Panduit RT2HT Manual

Panduit Ikke kategoriseret RT2HT

Læs gratis den danske manual til Panduit RT2HT (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Panduit RT2HT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Website: www.panduit.com

E-mail: techsupport@panduit.com

For Technical Support:

888-506-5400, ext. 83255

RT2HT

MLT TENSIONING TOOL

INTRODUCTION

The RT2HT Tool installs Panduit Pan-Steel coated and

uncoated MLTEH (Extra Heavy Cross Section), MLTEH15

(Extra Heavy Cross Section .015” Thick Body), and

MLTSH (Super Heavy Cross Section .015” and .025”

Thick Body) stainless steel ties.

Note: This tool is not intended for other uses such as

cutting or tensioning other types of fastening

devices.

TOOL FEATURES

A. Rear Handle

B.* Tension Pawl Release - Knob pointing towards the front

of tool for pawl engagement and to rear of tool for

disengagement.

C.* Anti-Backup Pawl Release - Lever up against tool for

pawl engagement and pulled down to disengage pawl.

D.* Detent Lock Pins - For controlled tension, pull both pins

forward; for manual tension, push both pins backward.

E. Cutter Handle - Cuts tie when tie is tensioned properly.

F. Cutter Blade

G. Tensioning Mandrel

H.* Tension Indicator Window - Located on the back of front

handle.

I.* Adjustment Knob - Adjust tension of tie application and

lock to desired tension with tension locking screw.

J. Tension Locking Screw

K. Front Handle - With ratchet controlled tensioning.

* See Page 2 for Feature Detail

FIGURE 1

TOOL OPERATION

1. Loop tie around bundle, thread tie into nose of tool and

through slot of tensioning mandrel.

2. Pull front handle to tension tie. Under controlled tension,

the front handle will break free when pre-determined

tension is attained.

3. Push cutter lever downward to cut tie.

4. Remove cut-off portion of tie from tool.

PA25757A01

Rev: 01 12-2012

FIGURE 2

RT2HT: PA25757A01_01 Page: 1 of 2 12-2012

PUSH BACKWARD

FOR MANUAL

TENSION

PULL FORWARD

FOR CONTROLLED

TENSION

TROUBLESHOOTING

TO RELEASE AND REMOVE TIE

FROM TOOL BEFORE CUTTING,

DISENGAGE BOTH KNOB AND

LEVER.

MULTI-POSITION HANDLE

ALLOWS ACCESS TO TIGHT AREAS.

TOOL MAINTENANCE

TO INHIBIT CORROSION AND MAINTAIN PERFORMANCE OF THE TOOL, KEEP THE METAL SURFACES COATED

WITH A LIGHT OIL (WD-40 ®OR EQUIVALENT).

LOW

TENSION

HIGH

TENSION

ADJUSTMENT

KNOB

TENSION

INDICATOR

WINDOW

TENSION LOCKING

SET SCREW

TIE SIZE SETTING

1/2” (EH) TIE 1 – 2

1/2” (EH15) TIE 1 – 4

5/8” (SH) TIE 1 – 7

RT2HT MLT TENSIONING TOOL

RT2HT: PA25757A01_01 Page: 2 of 2 12-2012

Produkt Specifikationer

Mærke:	Panduit
Kategori:	Ikke kategoriseret
Model:	RT2HT

Har du brug for hjælp?

Hvis du har brug for hjælp til Panduit RT2HT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panduit Manualer

Panduit C2CAC06ABWPAB1 Manual

2 September 2025

Panduit MIW094 Manual

2 September 2025

Panduit MIW125 Manual

2 September 2025

Panduit PES400 Manual

2 September 2025

Panduit CUCGF06DPW1 Manual

2 September 2025

Panduit CUEFRCKITW1 Manual

2 September 2025

Panduit MIM125 Manual

2 September 2025

Panduit CUSREORCPB1 Manual

2 September 2025

Panduit VS2-AVT-3IB Manual

27 August 2025

Panduit VS-AVT-C08-L10 Manual

27 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Turbo Air TBC-65SB-N6 Manual

2 September 2025

Speco Technologies N4WNRMM Manual

2 September 2025

Fromm & Starck STAR_FR_04 Manual

2 September 2025

XPower BR-282A Manual

2 September 2025

Grunkel SAN-GRILLNG Manual

2 September 2025

Phoenix Contact BL2 PPC AIO65 7000 Manual

2 September 2025

AVer DL10 Manual

2 September 2025

Rigol HDO1204 Manual

2 September 2025

XPower A-2B Manual

2 September 2025

Horizon Micro FCJJ-44 Manual

2 September 2025