Pyle PWD501 Manual

Pyle Alarmsystem PWD501

Læs gratis den danske manual til Pyle PWD501 (24 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Pyle PWD501, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

STANDARD FEATURES

Some of the system’s standard features include:

• 4-button remote transmitter

• LED Status indicator

• Valet switch

• Extended Range Receiver

• 125dB Multi-tone siren

• Dual stage impact detector

• Remote panic

• Remote Valet mode

• Remote chirp delete

• Remote sensor bypass

• Passive or active arming

• Flashing parking lights

• Auto Rearming

OPTIONAL FEATURES

This system has many optional features that

may require additional parts and/or labor.

Please contact your dealer for more details.

• Remote keyless entry (door lock/unlock)

• Illuminated entry

• LCD 2-way Remote

• Hood & trunk protection

• Trunk/hatch release

• Window roll-up

• Additional sensors

• Remote Start (optional plug-in module)

• Stop & Go Feature

• Auto Cold Start

Note: Some features may not be appropriate

for certain vehicles.

REMOTE TRANSMITTER BUTTONS

NOTE: Transmitter cosmetics may differ

between models and between standard 1-way

and LCD 2-way transmitters, but button

functions remain the same as described below.

Each transmitter button has two operating

modes: standard and level shifted. Pressing a

transmitter button for less than one second

activates the standard function associated with

that button (such as arm or disarm). Pressing a

button for more than one second changes the

color of the standard transmitter’s LED to

green and activates the level shift feature.

While the LED is green (level shifted), pressing

any transmitter button accesses another level

of commands providing expanded operation.

Transmitter Icons

Button 1 Button 2

Button 3 Button 4

SYSTEM MANUAL

VEHICLE SECURITY SYSTEM

Optional Remote Start Module and 2-way Transmitter Instructions Included

ARMING OPERATION

To arm the system press transmitter button 1:

• The siren will chirp once.

• The parking lights will ﬂash once.*

• The doors will lock.*

• The LED will turn solid for 10 seconds

then start flashing slowly. After 10

seconds the system is armed.

During Arming, if an open hood or trunk is

detected, the system will wait 10 seconds for

the zone to close. If a door is open the system

will wait up to 60 seconds for the zone to close

(depending on door zone setting during

installation). If a zone remains open after the

wait period, the siren will chirp, the parking

lights will ﬂash 4 times to indicate the zone is

still open. The system will then ignore that

zone, but keep all other areas protected.

While Armed, the system will trigger if:

• The door, hood, or trunk is opened.

• The shock sensor detects an impact.

• An optional sensor is disturbed.

When triggered by the door or hood/trunk

input the siren will sound, the horn will honk,

and the parking lights will ﬂash for 30 seconds.

If triggered by a sensor, the alarm cycle will last

15 seconds. If the alarm is triggered while the

optional remote start is engaged, the remote

start will immediately shut down.

If a zone triggers the system 3 times during a

single arming cycle, the system will bypass that

zone, keeping the other zones protected, until

the next time the system is armed.

If the shock sensor detects a light impact to the

vehicle or an optional sensor is disturbed, the

system will chirp and the parking lights will ﬂash

5 times to warn away the potential intruder.

*Optional Feature

PASSIVE ARMING OPERATION

The passive arming feature allows the

system to arm automatically without user

intervention.This feature can be toggled on/off

using the transmitter.

To turn passive arming on/off:

1. Press and hold button 2 for level shift.

2. Press button 4.

• The system will enter passive arming

operation mode.

• The optional 2-way LCD transmitter

display will show “LAST DOOR ARM”.

To arm the system passively:

1. Turn the ignition key oﬀ.

2. Exit the vehicle and close all doors.

• The siren will chirp and parking lights

will flash once after closing the last door.

• The LED ﬂashes rapidly indicating that

the system is preparing to arm. (The

system can be armed at any time by

pressing transmitter button 1.) NOTE:

Opening the hood/trunk or a door

resets the passive arming timer.

• After 30 seconds the siren will chirp to

indicate the system is armed. •

The doors will lock.†*

†If Passive Locking was enabled during installation.

DISARMING OPERATION

To disarm the system press transmitter button 2.

• The siren will chirp twice.¥

• The parking lights will flash twice.¥

• The doors will unlock.*

• The dome light will turn on.*

¥If the alarm was triggered while away, the system will respond

with 3 chirps and 4 parking light flashes.

*Optional Feature.

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Alarmsystem
Model:	PWD501
Brugervejledning:	Ja
Produktfarve:	Sort
Kontroltype:	Knapper
Skærmtype:	LCD
Wi-Fi:	Ingen
Understøttelse af Smartphone-fjernbetjening:	Ingen
Alarm decibel:	125 dB
Indgangsspænding:	12 V
Antal enheder der er tilsluttet samtidigt (maks.):	2
Antal bevægelsessensorer:	- stk
Antal dør/vindue sensorer:	- stk
Antal fjernbetjeninger:	2 stk
Antal understøttede fjernbetjeninger:	2