Panduit PEHF3 Manual


Læs gratis den danske manual til Panduit PEHF3 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Panduit PEHF3, eller vil du spørge andre brugere om produktet?

Side 1/2
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011 CM508B
PatchRunnerTM Enhanced Horizontal Front-Only
Manager
Part Number(s): PEHF2, PEHF3, PEHF4
PEHF2 PEHF3 PEHF4
Loosen screws
(both sides of part)
Prior to Installation
Step 1 (all configurations): Loosen mounting screws on both sides of
part. See Figure 1 for locations.
AND
Step 2 (mounting with PatchRunner
TM Enhanced Vertical Manager):
Slide both side mounting brackets as far back as possible. See Figure
2.1.
OR
Step 2 (mounting with PatchRunnerTM Vertical Manager): Align
marking on both mounting brackets with center of screws. See Figure
2.2.
OR
Step 2 (mounting with cabinet): Slide mounting brackets as far for-
ward as possible. See Fig. 2.3.
AND
Step 3 (all configurations): Tighten mounting screws on both sides of
part.
Figure 1
Figure 2.1 Figure 2.2 Figure 2.3
PatchRunnerTM Enhanced Horizontal Front-Only Managers include (1) Manager, (1) Door, and #12-24 Screws for Mounting to Vertical
Equipment.
Installation with PatchRunnerTM Enhanced Vertical Manager (PEV) on 2 or 4 Post Rack
Attach PatchRunnerTM Enhanced Horizontal
Front-Only Manager to desired location on Verti-
cal Equipment using #12-24 Screws.
#12-24 Screws
PEV
Vertical Rack
PatchRunnerTM Enhanced
Horizontal Front-Only
Manager
E-mail:
cs@panduit.com
Fax:
(708) 444-6448
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
Page 2 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2011 CM508B
www.panduit.com
Installation with PatchRunnerTM Vertical Manager (PRV) on 2 or 4 Post Rack
Attach PatchRunner
TM Enhanced Horizontal
Front-Only Manager to desired location on Verti-
cal Equipment using #12-24 Screws.
#12-24 Screws
PRV
Vertical Rack
PatchRunnerTM Enhanced
Horizontal Front-Only
Manager
Installation with Cabinet
Attach PatchRunner
TM Enhanced Horizontal Front-
Only Manager to desired location on Vertical
Equipment using #12-24 Screws.
PatchRunnerTM Enhanced
Horizontal Front-Only
Manager
Cabinet-Doors and Side
Panels removed for clarity
Vertical Equipment
Rails
Door Installation
Install Doors to PatchRunner
TM Enhanced Horizontal Front-Only Manager by align-
ing the door hinges with knuckles on the fingers and press until door snaps into
place. Door may be opened up or down by pulling on opposite side of door.
Door
Door Opening Up
Door Opening Down
#12-24 Screws


Produkt Specifikationer

Mærke: Panduit
Kategori: Ikke kategoriseret
Model: PEHF3

Har du brug for hjælp?

Hvis du har brug for hjælp til Panduit PEHF3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Panduit Manualer

Panduit

Panduit MEHT187 Manual

29 December 2024
Panduit

Panduit DIRBB2007S21W Manual

29 December 2024
Panduit

Panduit CDE3 Manual

29 December 2024
Panduit

Panduit EC001 Manual

29 December 2024
Panduit

Panduit PZICE Manual

15 December 2024
Panduit

Panduit PZICEA Manual

15 December 2024
Panduit

Panduit PZNDVK Manual

15 December 2024
Panduit

Panduit DIRLC9606RB1 Manual

11 December 2024
Panduit

Panduit EA001 Manual

9 December 2024
Panduit

Panduit FPONE2 Manual

14 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer