Panduit FMT1A Manual

Panduit Ikke kategoriseret FMT1A

Læs gratis den danske manual til Panduit FMT1A (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Panduit FMT1A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

CONTENTS: (#) indicates FMT2A quantity

OPTICOM QUICKNET Rack Mount Angled Fiber

Cassette Enclosures and Patch Panels

Part Numbers: FMT1A, FMT2A, CFAPPBL1A, CFAPPBL2A

1 - ENCLOSURE

1 (2) - #10-32 x 5/16" SCREWS

4 (5) - #10-32 HEX NUTS

4 - #12-24 x 1/2" SCREWS

4 - M6 x 1 SCREWS

3 - #10 FLAT WASHERS

1 (2) - CABLE ENTRY GROMMET(S)

1 (2) - STRAIN RELIEF BRACKET(S)

2 - ADHESIVE BEVEL ENTRY CLIPS

2 - ADHESIVE BACKED MOUNTS

4 - TAK-TYs (6" pcs.)

2 - SLACK SPOOLS (FMS1 or FMS2)

Cover (field removable)

Fiber Adapter Panels (FAPs):

Up to 4 for FMT1A

Up to 8 for FMT2A

(sold separately) Trunk or Interconnect

Cable Entry Grommet

Strain Relief Bracket

Enclosure

CFAPPBL1A

CFAPPBL2A

PG16 Gland

(customer supplied)

1 - CAUTION LABEL

1 - LASER WARNING LABEL

Page 1 of 8

Angled Patch Panel

(CFAPPBL1A shown)

FMT1A FMT2A

(sold separately)

ASSEMBLY VIEW showing Fiber Adapter Panels (FAPs) - sold separately

CAUTION:

Fiber optic cable is sensitive to excessive pulling, bending and crushing forces. Consult the manufacturer’s cable specification sheet for

the specific cable in use.

Follow TIA/EIA-568A, 569, 606, and 607 installation guidelines where applicable.

Care should be taken when opening and closing fully loaded drawer in order to protect fiber components.

WARNING: UNMATED CONNECTORS MAY EMIT INVISIBLE LASER RADIATION. DO NOT LOOK DIRECTLY INTO THE END OF THE

CONNECTOR. DO NOT INSPECT WITH MAGNIFYING DEVICES. MAINTAIN CAP ON UNMATED CONNECTORS.

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Determine where the cable will enter the

enclosure. Carefully remove the knock-out so as

not to damage the surrounding sheet metal.

DO NOT install the grommet at this stage.

Grommet will be installed after the enclosure is

mounted to the rack.

To remove the cover, unscrew the #10-32 screw,

slide the cover back, lift up and off.

Preparation and Rack Mounting

Figure 3

#10-32 hex nuts and

#10 flat washers

#10-32 screw

Attach the angled patch panel to the enclsoure

with (2) #10 flat washers and (2) #10-32 hex nuts.

Page 2 of 8

Figure 2

Figure 1

Cover

Produkt Specifikationer

Mærke:	Panduit
Kategori:	Ikke kategoriseret
Model:	FMT1A

Har du brug for hjælp?

Hvis du har brug for hjælp til Panduit FMT1A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panduit Manualer

Panduit MEHT187 Manual

29 December 2024

Panduit DIRBB2007S21W Manual

29 December 2024

Panduit CDE3 Manual

29 December 2024

Panduit EC001 Manual

29 December 2024

Panduit PZICE Manual

15 December 2024

Panduit PZICEA Manual

15 December 2024

Panduit PZNDVK Manual

15 December 2024

Panduit DIRLC9606RB1 Manual

11 December 2024

Panduit EA001 Manual

9 December 2024

Panduit FPONE2 Manual

14 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet XGPN-100 Manual

15 Juni 2025

Proficook PC-EKA 1283 Manual

15 Juni 2025

OmniMount OBSP8 Manual

15 Juni 2025

Levenhuk FS10 Manual

15 Juni 2025

Vestil PM4-2148-LP Manual

15 Juni 2025

ElectriQ STRV-W1-B Manual

15 Juni 2025

Adler AD 4521 Manual

15 Juni 2025

AMX HydraPort HPX-AV102 Manual

15 Juni 2025

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025