’obiettivo a temperature
basse per lungo tempo.
In luoghi freddi (ambienti con temperatura inferiore a 0 oC, come
piste da sci), un contatto diretto prolungato con l'obiettivo potrebbe
causare lesioni cutanee. Utilizzare guanti o simili quando si utilizza
a lungo l'obiettivo.
Per la pulizia, strofinare delicatamente con un panno asciutto
che non produca polvere.
Non utilizzare solventi come benzina, diluenti, alcol, detergenti da
cucina, ecc. perché questo può causare problemi come la
deformazione del corpo o la rimozione della finitura esterna.
Non usare panni con sostanze chimiche.
Non tenere a lungo a contatto con l’obiettivo prodotti in plastica, PVC
o materiali simili.
Non smontare o modificare questo prodotto.
Quando l’obiettivo non verrà usato per un periodo prolungato, si
consiglia di riporlo con un essiccante (gel di silice).
Controllare tutte le parti prima di registrare quando non si è usato
l’obiettivo per un lungo periodo di tempo.
Evitare di usare o lasciare l’obiettivo in uno dei seguenti luoghi perché
questo può causare problemi operativi o malfunzionamento:
Esposta alla luce del sole, o in spiaggia d’estate
In luoghi caratterizzati da temperature e livelli di umidità elevati o
forti sbalzi di temperatura e umidità
In luoghi con sabbia o polvere
Dove sono presenti fiamme
Vicino a caloriferi, condizionatori o umidificatori
Dove l’acqua può bagnare l’obiettivo
Dove sono pre senti vibrazioni
All’interno di un’auto
Vedere anche le istruzioni per l’uso della fotocamera digitale.
Si tratta del suono del movimento delle lenti interne o del
funzionamento dell’apertura. Non si tratta di un malfunzionamento.
Le specifiche sono soggette a modifica per migliorare le prestazioni.
LENTI INTERCAMBIABILI PER FOTOCAMERA DIGITALE
“LEICA DG VARIO-ELMARIT 35-100mm/F2.8/POWER O.I.S.”
購買 Panasonic
使品前細閱讀這並保明書供日後使
鏡頭
Micro Four Thirds
TM
System
鏡頭口標準相數位
無法4/3
TM
(Four Thirds
TM
)接口的相機上
了更暢地拍攝將數位鏡頭的韌體更新最新/
需韌體最新資訊更新韌體請造訪下列支援網站/
https://panasonic.jp/support/global/cs/dsc/
版)
Micro Four Thirds
TM
Micro Four Thirds OM Digital Solutions
Corporation 在日本歐盟和其他國家商標或冊商標
Four Thirds
TM
Four Thirds OM Digital Solutions Corporation
在日本歐盟和其他國家商標或冊商標
LEICALeica Microsystems IR GmbH的註冊商標 ELMARITLeica
Camera AG 的註冊商標 LEICA DG 鏡頭是採Leica Camera AG
準認的測試儀器和品證體系生產的產
本文中提到其他名公司名品名稱皆為其各公司商標或冊商標
本文中所記述的產品外觀與規格可因日後的產品改良而與購買的
際產品不同
使本離磁
使本離磁
使本離磁
使本離磁使本離磁
如微波爐
如微波爐
如微波爐如微波爐
電視
電視
電視
電視電視
視訊
視訊
視訊
視訊視訊
無線電發
無線電發
無線電發
無線電發無線電發
線等
線等
線等
線等線等
勿在電話附近使用相否則會影聲音質量
如果於受帶磁設備影響而能正常工作先將其關閉取出電池
/
或斷
的電源供應器
新插入電池
/
電源供應器
鏡頭的使
鏡頭的使
鏡頭的使
鏡頭的使鏡頭的使
使鏡頭
使鏡頭
使鏡頭
使鏡頭使鏡頭
小心不
小心不
小心不
小心不小心不
撞擊或度施力
撞擊或度施力
撞擊或度施力
撞擊或度施力撞擊或度施力
否則可能造成本鏡頭
否則可能造成本鏡頭
否則可能造成本鏡頭
否則可能造成本鏡頭否則可能造成本鏡頭
和數位機故或損壞
和數位機故或損壞
和數位機故或損壞
和數位機故或損壞和數位機故或損壞
鏡頭表面塵和髒汙 指印等)會影影像
攝前後使吹塵除鏡頭表面的灰塵和用軟乾布輕輕
擦拭以清除髒汙
防止灰塵或其他微粒附著鏡頭不使用鏡頭請裝鏡頭蓋
鏡頭
護鏡頭1請避免下列動作否則可(見
觸碰鏡頭
讓鏡點沾
將安裝面朝下鏡頭
防濺
防濺
防濺
防濺防濺
防濺是指本鏡頭對於少量的濕氣
防濺是指本鏡頭對於少量的濕氣
防濺是指本鏡頭對於少量的濕氣
防濺是指本鏡頭對於少量的濕氣防濺是指本鏡頭對於少量的濕氣
塵具有防護
塵具有防護
塵具有防護
塵具有防護塵具有防護
如果
如果
如果
如果如果
鏡頭直接接觸水或有
鏡頭直接接觸水或有
鏡頭直接接觸水或有
鏡頭直接接觸水或有鏡頭直接接觸水或有
並不保不會發生損壞
並不保不會發生損壞
並不保不會發生損壞
並不保不會發生損壞並不保不會發生損壞
下列意事操作
下列意事操作
下列意事操作
下列意事操作下列意事操作
到所要的防防濺
到所要的防防濺
到所要的防防濺
到所要的防防濺到所要的防防濺
如果本鏡頭無
如果本鏡頭無
如果本鏡頭無
如果本鏡頭無如果本鏡頭無
法正確運
法正確運
法正確運
法正確運法正確運
經銷商或
經銷商或
經銷商或
經銷商或經銷商或 諮詢
諮詢
諮詢
諮詢諮詢
Panasonic
到可防濺機上
到可防濺機上
到可防濺機上
到可防濺機上到可防濺機上
心安移除鏡頭以免塵及水滴等異物附著鏡頭
定橡觸點數位機或鏡頭
如果鏡頭其他液體請用軟乾布將其擦去
改善鏡頭的防防濺接口使鏡頭接口橡
鏡頭接口數位接口下摩擦不會
更換鏡頭接口的資請與 Panasonic聯繫
水氣
水氣
水氣
水氣水氣
當鏡頭霧氣
當鏡頭霧氣
當鏡頭霧氣
當鏡頭霧氣當鏡頭霧氣
周圍度或化大時發生水氣請注以免
鏡頭變髒發霉及故
如果發生水氣請關閉數位將其放置約 小時數位2
度接周圍度時化將自然消
在使品之前請確認內是否提供了以下所有
品型號為 月所取後可會有2023 8
1鏡頭袋
2鏡頭蓋
¢
3鏡頭
¢
4鏡頭遮
¢購買時已安鏡頭
1鏡頭表面
2焦環
設為 MF手動對焦)動對焦環進行
使用相數位機內能表定使焦環的焦移
關詳細資數位使用說明書
3變焦環
變焦為遠攝或廣
4O.I.S. 開關
如果將 開關設定到O.I.S. [ON]會啟動定器功
使架時開關設定到O.I.S. [OFF]
5觸點
6鏡頭接口橡
7鏡頭
在對完成後變焦會有差請重新對
如果您介錄製
AF
定器操作聲音議用下列方式錄製
設為
MF
錄製
請關閉器並使架拍
如何安裝鏡頭的資訊
如何安裝鏡頭的資訊
如何安裝鏡頭的資訊
如何安裝鏡頭的資訊如何安裝鏡頭的資訊
數位使用說明書
數位使用說明書
數位使用說明書
數位使用說明書數位使用說明書
裝鏡頭
裝鏡頭
裝鏡頭
裝鏡頭裝鏡頭
關閉數位
關閉數位
關閉數位
關閉數位關閉數位
裝鏡頭先取下鏡頭(見
防止灰塵或其他微粒附著鏡頭從數位機上取下鏡頭後務
鏡頭蓋鏡頭
裝鏡頭遮
裝鏡頭遮
裝鏡頭遮
裝鏡頭遮裝鏡頭遮
1鏡頭遮
鏡頭遮
鏡頭遮
鏡頭遮鏡頭遮A
準鏡頭頂端的
準鏡頭頂端的
準鏡頭頂端的
準鏡頭頂端的準鏡頭頂端的
2箭頭示的方向鏡頭遮
箭頭示的方向鏡頭遮
箭頭示的方向鏡頭遮
箭頭示的方向鏡頭遮箭頭示的方向鏡頭遮
鏡頭遮
鏡頭遮
鏡頭遮
鏡頭遮鏡頭遮B
準鏡頭頂端的
準鏡頭頂端的
準鏡頭頂端的
準鏡頭頂端的準鏡頭頂端的
鏡頭遮出喀噠聲為止鏡頭遮
取下鏡頭遮
取下鏡頭遮
取下鏡頭遮
取下鏡頭遮取下鏡頭遮
著箭頭方向鏡頭遮以卸下
攜帶時可以用相方向安裝鏡頭遮(見
議用閃時取下鏡頭遮為鏡頭遮會擋住燈的
為避鏡頭鏡頭不可只握住鏡頭遮
濾鏡使用注意事
濾鏡使用注意事
濾鏡使用注意事
濾鏡使用注意事濾鏡使用注意事
即使已安裝濾鏡亦可再鏡頭蓋鏡頭遮
如果同時安多個濾鏡拍攝影像可現部分暈影效果
不可安裝除濾鏡以外任何品到鏡頭並搭配鏡頭使例如
鏡頭換器
如果安裝這類物會使鏡頭損壞
用殺蟲劑或揮性化學品噴灑鏡頭
用殺蟲劑或揮性化學品噴灑鏡頭
用殺蟲劑或揮性化學品噴灑鏡頭
用殺蟲劑或揮性化學品噴灑鏡頭用殺蟲劑或揮性化學品噴灑鏡頭
品接鏡頭會損表面會剝
勿將鏡頭或其他強光
勿將鏡頭或其他強光
勿將鏡頭或其他強光
勿將鏡頭或其他強光勿將鏡頭或其他強光
使頭聚集過致火和故
勿在低溫環境下間直接接觸鏡頭
勿在低溫環境下間直接接觸鏡頭
勿在低溫環境下間直接接觸鏡頭
勿在低溫環境下間直接接觸鏡頭勿在低溫環境下間直接接觸鏡頭
寒冷滑雪
0
o
C
間直接接觸鏡
會導致皮受傷使用鏡頭使手套或
清潔
清潔
清潔
清潔清潔
請用不會產生灰的軟乾布輕輕擦拭
請用不會產生灰的軟乾布輕輕擦拭
請用不會產生灰的軟乾布輕輕擦拭
請用不會產生灰的軟乾布輕輕擦拭請用不會產生灰的軟乾布輕輕擦拭
使汽油稀釋酒精廚房等溶否則
像是使外殼變形或使鍍膜
使化學物質
PVC 似材質的製與鏡頭長期接
勿拆或改
不使鏡頭在存放時放入一些乾(矽膠)
假如已未使用鏡頭在拍攝前先檢查所有
請避免在下列地使或儲存鏡頭為這會導操作失或故
方或夏天的海
高濕度或度有顯著
在多地方
靠近空調或加
在可濕鏡頭的地方
受到
數位使用說明書
是內部鏡頭移動或光圈操作的聲音
格可能隨更以改善效
數位可替換鏡頭
數位可替換鏡頭
數位可替換鏡頭
數位可替換鏡頭數位可替換鏡頭
“LEICA DG VARIO-ELMARIT 35-100mm/F2.8/POWER O.I.S.”
對於台
對於台
對於台
對於台對於台
Благодарим за приобретение продукции Panasonic.
Перед использованием этого изделия, пожалуйста, внимательно
прочитайте данные инструкции и сохраните это руководство для
дальнейшего использования.
Этот объектив можно использовать с цифровой фотокамерой, совместимой со
стандартом крепления объективов системы Micro Four Thirds
TM
.
Не предусмотрена его установка на фотокамеры со
спецификацией крепления Four Thirds
TM
.
Для беспроблемной записи рекомендуется обновить встроенное
программное обеспечение цифровой фотокамеры/объектива до
последней версии.
Чтобы узнать последнюю информацию о встроенном
программном обеспечении или /скачать обновить его, посетите
следующий веб-сайт поддержки:
https://panasonic.jp/support/global/cs/dsc/
( )Только на английском языке
Micro Four Thirds
TM
и знаки логотипа Micro Four Thirds являются
товарными знаками или зарегистрированными товарными
знаками OM Digital Solutions Corporation в Японии, Соединенных
Штатах, Европейском Союзе и других странах.
Four Thirds
TM
и знаки логотипа Four Thirds являются товарными
знаками или зарегистрированными товарными знаками OM
Digital Solutions Corporation в Японии, Соединенных Штатах,
Европейском Союзе и других странах.
LEICA является зарегистрированным товарным знаком Leica
Microsystems IR GmbH. ELMARIT является зарегистрированным
товарным знаком Leica Camera AG. Объективы LEICA DG
производятся с использованием измерительных приборов и
систем контроля качества, сертифицированных Leica Camera AG
на основе корпоративных требований к качеству.
Другие названия названия, компаний и изделий, упомянутые в этой
инструкции, являются товарными знаками или зарегистрированными
товарными знаками соответствующих компаний.
Внешний вид и технические характеристики изделий, описанных в данном
руководстве, могут отличаться от фактического вида и характеристик
приобретенных вами изделий вследствие их последующего улучшения.
Храните прибор вдали от источников электромагнитного излучения
(например, микроволновых печей, телевизоров, оборудования для
видеоигр, радиопередатчиков, высоковольтных линий и т.д.).
Не пользуйтесь фотокамерой вблизи сотовых телефонов, так как
телефоны могут вызвать помехи, отрицательно сказывающиеся
на качестве снимков и звука.
Если камера подвергается негативному влиянию электромагнитного
излучения и перестает работать нормально, выключите камеру,
извлеките батарею / и или подключенный сетевой адаптер переменного
тока вставьте. Затем снова батарею /и или снова подключите сетевой
адаптер переменного тока и включите камеру.
Обращение с объективом
При использовании этого объектива старайтесь не ронять,
не не него ударять его и нажимать на слишком сильно, так
как это может привести к неисправности или повреждению
объектива и цифровой фотокамеры.
В случае попадания на поверхность объектива пыли, грязи и
загрязнений (воды, масла, отпечатков пальцев и т. п.) качество
изображений может ухудшиться. Перед съемкой и после нее сдуйте
пыль и грязь с поверхности объектива с помощью щетки с грушей, а
затем осторожно удалите загрязнения сухой мягкой тканью.
Когда объектив не используется, наденьте на него крышку
объектива и заднюю крышку объектива, чтобы пылинки и другие
частицы не на скапливались объективе и не попадали внутрь.
Для защиты контактов объектива 1нельзя выполнять указанные
ниже действия. Они могут привести к неисправности.
( См. рисунок
)
Прикасаться к контактам объектива.
Допускать загрязнения контактов объектива.
Ставить объектив монтажной поверхностью вниз.
Пылезащищённость и брызгозащищенность
Пылезащищённость и брызгозащищенность это термины,
используемые для описания дополнительного уровня защиты
данного объектива от воздействия минимального количества
влаги, воды или пыли . Эти термины не гарантируют отсутствие
повреждений в случае прямого контакта данного объектива с
водой или проникновения в него пыли.
Соблюдайте указанные ниже меры предосторожности для
удовлетворительного характеристик действия пылезащищённости
и брызгозащищенности. Если объектив работает неправильно,
обратитесь в пункт продажи или компанию Panasonic.
Прикрепляйте объектив к пылезащищённой и
брызгозащищенной цифровой фотокамере.
Прикрепляя инородные или снимая объектив, следите за тем, чтобы
частицы, например песок, пыль и капли воды, не на попали
поверхность или проникли внутрь резинового уплотнительного кольца
объектива, контактов, цифровой фотокамеры и объектива.
Если на объектив попадут капли воды или иной жидкости,
вытрите их сухой мягкой тканью.
Для улучшения пылезащищённости и брызгозащищенности
объектива в месте прикрепления используется резиновое
уплотнительное кольцо объектива.
От резинового уплотнительного кольца объектива на
креплении цифровой фотокамеры остаются потертости, но это
не влияет на ее работу.
За информацией о замене резинового уплотнительного кольца
объектива обращайтесь в компанию Panasonic.
Конденсация (когда объектив затуманивается)
Конденсация происходит, когда окружающая температура или
влажность изменяются. Остерегайтесь конденсации, поскольку
она может вызвать появление пятен и плесени на объективе и
привести к неисправности.
Если произошла конденсация, выключите цифровую фотокамеру
и оставьте ее прибл. на 2 часа. Запотевание исчезнет само
собой, когда температура цифровой фотокамеры сравняется с
температурой окружающей .среды
Перед использованием изделия убедитесь, что все
принадлежности поставлены в комплекте.
Номера изделий верны по состоянию на август 2023 г. Они могут
изменяться.
1Чехол для объектива
2Крышка объектива
¢
3Задняя крышка объектива
¢
4Бленда объектива
¢Установлены на на объективе момент покупки.
1Поверхность линзы
2Кольцо фокусировки
При установке на MF (режим ручной фокусировки)
фокусировка выполняется вращением кольца фокусировки.
Степень перемещения при фокусировке с помощью кольца
фокусировки можно установить в меню совместимых
цифровых фотокамер. Подробную информацию см. в
инструкции по эксплуатации цифровой фотокамеры.
3Кольцо трансфокатора
Увеличение изображения в режиме телефото или
уменьшение в широкоугольном режиме.
4Переключатель O.I.S.
Функция стабилизатора включается при установке
переключателя O.I.S. на [ON].
При использовании штатива рекомендуется устанавливать
переключатель O.I.S. в положение [OFF].
5Монтажная поверхность
6Резиновое уплотнительное кольцо объектива
7Метка установки объектива
Примечание
При использовании функции увеличения после выполнения фокусировки
фокус может измениться. Выполните фокусировку повторно.
Если вас беспокоит звук работы автофокусировки и стабилизатора во время
видеосъемки, рекомендуется выполнять запись следующим образом:
Установить для съемки режим MF
Выключить стабилизатор изображения и использовать для
съемки штатив
Информацию о прикреплении объектива см. в инструкции по
эксплуатации цифровой фотокамеры.
Прежде чем прикреплять объектив, выключите цифровую
фотокамеру.
Прежде чем прикреплять объектив, снимите заднюю крышку
объектива. (См. рисунок )
Сняв объектив с цифровой фотокамеры, наденьте на него крышку
объектива и заднюю крышку объектива, чтобы пылинки и другие
частицы не скапливались на объективе и не попадали внутрь.
Присоединение бленды объектива (См.
рисунок )
1Совместите метку A ( ) на бленде объектива с меткой
на краю .объектива
2Поверните бленду объектива в направлении, указанном
стрелкой, совмещая метку B ( ) на бленде
объектива с меткой на краю объектива.
Присоедините бленду объектива, поворачивая ее до щелчка.
Снятие бленды объектива ( . См рисунок )
Чтобы снять бленду, поверните ее в направлении стрелки.
Примечание
При переноске бленду объектива можно прикрепить в обратном
направлении. (См. рисунок )
При съемке со вспышкой рекомендуется снять бленду объектива,
так как бленда объектива может загораживать свет от вспышки.
Чтобы не допустить падения объектива, его ни в коем случае
нельзя переносить , держась только за бленду объектива.
Примечания об использовании фильтра
Вместе с установленным фильтром можно прикрепить крышку
объектива объектива или бленду .
Если одновременно установить несколько фильтров, на записанных
изображениях может появиться небольшое затемнение.
Кроме фильтров , к передней части объектива невозможно прикрепить
какие-либо принадлежности, например преобразовательный объектив
или адаптер, и использовать вместе с объективом.
Прикрепление таких принадлежностей может привести к
повреждению объектива.
Не допускайте попадания на объектив инсектицидов и
летучих химических веществ.
При попадании на объектив такие вещества могут повредить
объектив или привести к отслаиванию краски.
Не направляйте объектив на солнце или другие источники
сильного света.
Это может привести к поступлению чрезмерного количества
света и вызвать возгорание .или неисправность
В случае использования в течение длительного времени при
низкой температуре не прикасайтесь непосредственно к объективу.
В холодных местах ( , с температурой ниже 0 oC, например на
лыжных склонах), прямой продолжительный контакт с
объективом может привести к повреждениям кожи. При
длительном использовании объектива надевайте перчатки.
Чтобы удалить загрязнения, осторожно протрите изделие
сухой мягкой тканью без пыли.
Не используйте для чистки такие растворители, как бензин,
разбавитель, спирт, моющие средства для кухни и т.д., поскольку это
может привести к деформации корпуса либо отслоению покрытия.
Не используйте салфетки .с химическими веществами
Не допускайте длительного контакта с объективом изделий из
резины, ПВХ или подобных материалов.
Запрещается разбирать или изделие вносить изменения в.
Если объектив не будет использоваться в течение длительного времени,
рекомендуется хранить его влагопоглотителем вместе с (силикагелем).
Если объектив не использовался в течение длительного
времени, до съемки проверьте все его составные части.
Избегайте использования или хранения объектива в каком- либо
из перечисленных мест, т. к. это может привести к проблемам в
работе или неисправности:
Под воздействием прямых солнечных лучей или на пляже летом
В с высокой местах температурой и влажностью или резкими
перепадами температуры и влажности
В с местах большим количеством пыли или песка
Возле огня
Возле обогревателей, кондиционеров или увлажнителей
В с местах рядом водой, где объектив может намокнуть
Где присутствует вибрация
В автомобиле
См. также инструкцию по эксплуатации цифровой фотокамеры.
Этот звук вызван перемещением внутренних линз или работой
диафрагмы и не свидетельствует о неисправности.
Для улучшения работы изделия его технические характеристики
могут быть .изменены
СМЕННЫЙ ОБЪЕКТИВ ДЛЯ ЦИФРОВОЙ ФОТОКАМЕРЫ
“LEICA DG VARIO-ELMARIT 35-100mm/F2.8/POWER O.I.S.”
Информация для покупателя
Установленный производителем в порядке п. 2 ст. 5 Федерального
Закона РФО защите прав потребителейсрок службы данного
изделия равен 7 годам с даты производства при условии, что изделие
используется в строгом соответствии с настоящей инструкцией по
эксплуатации и применимыми техническими стандартами.
Импортёр
ООО «Панасоник Рус»
Россия, 115162, Москва, ул. Шаболовка, д Г.31 , этаж/ помещение
антресоль 1этажа/10
тел. 8-800-200-21-00
Bildwinkel
34x (Weitwinkel) bis 12x (Tele)
Schärfebereich
0,85 m bis (von der Bezugslinie für Fokusentfernung)
Maximale Vergrößerung
0,1k (Kleinbild-Äquivalent: 0,2k)
Optischer bildstabilisator
Ja
Filterdurchmesser
58 mm
Max. Durchmesser
67,4 mm
Gesamtlänge
Ca. 99,9 mm (vom Rand des Objektivs bis zur Grundseite der
Objektivfassung)
Gewicht
Ca. 360 g
Staub- und Spritzwasserschützt
Ja
Empfohlene Betriebstemperatur
j o o10 C bis 40 C
Zulässige relative Luftfeuchtigkeit
10 %RH bis 80 %RH
Información para su seguridad
Eliminación de Aparatos Viejos
Solamente para la Unión Europea y países con
sistemas de reciclado.
Este símbolo en los productos, su embalaje o en los
documentos que los acompañen significa que los
productos eléctricos y electrónicos usadas no deben
mezclarse con los residuos domésticos.
Para el adecuado tratamiento, recuperación y reciclaje de
los productos viejos llévelos a los puntos de recogida de
acuerdo con su legislación nacional.
Si los elimina correctamente ayudará a preservar
valiosos recursos y evitará potenciales efectos negativos sobre la
salud de las personas y sobre el medio ambiente.
Para más información sobre la recogida o reciclaje, por favor
contacte con su ayuntamiento.
Puede haber sanciones por una incorrecta eliminación de este
residuo, de acuerdo con la legislación nacional.
Prevención contra las averías
B
Accesorios suministrados
C
Nombres y funciones de los
componentes
ESPAÑOL
D
Colocar la lente
Precauciones para el uso
Búsqueda de averías
Cuando se enciende o apaga la cámara digital o cuando se
sacude la lente, se oye un sonido de traqueteo.
Hay un sonido que proviene de la lente cuando se toman igenes.
Especificaciones
Montura
Montaje Micro Four Thirds
Longitud focal
f=35 mm a 100 mm (Igual a una cámara de película de 35 mm:
70 mm a 200 mm)
Estructura de la lente
18 elementos en 13 grupos (1 lente UED, 2 lentes ED)
Tipo de abertura
7 aspas de diafragma/Diafragma de apertura circular
Apertura máxima
F2.8
Valor de abertura mínimo
F22
Ángulo visual
34x (Gran angular) a 12o (Teleobjetivo)
En la distancia del enfoque
0,85 m (2,8 pies) a (desde la línea de referencia de la distancia de
enfoque)
Máxima ampliación de la imagen
0,1k (Igual a una cámara de película de 35 mm: 0,2k)
Estabilizador óptico de la imagen
Diámetro del filtro
58 mm
Diámetro máximo
67,4 mm (2,7q)
Longitud total
Aprox. 99,9 mm (3,9q)
(desde la punta de la lente en hasta el lado base
del montaje de la lente)
Masa
Aprox. 360 g (0,79 lb)
Resistencia al polvo y a las salpicaduras
Temperatura de funcionamiento recomendada
j o o o o10 C a 40 C (14 F a 104 F)
Humedad relativa admisible
10 %RH a 80 %RH
Informazioni per la sua sicurezza
Smaltimento di vecchie apparecchiature
Solo per Unione Europea e Nazioni con sistemi di
raccolta e smaltimento
Questo simbolo sui prodotti, sull’imballaggio e/o sulle
documentazioni o manuali accompagnanti i prodotti
indica che i prodotti elettrici, elettronici non devono
essere smaltiti come rifiuti urbani p2-ma deve essere
effettuata una raccolta separata.
Per un trattamento adeguato, recupero e riciclaggio di vecchi
prodotti vi invitiamo a consegnarli agli appositi punti di
raccolta secondo la legislazione vigente nel vostro paese.
Con uno smaltimento corretto, contribuirete a salvare
importanti risorse e ad evitare i potenziali effetti negativi
sulla salute umana e sull’ambiente.
Per ulteriori informazioni su raccolta e riciclaggio, vi invitiamo a
contattare il vostro comune.
Lo smaltimento non corretto di questi rifiuti potrebbe comportare
sanzioni in accordo con la legislazione nazionale.
Prevenzione guasti
B
Accessori in dotazione
C
Nomi e funzioni dei componenti
ITALIANO
D
Installazione dell’obiettivo
Precauzioni per l’uso
Ricerca guasti
Quando si accende o si spegne la fotocamera digitale o si scuote
l’obiettivo, si sente un tintinnio.
Quando si scattano foto si sente un suono proveniente dall’obiettivo.
Specifiche
Supporto
Micro Four Thirds Mount
Distanza focale
f=35 mm a 100 mm (equivalente per fotocamera con pellicola da
35 mm: 70 mm a 200 mm)
Costruzione dell’obiettivo
18 elementi in 13 gruppi (1 lente UED, 2 lenti ED)
Tipo di apertura
Diaframma con 7 lamelle/Diaframma ad apertura circolare
Apertura massima
F2.8
Valore minimo dell’apertura
F22
Profondità di campo
34x (Gran angular) a 12o (Teleobjetivo)
Distanza di messa a fuoco
0,85 m a (dalla linea di riferimento della distanza di messa a
fuoco)
Ingrandimento massimo dell’immagine
0,1k (equivalente per fotocamera con pellicola da 35 mm: 0,2k)
Stabilizzatore ottico di immagine
Diametro filtro
58 mm
Diametro massimo
67,4 mm
Lunghezza complessiva
Circa 99,9 mm (dall’estremità dell’obiettivo al lato di base del
supporto dell’obiettivo)
Massa
Circa 360 g
Resistenza alla polvere ed agli schizzi
Temperatura operativa raccomandata
j o o10 C a 40 C
Umidità relativa accettabile
10 %RH a 80 %RH
中文
中文
中文
中文中文 繁體
繁體
繁體
繁體繁體 ( )
安全
安全
安全
安全安全
預防
預防
預防
預防預防
操作
操作
操作
操作操作照表
照表
照表
照表照表
B
提供的配
提供的配
提供的配
提供的配
C
元件
元件
元件
元件元件
D
鏡頭
鏡頭
鏡頭
鏡頭鏡頭
使
使
使
使使
數位機在啟或關閉或晃動鏡頭
數位機在啟或關閉或晃動鏡頭
數位機在啟或關閉或晃動鏡頭
數位機在啟或關閉或晃動鏡頭數位機在啟或關閉或晃動鏡頭
到喀噠聲等
到喀噠聲等
到喀噠聲等
到喀噠聲等到喀噠聲等
拍攝過程鏡頭發聲音
拍攝過程鏡頭發聲音
拍攝過程鏡頭發聲音
拍攝過程鏡頭發聲音拍攝過程鏡頭發聲音
鏡頭接口
鏡頭接口
鏡頭接口
鏡頭接口
Micro Four Thirds 接口
焦距
焦距
焦距
焦距焦距
f=35 mm 100 mm (相當35 mm 70 mm 200 mm
鏡頭
鏡頭
鏡頭
鏡頭頭結
18 13 鏡片1 UED 2 ED 鏡片)
光圈
光圈
光圈
光圈
7 /光圈葉片 圓形光圈
最大光圈
最大光圈
最大光圈
最大光圈大光
F2.8
最小光圈
最小光圈
最小光圈
最小光圈最小光圈
F22
視角
視角
視角
視角視角
34x角) 12x(遠
In focus
焦點
焦點
焦點
距離
距離
距離
距離距離
0.85 m從對焦距離準線開
最大影像
最大影像
最大影像
最大影像最大影像
0.1k (相當35 mm 0.2k
光學影像
光學影像
光學影像
光學影像光學影像
濾鏡
濾鏡
濾鏡
濾鏡鏡直
58 mm
最大
最大
最大
最大
67.4 mm
總長
總長
總長
總長
99.9 mm 鏡頭的頂端鏡頭接口準面)
重量
重量
重量
重量重量
360 g
防濺
防濺
防濺
防濺
j o o10 C 40 C
的相
的相
的相
的相的相
10 %RH 80 %RH
Информация для вашей безопасности
Правила эксплуатации
Panasonic Entertainment
& Communication Co., Ltd.
РУССКИЙ ЯЗЫК
B
Принадлежности, входящие в
комплект
C
Названия и функции составных частей
D
Прикрепление объектива
Предосторожности при использовании
фотокамеры
Устранение неисправностей
При включении или выключении цифровой фотокамеры
либо сотрясении объектива раздается дребезжащий звук.
При объектива съемке из раздается звук.
Технические характеристики
Крепление
Крепление Micro Four Thirds
Фокусное расстояние
f=35 мм до 100 мм (Эквивалент 35 мм пленочной камеры: от
70 мм )до 200 мм
Конструкция объектива
18 элементов в 13 группах (1 линза из стекла UED, 2 линзы из
стекла ED)
Тип диафрагмы
7 /лепестков диафрагмы кольцевая диафрагма
Максимальный показатель диафрагмы
F2.8
Минимальное значение диафрагмы
F22
Угол обзора
34x (Широкоугольный режим) до 12x (Телережим)
Фокусное расстояние от
0,85 м до (от линии отсчета расстояния до объекта съемки)
Максимальное увеличение изображения
0,1k (Эквивалент 35 мм )пленочной камеры: 0,2k
Оптический стабилизатор изображения
Да
Диаметр фильтра
58 мм
Максимальный диаметр
67,4 мм
Полная длина
Прибл. 99,9 мм (от края объектива объектива до основания крепления )
Масса
Прибл. 360 г
Пылезащищённость и брызгозащищенность
Да
Рекомендуемая рабочая температура
O Cтj10 oC до 40 o
Допустимая относительная влажность
Oт 10 %RH до 80 %RH
Название продукции
Сменный объектив для
цифровой фотокамеры
Страна производства Китай
Название производителя
Панасоник Энтертейнмент
энд Коммюникейшн Ко., Лтд.
Юридический адрес
1-10-12 Ягумо- - хигаши мати, Моригути
Сити, Осака 570-0021, Япония
Дата производства: Вы можете уточнить и год месяц по
серийному номеру на табличке.
Пример маркировкиСерийный номер XX1AXXXXXXX
(X-любая цифра или буква)
Год: Третья цифра в серийном номере (1—2021 2022 2030, 2 , ... 0 )
Месяц: Четвертая yб ква в серийном номере (A—Январь,
B—Февраль, ...L—Декабрь)
Примечание: Сентябрь может указываться как “Sвместо “I”.
Дополнительная информация
Пожалуйста внимательно прочитайте
инструкцию по эксплуатации.


Produkt Specifikationer

Mærke: Panasonic
Kategori: Linse
Model: H-ES35100

Har du brug for hjælp?

Hvis du har brug for hjælp til Panasonic H-ES35100 stil et spørgsmål nedenfor, og andre brugere vil svare dig